@ethereumjs/evm

TypeScript implementation of the Ethereum EVM.

Installation

To obtain the latest version, simply require the project using npm:

npm install @ethereumjs/evm

This package provides the core Ethereum Virtual Machine (EVM) implementation which is capable of executing EVM-compatible bytecode. The package has been extracted from the @ethereumjs/vm package along the VM v6 release.

Note: Starting with the Dencun hardfork EIP-4844 related functionality will become an integrated part of the EVM functionality with the activation of the point evaluation precompile. It is therefore strongly recommended to always run the EVM with a KZG library installed and initialized, see KZG Setup for instructions.

Usage

Basic

With the v2 release (Summer 2023) the EVM/VM packages have been further decoupled and it now possible to run the EVM package in isolation with reasonable defaults.

The following is the simplest example for an EVM instantiation:

// ./examples/simple.ts

import { createEVM } from '@ethereumjs/evm'
import { hexToBytes } from '@ethereumjs/util'

const main = async () => {
  const evm = await createEVM()
  const res = await evm.runCode({ code: hexToBytes('0x6001') }) // PUSH1 01 -- simple bytecode to push 1 onto the stack
  console.log(res.executionGasUsed) // 3n
}

void main()

Note: with the switch from v2 to v3 the old direct new EVM() constructor usage has been deprecated and an EVM now has to be instantiated with the async static EVM.create() constructor.

Blockchain, State and Events

If the EVM should run on a certain state an @ethereumjs/statemanager is needed. An @ethereumjs/blockchain instance can be passed in to provide access to external interface information like a blockhash:

// ./examples/withBlockchain.ts

import { createBlockchain } from '@ethereumjs/blockchain'
import { Common, Hardfork, Mainnet } from '@ethereumjs/common'
import { createEVM } from '@ethereumjs/evm'
import { MerkleStateManager } from '@ethereumjs/statemanager'
import { bytesToHex, hexToBytes } from '@ethereumjs/util'

import type { PrefixedHexString } from '@ethereumjs/util'

const main = async () => {
  const common = new Common({ chain: Mainnet, hardfork: Hardfork.Shanghai })
  const stateManager = new MerkleStateManager()
  const blockchain = await createBlockchain()

  const evm = await createEVM({
    common,
    stateManager,
    blockchain,
  })

  const STOP = '00'
  const ADD = '01'
  const PUSH1 = '60'

  // Note that numbers added are hex values, so '20' would be '32' as decimal e.g.
  const code = [PUSH1, '03', PUSH1, '05', ADD, STOP]

  evm.events.on('step', function (data) {
    // Note that data.stack is not immutable, i.e. it is a reference to the vm's internal stack object
    console.log(`Opcode: ${data.opcode.name}\tStack: ${data.stack}`)
  })

  const results = await evm.runCode({
    code: hexToBytes(('0x' + code.join('')) as PrefixedHexString),
    gasLimit: BigInt(0xffff),
  })

  console.log(`Returned: ${bytesToHex(results.returnValue)}`)
  console.log(`gasUsed: ${results.executionGasUsed.toString()}`)
}

void main()

Additionally this usage example shows the use of events to listen on the inner workings and procedural updates (step event) of the EVM.

Precompiles

This library support all EVM precompiles up to the Prague hardfork.

The following code allows to run precompiles in isolation, e.g. for testing purposes:

// ./examples/precompile.ts

import { Common, Hardfork, Mainnet } from '@ethereumjs/common'
import { createEVM, getActivePrecompiles } from '@ethereumjs/evm'
import { bytesToHex, hexToBytes } from '@ethereumjs/util'

const main = async () => {
  const common = new Common({ chain: Mainnet, hardfork: Hardfork.Prague })

  // Taken from test/eips/precompiles/bls/add_G1_bls.json
  const data = hexToBytes(
    '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',
  )
  const gasLimit = BigInt(5000000)

  const evm = await createEVM({ common })
  const precompile = getActivePrecompiles(common).get('000000000000000000000000000000000000000b')!

  const callData = {
    data,
    gasLimit,
    common,
    _EVM: evm,
  }
  const result = await precompile(callData)
  console.log(`Precompile result:${bytesToHex(result.returnValue)}`)
}

void main()

EIP-2537 BLS Precompiles (Prague)

Starting with v3.1.0 the EVM support the BLS precompiles introduced with EIP-2537. These precompiles run natively using the @noble/curves library (❤️ to @paulmillr!).

An alternative WASM implementation (using bls-wasm) can be optionally used like this if needed for performance reasons:

import { EVM, MCLBLS } from '@ethereumjs/evm'

const common = new Common({ chain: Chain.Mainnet, hardfork: Hardfork.Prague })
await mcl.init(mcl.BLS12_381)
const mclbls = new MCLBLS(mcl)
const evm = await EVM.create({ common, bls })

Examples

This projects contain the following examples:

./examples/decode-opcodes: Decodes a binary EVM program into its opcodes.
./examples/runCode: Show how to use this library in a browser.

All of the examples have their own README.md explaining how to run them.

Browser

With the breaking release round in Summer 2023 we have added hybrid ESM/CJS builds for all our libraries (see section below) and have eliminated many of the caveats which had previously prevented a frictionless browser usage.

It is now easily possible to run a browser build of one of the EthereumJS libraries within a modern browser using the provided ESM build. For a setup example see ./examples/browser.html.

API

Docs

For documentation on EVM instantiation, exposed API and emitted events see generated API docs.

Hybrid CJS/ESM Builds

With the breaking releases from Summer 2023 we have started to ship our libraries with both CommonJS (cjs folder) and ESM builds (esm folder), see package.json for the detailed setup.

If you use an ES6-style import in your code files from the ESM build will be used:

import { EthereumJSClass } from '@ethereumjs/[PACKAGE_NAME]'

If you use Node.js specific require, the CJS build will be used:

const { EthereumJSClass } = require('@ethereumjs/[PACKAGE_NAME]')

Using ESM will give you additional advantages over CJS beyond browser usage like static code analysis / Tree Shaking which CJS can not provide.

Buffer -> Uint8Array

With the breaking releases from Summer 2023 we have removed all Node.js specific Buffer usages from our libraries and replace these with Uint8Array representations, which are available both in Node.js and the browser (Buffer is a subclass of Uint8Array).

We have converted existing Buffer conversion methods to Uint8Array conversion methods in the @ethereumjs/util bytes module, see the respective README section for guidance.

BigInt Support

Starting with v1 the usage of BN.js for big numbers has been removed from the library and replaced with the usage of the native JS BigInt data type (introduced in ES2020).

Please note that number-related API signatures have changed along with this version update and the minimal build target has been updated to ES2020.

Architecture

VM/EVM Relation

This package contains the inner Ethereum Virtual Machine core functionality which was included in the @ethereumjs/vm package up till v5 and has been extracted along the v6 release.

This will make it easier to customize the inner EVM, which can now be passed as an optional argument to the outer VM instance.

State and Blockchain Information

For the EVM to properly work it needs access to a respective execution environment (to e.g. request on information like block hashes) as well as the connection to an outer account and contract state.

With the v2 release EVM, VM and StateManager have been substantially reworked in this regard, see PR #2649 and PR #2702 for further deepening context.

The interfaces (in a non-TypeScript sense) between these packages have been simplified and the EEI package has been completely removed. Most of the EEI related logic is now either handled internally or more generic functionality being taken over by the @ethereumjs/statemanager package.

This allows for both a standalone EVM instantiation with reasonable defaults as well as for a simplified EVM -> VM passing if a customized EVM is needed.

Setup

Hardfork Support

The EthereumJS EVM implements all hardforks from Frontier (chainstart) up to the latest active mainnet hardfork.

Currently the following hardfork rules are supported:

chainstart (a.k.a. Frontier)
homestead
tangerineWhistle
spuriousDragon
byzantium
constantinople
petersburg
istanbul
muirGlacier (only mainnet)
berlin (v5.2.0+)
london (v5.4.0+)
arrowGlacier (only mainnet) (v5.6.0+)
merge
shanghai (v2.0.0+)
cancun (v2.0.0+)

Default: shanghai (taken from Common.DEFAULT_HARDFORK)

A specific hardfork EVM ruleset can be activated by passing in the hardfork along the Common instance to the outer @ethereumjs/vm instance.

EIP Support

If you want to activate an EIP not currently active on the hardfork your common instance is set to, it is possible to individually activate EIP support in the EVM by specifying the desired EIPs using the eips property in your CommonOpts setup, e.g.:

// ./examples/eips.ts

import { Common, Mainnet } from '@ethereumjs/common'
import { createEVM } from '@ethereumjs/evm'

const main = async () => {
  const common = new Common({ chain: Mainnet, eips: [7702] })
  const evm = await createEVM({ common })
  console.log(`EIP 7702 is active - ${evm.common.isActivatedEIP(7702)}`)
}

void main()

Currently supported EIPs:

EIP-1153 - Transient storage opcodes (Cancun)
EIP-1559 - Fee market change for ETH 1.0 chain
EIP-2537 - BLS precompiles (removed in v4.0.0, see latest v3 release)
EIP-2565 - ModExp gas cost
EIP-2718 - Transaction Types
EIP-2935 - Serve historical block hashes from state (Prague)
EIP-2929 - gas cost increases for state access opcodes
EIP-2930 - Optional access list tx type
EIP-3074 - AUTH and AUTHCALL opcodes
EIP-3198 - Base fee Opcode
EIP-3529 - Reduction in refunds
EIP-3540 - EVM Object Format (EOF) v1 (outdated)
EIP-3541 - Reject new contracts starting with the 0xEF byte
EIP-3554 - Difficulty Bomb Delay to December 2021 (only PoW networks)
EIP-3607 - Reject transactions from senders with deployed code
EIP-3651 - Warm COINBASE (Shanghai)
EIP-3670 - EOF - Code Validation (outdated)
EIP-3675 - Upgrade consensus to Proof-of-Stake
EIP-3855 - Push0 opcode (Shanghai)
EIP-3860 - Limit and meter initcode (Shanghai)
EIP-4345 - Difficulty Bomb Delay to June 2022
EIP-4399 - Supplant DIFFICULTY opcode with PREVRANDAO (Merge)
EIP-4788 - Beacon block root in the EVM (Cancun)
EIP-4844 - Shard Blob Transactions (Cancun)
EIP-4895 - Beacon chain push withdrawals as operations (Shanghai)
EIP-5133 - Delaying Difficulty Bomb to mid-September 2022 (Gray Glacier)
EIP-5656 - MCOPY - Memory copying instruction (Cancun)
EIP-6110 - Supply validator deposits on chain (Prague)
EIP-6780 - SELFDESTRUCT only in same transaction (Cancun)
EIP-7002 - Execution layer triggerable withdrawals (Prague)
EIP-7251 - Execution layer triggerable validator consolidations (Prague)
EIP-7702 - EOA code transactions (Prague) (outdated)
EIP-7709 - Read BLOCKHASH from storage and update cost (Osaka)
EIP-7516 - BLOBBASEFEE opcode (Cancun)
EIP-7685 - General purpose execution layer requests (Prague)

WASM Crypto Support

This library by default uses JavaScript implementations for the basic standard crypto primitives like hashing or signature verification (for included txs). See @ethereumjs/common README for instructions on how to replace with e.g. a more performant WASM implementation by using a shared common instance.

EIP-4844 Shard Blob Transactions Support

This library supports the blob transaction type introduced with EIP-4844.

Initialization

To run EVM related EIP-4844 functionality you have to active the EIP in the associated @ethereumjs/common library:

// ./examples/4844.ts

import { Common, Hardfork, Mainnet } from '@ethereumjs/common'

const common = new Common({ chain: Mainnet, hardfork: Hardfork.Shanghai, eips: [4844] })

EIP-4844 comes with a new opcode BLOBHASH (Attention! Renamed from DATAHASH) and adds a new point evaluation precompile at address 0x0a (moved from 0x14 at some point along spec updates).

Note: Usage of the point evaluation precompile needs a manual KZG library installation and global initialization, see KZG Setup for instructions.

Tracing Events

The EVM emits events that support async listeners.

You can subscribe to the following events:

beforeMessage: Emits a Message right after running it.
afterMessage: Emits an EVMResult right after running a message.
step: Emits an InterpreterStep right before running an EVM step.
newContract: Emits a NewContractEvent right before creating a contract. This event contains the deployment code, not the deployed code, as the creation message may not return such a code.

Event listeners

You can perform asynchronous operations from within an event handler and prevent the EVM to keep running until they finish.

If subscribing to events with an async listener, specify the second parameter of your listener as a resolve function that must be called once your listener code has finished.

See below for example usage:

// ./examples/eventListener.ts#L7-L14

evm.events.on('beforeMessage', (event) => {
  console.log('synchronous listener to beforeMessage', event)
})
evm.events.on('afterMessage', (event, resolve) => {
  console.log('asynchronous listener to beforeMessage', event)
  // we need to call resolve() to avoid the event listener hanging
  resolve?.()
})

If an exception is passed to that function, or thrown from within the handler or a function called by it, the exception will bubble into the EVM and interrupt it, possibly corrupting its state. It's strongly recommended not to do that.

Understanding the EVM

If you want to understand your EVM runs we have added a hierarchically structured list of debug loggers for your convenience which can be activated in arbitrary combinations. We also use these loggers internally for development and testing. These loggers use the debug library and can be activated on the CL with DEBUG=ethjs,[Logger Selection] node [Your Script to Run].js and produce output like the following:

The following loggers are currently available:

Logger	Description
`evm:evm`	EVM control flow, CALL or CREATE message execution
`evm:gas`	EVM gas logger
`evm:precompiles`	EVM precompiles logger
`evm:journal`	EVM journal logger
`evm:ops`	Opcode traces
`evm:ops:[Lower-case opcode name]`	Traces on a specific opcode

Here are some examples for useful logger combinations.

