IoT-Robot-Client

The goal of this project was to create an online platform in which users can find and connect to their robots from anywhere. The user can monitor the status, sensors data, and also send live commands to their robots.

The Robot is connected to an L298 motor driver which in turn runs two DC motors. It reads a GY-80 IMU through the I2C protocol with the BMP085 temperature and pressure sensor and the ADXL345 accelerometer. The server and the robot communicate with each other using a TCP connection.

This code is written in Python 3 and has been tested on a Raspberry Pi 3B+ running Raspberry Pi OS Lite.

Deployment

Firstly, install RPi.GPIO:

sudo apt-get update
sudo apt-get install rpi.gpio

To start the client:

python3 app.py

You can define a systemd daemon to start the client everytime the Raspberry Pi boots up.

Configuration

In main.py:

Set the IP address and port of the server:

TCP_IP = 'xxx.xxx.xxx.xxx'
TCP_PORT = 7070

Assign a name and unique ID to the robot:

NAME = 'Robot X'
ID = '1as6df'

Configure the pinouts as you require (note that M1_EN and M2_EN need to support PWM):

LED_PIN = 7
BUZZER_PIN = 8
M1_IN1 = 9
M1_IN2 = 10
M1_EN = 12
M2_IN1 = 5
M2_IN2 = 6
M2_EN = 13

Authors

• @AmirParsaMahdian

License

MIT