unions (IDFGH-13714)

[divakar123jerpiti]

Answers checklist.

• I have read the documentation ESP-IDF Programming Guide and the issue is not addressed there.
• I have updated my IDF branch (master or release) to the latest version and checked that the issue is present there.
• I have searched the issue tracker for a similar issue and not found a similar issue.

IDF version.

v5.1.1

Espressif SoC revision.

esp32-s3

Operating System used.

Windows

How did you build your project?

VS Code IDE

If you are using Windows, please specify command line type.

None

Development Kit.

esp32-wroom-1

Power Supply used.

USB

What is the expected behavior?

while initialising union data members it is not initiating properly

What is the actual behavior?

unknown type name esp_lcd_rgb_panel_event_data_t

Steps to reproduce.

esp_lcd_rgb_panel_config_t panel_config = {
.data_width = 16, // RGB565 in parallel mode, thus 16bit in width
.psram_trans_align = 64,
.num_fbs = EXAMPLE_LCD_NUM_FB,
#if CONFIG_EXAMPLE_USE_BOUNCE_BUFFER
.bounce_buffer_size_px = 10 * EXAMPLE_LCD_H_RES,
#endif
.clk_src = LCD_CLK_SRC_DEFAULT,
.disp_gpio_num = EXAMPLE_PIN_NUM_DISP_EN,
.pclk_gpio_num = EXAMPLE_PIN_NUM_PCLK,
.vsync_gpio_num = EXAMPLE_PIN_NUM_VSYNC,
.hsync_gpio_num = EXAMPLE_PIN_NUM_HSYNC,
.de_gpio_num = EXAMPLE_PIN_NUM_DE,
.data_gpio_nums = {
EXAMPLE_PIN_NUM_DATA0,
EXAMPLE_PIN_NUM_DATA1,
EXAMPLE_PIN_NUM_DATA2,
EXAMPLE_PIN_NUM_DATA3,
EXAMPLE_PIN_NUM_DATA4,
EXAMPLE_PIN_NUM_DATA5,
EXAMPLE_PIN_NUM_DATA6,
EXAMPLE_PIN_NUM_DATA7,
EXAMPLE_PIN_NUM_DATA8,
EXAMPLE_PIN_NUM_DATA9,
EXAMPLE_PIN_NUM_DATA10,
EXAMPLE_PIN_NUM_DATA11,
EXAMPLE_PIN_NUM_DATA12,
EXAMPLE_PIN_NUM_DATA13,
EXAMPLE_PIN_NUM_DATA14,
EXAMPLE_PIN_NUM_DATA15,
}

Debug Logs.

No response

More Information.

No response

[sudeep-mohanty]

Hi @divakar123jerpiti, Could you please check if you have esp_lcd_panel_rgb.h header file included in your application?