Run one specific logger:

DEBUG=ethjs,evm tsx test.ts

Run all loggers currently available:

DEBUG=ethjs,evm:*,evm:*:* tsx test.ts

Run only the gas loggers:

DEBUG=ethjs,evm:*:gas tsx test.ts

Excluding the ops logger:

DEBUG=ethjs,evm:*,evm:*:*,-evm:ops tsx test.ts

Run some specific loggers including a logger specifically logging the SSTORE executions from the EVM (this is from the screenshot above):

DEBUG=ethjs,evm,evm:ops:sstore,evm:*:gas tsx test.ts

ethjs must be included in the DEBUG environment variables to enable any logs. Additional log selections can be added with a comma separated list (no spaces). Logs with extensions can be enabled with a colon :, and * can be used to include all extensions.

DEBUG=ethjs,evm:journal,evm:ops:* npx vitest test/runCall.spec.ts

Internal Structure

The EVM processes state changes at many levels.

runCall
- checkpoint state
- transfer value
- load code
- runCode
- materialize created contracts
- revert or commit checkpoint
runCode
- iterate over code
- run op codes
- track gas usage
OpFns
- run individual op code
- modify stack
- modify memory
- calculate fee

The opFns for CREATE, CALL, and CALLCODE call back up to runCall.

TODO: this section likely needs an update.

Profiling the EVM

Starting with the v2.1.0 release the EVM comes with build-in profiling capabilities to detect performance bottlenecks and to generally support the targeted evolution of the JavaScript EVM performance.

While the EVM now has a dedicated profiler setting to activate, the profiler can best and most useful be run through the EthereumJS client since this gives the most realistic conditions providing both real-world txs and a meaningful state size.

To repeatedly run the EVM profiler within the client sync the client on mainnet or a larger testnet to the desired block. Then the profiler should be run without sync (to not distort the results) by using the --executeBlocks and the --vmProfileBlocks (or --vmProfileTxs) flags in conjunction like:

npm run client:start -- --sync=none --vmProfileBlocks --executeBlocks=962720

This will give a profile output like the following:

The total (ms) column gives you a good overview what takes the most significant amount of time, to be put in relation with the number of calls.

The number to optimize for is the Mgas/s value. This value indicates how much gas (being a measure for the computational cost for an opcode) can be processed by the second.

A good measure to putting this relation with is by taking both the Ethereum gas limit (the max amount of "computation" per block) and the time/slot into account. With a gas limit of 30 Mio and a 12 sec slot time this leads to a following (very) minimum Mgas/s value:

30M / 12 sec = 2.5 Million gas per second

Note that this is nevertheless a very theoretical value but pretty valuable for some first rough orientation though.

Another note: profiler results for at least some opcodes are heavily distorted, first to mention the SSTORE opcode where the major "cost" occurs after block execution on checkpoint commit, which is not taken into account by the profiler.

Generally all results should rather encourage and need "self thinking" 😋 and are not suited to be blindly taken over without a deeper understanding/grasping of the underlying measurement conditions.

Happy EVM Profiling! 🎉 🤩

Development

See @ethereumjs/vm README.

EthereumJS

See our organizational documentation for an introduction to EthereumJS as well as information on current standards and best practices. If you want to join for work or carry out improvements on the libraries, please review our contribution guidelines first.

License

MPL-2.0

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

@ethereumjs/evm

Installation

Usage

Basic

Blockchain, State and Events

Precompiles

EIP-2537 BLS Precompiles (Prague)

Examples

Browser

API

Docs

Hybrid CJS/ESM Builds

Buffer -> Uint8Array

BigInt Support

Architecture

VM/EVM Relation

State and Blockchain Information

Setup

Hardfork Support

EIP Support

WASM Crypto Support

EIP-4844 Shard Blob Transactions Support

Initialization

Tracing Events

Event listeners

Understanding the EVM

Internal Structure

Profiling the EVM

Development

EthereumJS

License

Files

README.md

Latest commit

History

README.md

File metadata and controls

@ethereumjs/evm

Installation

Usage

Basic

Blockchain, State and Events

Precompiles

EIP-2537 BLS Precompiles (Prague)

Examples

Browser

API

Docs

Hybrid CJS/ESM Builds

Buffer -> Uint8Array

BigInt Support

Architecture

VM/EVM Relation

State and Blockchain Information

Setup

Hardfork Support

EIP Support

WASM Crypto Support

EIP-4844 Shard Blob Transactions Support

Initialization

Tracing Events

Event listeners

Understanding the EVM

Internal Structure

Profiling the EVM

Development

EthereumJS

License