We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Using ESP v5.3.1. ESP32-S3 on a M5stack Stamp https://shop.m5stack.com/products/m5stamp-esp32s3-module
When I run the example it detects the USB flash Drive, but I get the following error.
E (8076) esp_msc_host: ./main/esp_msc_host.c:121 (msc_host_task):Failed to register VFS
Here is the terminal output.
I (27) boot: ESP-IDF v5.3.1 2nd stage bootloader I (27) boot: compile time Sep 7 2024 12:51:08 I (27) boot: Multicore bootloader I (30) boot: chip revision: v0.1 I (34) boot.esp32s3: Boot SPI Speed : 80MHz I (39) boot.esp32s3: SPI Mode : DIO I (43) boot.esp32s3: SPI Flash Size : 8MB I (48) boot: Enabling RNG early entropy source... I (53) boot: Partition Table: I (57) boot: ## Label Usage Type ST Offset Length I (64) boot: 0 nvs WiFi data 01 02 00009000 00006000 I (72) boot: 1 phy_init RF data 01 01 0000f000 00001000 I (79) boot: 2 factory factory app 00 00 00010000 00100000 I (87) boot: End of partition table I (91) esp_image: segment 0: paddr=00010020 vaddr=3c040020 size=10a08h ( 68104) map I (112) esp_image: segment 1: paddr=00020a30 vaddr=3fc93c00 size=02bf4h ( 11252) load I (114) esp_image: segment 2: paddr=0002362c vaddr=40374000 size=0c9ech ( 51692) load I (129) esp_image: segment 3: paddr=00030020 vaddr=42000020 size=359ech (219628) map I (168) esp_image: segment 4: paddr=00065a14 vaddr=403809ec size=03168h ( 12648) load I (178) boot: Loaded app from partition at offset 0x10000 I (178) boot: Disabling RNG early entropy source... I (190) cpu_start: Multicore app I (199) cpu_start: Pro cpu start user code I (199) cpu_start: cpu freq: 160000000 Hz I (199) app_init: Application information: I (202) app_init: Project name: z I (206) app_init: App version: 1 I (211) app_init: Compile time: Sep 7 2024 12:50:57 I (217) app_init: ELF file SHA256: 44bf17c65... I (222) app_init: ESP-IDF: v5.3.1 I (227) efuse_init: Min chip rev: v0.0 I (232) efuse_init: Max chip rev: v0.99 I (237) efuse_init: Chip rev: v0.1 I (241) heap_init: Initializing. RAM available for dynamic allocation: I (249) heap_init: At 3FC97140 len 000525D0 (329 KiB): RAM I (255) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM I (261) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM I (267) heap_init: At 600FE100 len 00001EE8 (7 KiB): RTCRAM I (274) spi_flash: detected chip: gd I (277) spi_flash: flash io: dio I (281) sleep: Configure to isolate all GPIO pins in sleep state I (288) sleep: Enable automatic switching of GPIO sleep configuration I (296) main_task: Started on CPU0 I (326) main_task: Calling app_main() I (356) esp_msc_host: Waiting for USB stick to be connected I (356) esp_msc_host: MSC Host Install Done I (356) usb_msc_ota: ESP_MSC_OTA_START I (356) esp_msc_ota: Waiting for MSC device to connect... I (7166) esp_msc_host: MSC device connected I (7166) esp_msc_host: connection... *** Device descriptor *** bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0x0 bDeviceSubClass 0x0 bDeviceProtocol 0x0 bMaxPacketSize0 64 idVendor 0x90c idProduct 0x1000 bcdDevice 1.00 iManufacturer 1 iProduct 2 iSerialNumber 3 bNumConfigurations 1 *** Configuration descriptor *** bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 bMaxPower 300mA *** Interface descriptor *** bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 0x8 bInterfaceSubClass 0x6 bInterfaceProtocol 0x50 iInterface 0 *** Endpoint descriptor *** bLength 7 bDescriptorType 5 bEndpointAddress 0x1 EP 1 OUT bmAttributes 0x2 BULK wMaxPacketSize 64 bInterval 0 *** Endpoint descriptor *** bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 0x2 BULK wMaxPacketSize 64 bInterval 0 Device info: Capacity: 122376 MB Sector size: 512 Sector count: 250626565 PID: 0x1000 VID: 0x 90C iProduct: Type-C iManufacturer: Samsung iSerialNumber: 0375723050002816 E (8076) esp_msc_host: ./main/esp_msc_host.c:121 (msc_host_task):Failed to register VFS I (8076) esp_msc_host: Waiting for USB stick to be connected
The text was updated successfully, but these errors were encountered:
refer espressif/esp-idf#14578
Sorry, something went wrong.
No branches or pull requests
Answers checklist.
General issue report
Using ESP v5.3.1. ESP32-S3 on a M5stack Stamp
https://shop.m5stack.com/products/m5stamp-esp32s3-module
When I run the example it detects the USB flash Drive, but I get the following error.
Here is the terminal output.
The text was updated successfully, but these errors were encountered: