modulemd_stream_v2.yaml

##############################################################################
# Glossary:                                                                  #
#                                                                            #
# build system: The process by which a module is built and packaged. In many #
# cases, this will be the Module Build Service tool, but this term is used   #
# as a catch-all to describe any mechanism for producing a yum repository    #
# containing modular content from input module metadata files.               #
#                                                                            #
#                                                                            #
# == Attribute Types ==                                                      #
#                                                                            #
# MANDATORY: Attributes of this type must be filled in by the packager of    #
# this module. They must also be preserved and provided in the output        #
# metadata produced by the build system for inclusion into a repository.     #
#                                                                            #
# OPTIONAL: Attributes of this type may be provided by the packager of this  #
# module, when appropriate. If they are provided, they must also be          #
# preserved and provided in the output metadata produced by the build        #
# system for inclusion into a repository.                                    #
#                                                                            #
# AUTOMATIC: Attributes of this type must be present in the repository       #
# metadata, but they may be left unspecified by the packager. In this case,  #
# the build system is responsible for generating an appropriate value for    #
# the attribute and including it in the repository metadata. If the packager #
# specifies this attribute explicitly, it must be preserved and provided in  #
# the output metadata for inclusion into a repository.                       #
#                                                                            #
# The definitions above describe the expected behavior of the build system   #
# operating in its default configuration. It is permissible for the build    #
# system to override user-provided entries through non-default operating     #
# modes. If such changes are made, all items indicated as being required for #
# the output repository must still be present.                               #
##############################################################################


# Document type identifier
# `document: modulemd` describes the contents of a module stream
document: modulemd

# Module metadata format version
version: 2

data:
    # name:
    # The name of the module
    # Filled in by the build system, using the VCS repository name as the name
    # of the module.
    #
    # Type: AUTOMATIC
    #
    # Mandatory for module metadata in a yum/dnf repository.
    name: foo

    # stream:
    # Module update stream
    # Filled in by the buildsystem, using the VCS branch name as the name of
    # the stream.
    #
    # Type: AUTOMATIC
    #
    # Mandatory for module metadata in a yum/dnf repository.
    stream: "latest"

    # version:
    # Module version, 64-bit unsigned integer
    # If this value is unset (or set to zero), it will be filled in by the
    # buildsystem, using the VCS commit timestamp.  Module version defines the
    # upgrade path for the particular update stream.
    #
    # Type: AUTOMATIC
    #
    # Mandatory for module metadata in a yum/dnf repository.
    version: 20160927144203

    # context:
    # Module context flag
    # The context flag serves to distinguish module builds with the
    # same name, stream and version and plays an important role in
    # automatic module stream name expansion.
    #
    # If 'static_context' is unset or equal to FALSE:
    #   Filled in by the buildsystem.  A short hash of the module's name,
    #   stream, version and its expanded runtime dependencies. The exact
    #   mechanism for generating the hash is unspecified.
    #
    #   Type: AUTOMATIC
    #
    #   Mandatory for module metadata in a yum/dnf repository.
    #
    # If 'static_context' is set to True:
    #   The context flag is a string of up to thirteen [a-zA-Z0-9_] characters
    #   representing a build and runtime configuration for this stream. This
    #   string is arbitrary but must be unique in this module stream.
    #
    #   Type: MANDATORY
    static_context: false
    context: c0ffee43

    # arch:
    # Module artifact architecture
    # Contains a string describing the module's artifacts' main hardware
    # architecture compatibility, distinguishing the module artifact,
    # e.g. a repository, from others with the same name, stream, version and
    # context.  This is not a generic hardware family (i.e. basearch).
    # Examples: i386, i486, armv7hl, x86_64
    # Filled in by the buildsystem during the compose stage.
    #
    # Type: AUTOMATIC
    #
    # Mandatory for module metadata in a yum/dnf repository.
    arch: x86_64

    # summary:
    # A short summary describing the module
    #
    # Type: MANDATORY
    #
    # Mandatory for module metadata in a yum/dnf repository.
    summary: An example module

    # description:
    # A verbose description of the module
    #
    # Type: MANDATORY
    #
    # Mandatory for module metadata in a yum/dnf repository.
    description: >-
        A module for the demonstration of the metadata format. Also,
        the obligatory lorem ipsum dolor sit amet goes right here.

    # servicelevels:
    # Service levels
    # This is a dictionary of important dates (and possibly supplementary data
    # in the future) that describes the end point of certain functionality,
    # such as the date when the module will transition to "security fixes only"
    # or go completely end-of-life.
    # Filled in by the buildsystem.  Service level names might have special
    # meaning to other systems.  Defined externally.
    #
    # Type: AUTOMATIC
    servicelevels:
        rawhide:
            # EOL dates are the ISO 8601 format.
            eol: 2077-10-23
        stable_api:
            eol: 2077-10-23
        bug_fixes:
            eol: 2077-10-23
        security_fixes:
            eol: 2077-10-23

    # license:
    # Module and content licenses in the Fedora license identifier
    # format
    #
    # Type: MANDATORY
    license:
        # module:
        # Module license
        # This list covers licenses used for the module metadata and
        # possibly other files involved in the creation of this specific
        # module.
        #
        # Type: MANDATORY
        module:
            - MIT

        # content:
        # Content license
        # A list of licenses used by the packages in the module.
        # This should be populated by build tools, not the module author.
        #
        # Type: AUTOMATIC
        #
        # Mandatory for module metadata in a yum/dnf repository if the
        # module contains any artifacts.
        content:
            - Apache-2.0
            - GPL-1.0-or-later OR Artistic-1.0-Perl

    # xmd:
    # Extensible metadata block
    # A dictionary of user-defined keys and values.
    # Defaults to an empty dictionary.
    #
    # Type: OPTIONAL
    xmd:
        some_key: some_data

    # dependencies:
    # Module dependencies, if any
    # A list of dictionaries describing build and runtime dependencies
    # of this module.  Each list item describes a combination of dependencies
    # this module can be built or run against.
    # Dependency keys are module names, dependency values are lists of
    # required streams.  The lists can be both inclusive (listing compatible
    # streams) or exclusive (accepting every stream except for those listed).
    # An empty list implies all active existing streams are supported.
    # Requiring multiple streams at build time will result in multiple
    # builds.  Requiring multiple streams at runtime implies the module
    # is compatible with all of them.  If the same module streams are listed
    # in both the build time and the runtime block, the build tools translate
    # the runtime block so that it matches the stream the module was built
    # against.  Multiple builds result in multiple output modulemd files.
    # See below for an example.
    # The example below illustrates how to build the same module in four
    # different ways, with varying build time and runtime dependencies.
    #
    # Type: OPTIONAL
    dependencies:
        # Build on all available platforms except for f27, f28 and epel7
        # After build, the runtime dependency will match the one used for
        # the build.
        - buildrequires:
              platform: [-f27, -f28, -epel7]
          requires:
              platform: [-f27, -f28, -epel7]

        # For platform:f27 perform two builds, one with buildtools:v1, another
        # with buildtools:v2 in the buildroot.  Both will also utilize
        # compatible:v3.  At runtime, buildtools isn't required and either
        # compatible:v3 or compatible:v4 can be installed.
        - buildrequires:
              platform: [f27]
              buildtools: [v1, v2]
              compatible: [v3]
          requires:
              platform: [f27]
              compatible: [v3, v4]

        # For platform:f28 builds, require either runtime:a or runtime:b at
        # runtime.  Only one build is performed.
        - buildrequires:
              platform: [f28]
          requires:
              platform: [f28]
              runtime: [a, b]

        # For platform:epel7, build against against all available extras
        # streams and moreextras:foo and moreextras:bar.  The number of builds
        # in this case will be 2 * <the number of extras streams available>.
        # At runtime, both extras and moreextras will match whatever stream was
        # used for build.
        - buildrequires:
              platform: [epel7]
              extras: []
              moreextras: [foo, bar]
          requires:
              platform: [epel7]
              extras: []
              moreextras: [foo, bar]

    # references:
    # References to external resources, typically upstream
    #
    # Type: OPTIONAL
    references:
        # community:
        # Upstream community website, if it exists
        #
        # Type: OPTIONAL
        community: http://www.example.com/

        # documentation:
        # Upstream documentation, if it exists
        #
        # Type: OPTIONAL
        documentation: http://www.example.com/

        # tracker:
        # Upstream bug tracker, if it exists
        #
        # Type: OPTIONAL
        tracker: http://www.example.com/

    # profiles:
    # Profiles define the end user's use cases for the module. They consist of
    # package lists of components to be installed by default if the module is
    # enabled. The keys are the profile names and contain package lists by
    # component type. There are several profiles defined below. Suggested
    # behavior for package managers is to just enable repository for selected
    # module. Then users are able to install packages on their own. If they
    # select a specific profile, the package manager should install all
    # packages of that profile.
    # Defaults to no profile definitions.
    #
    # Type: OPTIONAL
    profiles:

        # An example profile that defines a set of packages which are meant to
        # be installed inside a container image artifact.
        #
        # Type: OPTIONAL
        container:
            rpms:
                - bar
                - bar-devel

        # An example profile that delivers a minimal set of packages to
        # provide this module's basic functionality. This is meant to be used
        # on target systems where size of the distribution is a real concern.
        #
        # Type: Optional
        minimal:
            # A verbose description of the module, optional
            description: Minimal profile installing only the bar package.
            rpms:
                - bar

        # buildroot:
        # This is a special reserved profile name.
        #
        # This provides a listing of packages that will be automatically
        # installed into the buildroot of all component builds that are started
        # after a component builds with its `buildroot: True` option set.
        #
        # The primary purpose of this is for building RPMs that change
        # the build environment, such as those that provide new RPM
        # macro definitions that can be used by subsequent builds.
        #
        # Specifically, it is used to flesh out the build group in koji.
        #
        # Type: OPTIONAL
        buildroot:
            rpms:
                - bar-devel

        # srpm-buildroot:
        # This is a special reserved profile name.
        #
        # This provides a listing of packages that will be automatically
        # installed into the buildroot of all component builds that are started
        # after a component builds with its `srpm-buildroot: True` option set.
        #
        # The primary purpose of this is for building RPMs that change
        # the build environment, such as those that provide new RPM
        # macro definitions that can be used by subsequent builds.
        #
        # Very similar to the buildroot profile above, this is used by the
        # build system to specify any additional packages which should be
        # installed during the buildSRPMfromSCM step in koji.
        #
        # Type: OPTIONAL
        srpm-buildroot:
            rpms:
                - bar-extras

    # api:
    # Module API
    # Defaults to no API.
    #
    # Type: OPTIONAL
    api:
        # rpms:
        # The module's public RPM-level API.
        # A list of binary RPM names that are considered to be the
        # main and stable feature of the module; binary RPMs not listed
        # here are considered "unsupported" or "implementation details".
        # In the example here we don't list the xyz package as it's only
        # included as a dependency of xxx.  However, we list a subpackage
        # of bar, bar-extras.
        # Defaults to an empty list.
        #
        # Type: OPTIONAL
        rpms:
            - bar
            - bar-extras
            - bar-devel
            - baz
            - xxx

    # filter:
    # Module component filters
    # Defaults to no filters.
    #
    # Type: OPTIONAL
    filter:
        # rpms:
        # RPM names not to be included in the module.
        # By default, all built binary RPMs are included.  In the example
        # we exclude a subpackage of bar, bar-nonfoo from our module.
        # Defaults to an empty list.
        #
        # Type: OPTIONAL
        rpms:
            - baz-nonfoo

    # demodularized:
    # Artifacts which became non-modular
    # Defaults to no demodularization.
    # Type: OPTIONAL
    demodularized:
        # rpms:
        # A list of binary RPM package names which where removed from
        # a module. This list explains to a package mananger that the packages
        # are not part of the module anymore and up-to-now same-named masked
        # non-modular packages should become available again. This enables
        # moving a package from a module to a set of non-modular packages. The
        # exact implementation of the demodularization (e.g. whether it
        # applies to all modules or only to this stream) is defined by the
        # package manager.
        # Defaults to an empty list.
        #
        # Type: OPTIONAL
        rpms:
            - bar-old

    # buildopts:
    # Component build options
    # Additional per component type module-wide build options.
    #
    # Type: OPTIONAL
    buildopts:
        # rpms:
        # RPM-specific build options
        #
        # Type: OPTIONAL
        rpms:
            # macros:
            # Additional macros that should be defined in the
            # RPM buildroot, appended to the default set.  Care should be
            # taken so that the newlines are preserved.  Literal style
            # block is recommended, with or without the trailing newline.
            #
            # Type: OPTIONAL
            macros: |
                %demomacro 1
                %demomacro2 %{demomacro}23

            # whitelist:
            # Explicit list of package build names this module will produce.
            # By default the build system only allows components listed under
            # data.components.rpms to be built as part of this module.
            # In case the expected RPM build names do not match the component
            # names, the list can be defined here.
            # This list overrides rather then just extends the default.
            # List of package build names without versions.
            #
            # Type: OPTIONAL
            whitelist:
                - fooscl-1-bar
                - fooscl-1-baz
                - xxx
                - xyz

        # arches:
        # Instructs the build system to only build the
        # module on this specific set of architectures.
        # Includes specific hardware architectures, not families.
        # See the data.arch field for details.
        # Defaults to all available arches.
        #
        # Type: OPTIONAL
        arches: [i686, x86_64]

    # components:
    # Functional components of the module
    #
    # Type: OPTIONAL
    components:
        # rpms:
        # RPM content of the module
        # Keys are the VCS/SRPM names, values dictionaries holding
        # additional information.
        #
        # Type: OPTIONAL
        rpms:
            bar:
                # name:
                # The real name of the package, if it differs from the key in
                # this dictionary. Used when bootstrapping to build a
                # bootstrapping ref before building the package for real.
                #
                # Type: OPTIONAL
                name: bar-real

                # rationale:
                # Why is this component present.
                # A simple, free-form string.
                #
                # Type: MANDATORY
                rationale: We need this to demonstrate stuff.

                # repository:
                # Use this repository if it's different from the build
                # system configuration.
                #
                # Type: AUTOMATIC
                repository: https://pagure.io/bar.git

                # cache:
                # Use this lookaside cache if it's different from the
                # build system configuration.
                #
                # Type: AUTOMATIC
                cache: https://example.com/cache

                # ref:
                # Use this specific commit hash, branch name or tag for
                # the build.  If ref is a branch name, the branch HEAD
                # will be used.  If no ref is given, the master branch
                # is assumed.
                #
                # Type: AUTOMATIC
                ref: 26ca0c0

                # buildafter:
                # Use the "buildafter" value to specify that this component
                # must be be ordered later than some other entries in this map.
                # The values of this array come from the keys of this map and
                # not the real component name to enable bootstrapping.
                # Use of both buildafter and buildorder in the same document is
                # prohibited, as they will conflict.
                #
                # Note: The use of buildafter is not currently supported by the
                # Fedora module build system.
                #
                # Type: AUTOMATIC
                #
                # buildafter:
                #    - baz

                # buildonly:
                # Use the "buildonly" value to indicate that all artifacts
                # produced by this component are intended only for building
                # this component and should be automatically added to the
                # data.filter.rpms list after the build is complete.
                # Defaults to "false" if not specified.
                #
                # Type: AUTOMATIC
                buildonly: false

            # baz builds RPM macros for the other components to use
            baz:
                rationale: Demonstrate updating the buildroot contents.

