Skip to content

Small utility to perform tcpdumps on remote machines.

License

Notifications You must be signed in to change notification settings

evanfoster/remotecap

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

19 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

remotecap

A small utility to perform tcpdump packet captures remotely and stream the results back via SSH. It supports capturing from multiple machines at once using asyncio. Additionally, it displays the capture file sizes and growth rates so you know how much data you're getting.

Installation

remotecap requires Python >= 3.7. remotecap has these hard dependencies:

To install all hard and development dependencies, run this command:

pip install 'remotecap[dev]'

I would strongly recommend that you do this in a virtualenv.

From there, you should be able to just run remotecap

Usage

usage: remotecap [-h] -w FILENAME [-f FILTER] [-k KEY] [-i INTERFACE] [-p]
                 [-s PACKET_LENGTH] [-u USER] [-r REFRESH_INTERVAL]
                 [-n KNOWN_HOSTS] [-e] [-c COMMAND_PATH] [-q] [-d]
                 hosts [hosts ...]

positional arguments:
  hosts                 Hosts to perform the capture on. Required.

optional arguments:
  -h, --help            show this help message and exit
  -w FILENAME, --filename FILENAME
                        File to write to if performing the capture on a single
                        host. Folder to put captures in if capturing from
                        multiple hosts. Required. (default: None)
  -f FILTER, --filter FILTER
                        Filter to pass to tcpdump on the remote host(s).
                        (default: not port 22)
  -k KEY, --key KEY     Location of SSH private keys to use. Can be specified
                        multiple times. (default: None)
  -i INTERFACE, --interface INTERFACE
                        Interface to perform the capture with on the remote
                        host(s). (default: any)
  -p, --password-prompt
                        Prompt for password to use for SSH. SSH keys are
                        recommended instead. (default: False)
  -s PACKET_LENGTH, --packet-length PACKET_LENGTH
                        Length of packets to capture. (default: 0)
  -u USER, --user USER  User to SSH as. The user must have sufficient rights.
                        (default: root)
  -r REFRESH_INTERVAL, --refresh-interval REFRESH_INTERVAL
                        Interval to refresh file size and growth rates at.
                        (default: 5)
  -n KNOWN_HOSTS, --known-hosts KNOWN_HOSTS
                        Known hosts file to use. Specify "None" if you want to
                        disable known hosts. (default:
                        /home/USER/.ssh/known_hosts)
  -e, --sudo            Escalate privileges (sudo) and prompt for password
                        (default: False)
  -c COMMAND_PATH, --command-path COMMAND_PATH
                        Path to tcpdump on the system. Needed if tcpdump isn't
                        in your path. (default: tcpdump)
  -q, --quiet           Do not take over the screen. (default: False)
  -d, --debugger

Reasons this exists

  1. I got really sick of sshing into a machine, running tcpdump with all of the flags needed, scping the cap file over, and then opening it in Wireshark. Packet traces are incredibly useful in many different situations, so this was bad.
  2. Quite often, I had to capture from multiple machines at once. Take the steps above and repeat 2-10 times. I know there are things like tmux or various SSH tools to make this easier, but I wanted something simple that I could share.
  3. I got tired of fixing shell scripts I wrote to attempt to resolve 1 and 2. Bash is a wonderful, terrible thing, and it didn't really meet my needs in this context.
  4. I wanted semi-live viewing of my capture files. Being able to hit c-R to get new packets is nice.
  5. I wanted to have a live display of how large my capture files were growing and the rate they were growing at.
  6. I wanted more practice using asyncio and associated libraries. I've messed with Tornado in the past, but asyncio was very different and fun to learn.

Various notes

  • If you get tracebacks complaining about key length, you may need to disable known hosts checking. cryptography is a very picky library and it's hard to do much of anything about it.

About

Small utility to perform tcpdumps on remote machines.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published