                # buildroot:
                # If buildroot is set to True, the packages listed in this
                # module's 'buildroot' profile will be installed into the
                # buildroot of any component built in buildorder/buildafter
                # batches begun after this one, without requiring that those
                # packages are listed among BuildRequires.
                #
                # The primary purpose of this is for building RPMs that change
                # the build environment, such as those that provide new RPM
                # macro definitions that can be used by subsequent builds.
                #
                # Defaults to "false" if not specified.
                #
                # Type: OPTIONAL
                buildroot: true

                # srpm-buildroot:
                # If srpm-buildroot is set to True, the packages listed in this
                # module's 'srpm-buildroot' profile will be installed into the
                # buildroot of any component built in buildorder/buildafter
                # batches begun after this one, without requiring that those
                # packages are listed among BuildRequires.
                #
                # The primary purpose of this is for building RPMs that change
                # the build environment, such as those that provide new RPM
                # macro definitions that can be used by subsequent builds.
                #
                # Defaults to "false" if not specified.
                #
                # Type: OPTIONAL
                srpm-buildroot: true

                # See component xyz for a complete description of buildorder
                #
                # build this component before any others so that the macros it
                # creates are available to all of them.
                buildorder: -1

            xxx:
                rationale: xxx demonstrates arches and multilib.

                # arches:
                # xxx is only available on the listed architectures.
                # Includes specific hardware architectures, not families.
                # See the data.arch field for details.
                # Instructs the build system to only build the
                # component on this specific set of architectures.
                # If data.buildopts.arches is also specified,
                # this must be a subset of those architectures.
                # Defaults to all available arches.
                #
                # Type: AUTOMATIC
                arches: [i686, x86_64]

                # multilib:
                # A list of architectures with multilib
                # installs, i.e. both i686 and x86_64
                # versions will be installed on x86_64.
                # Includes specific hardware architectures, not families.
                # See the data.arch field for details.
                # Defaults to no multilib.
                #
                # Type: AUTOMATIC
                multilib: [x86_64]

            xyz:
                rationale: xyz is a bundled dependency of xxx.

                # buildorder:
                # Build order group
                # When building, components are sorted by build order tag
                # and built in batches grouped by their buildorder value.
                # Built batches are then re-tagged into the buildroot.
                # Multiple components can have the same buildorder index
                # to map them into build groups.
                # Defaults to zero.
                # Integer, from an interval [-(2^63), +2^63-1].
                # In this example, bar, baz and xxx are built first in
                # no particular order, then tagged into the buildroot,
                # then, finally, xyz is built.
                # Use of both buildafter and buildorder in the same document is
                # prohibited, as they will conflict.
                #
                # Type: OPTIONAL
                buildorder: 10

        # modules:
        # Module content of this module
        # Included modules are built in the shared buildroot, together with
        # other included content.  Keys are module names, values additional
        # component information.  Note this only includes components and their
        # properties from the referenced module and doesn't inherit any
        # additional module metadata such as the module's dependencies or
        # component buildopts.  The included components are built in their
        # defined buildorder as sub-build groups.
        #
        # Type: OPTIONAL
        modules:
            includedmodule:

                # rationale:
                # Why is this module included?
                #
                # Type: MANDATORY
                rationale: Included in the stack, just because.

                # repository:
                # Link to VCS repository that contains the modulemd file
                # if it differs from the buildsystem default configuration.
                #
                # Type: AUTOMATIC
                repository: https://pagure.io/includedmodule.git

                # ref:
                # See the rpms ref.
                #
                # Type: AUTOMATIC
                ref: somecoolbranchname

                # buildorder:
                # See the rpms buildorder.
                #
                # Type: AUTOMATIC
                buildorder: 100

    # artifacts:
    # Artifacts shipped with this module
    # This section lists binary artifacts shipped with the module, allowing
    # software management tools to handle module bundles.  This section is
    # populated by the module build system.
    #
    # Type: AUTOMATIC
    artifacts:

        # rpms:
        # RPM artifacts shipped with this module
        # A set of NEVRAs associated with this module. An epoch number in the
        # NEVRA string is mandatory.
        #
        # Type: AUTOMATIC
        rpms:
            - bar-0:1.23-1.module_deadbeef.x86_64
            - bar-devel-0:1.23-1.module_deadbeef.x86_64
            - bar-extras-0:1.23-1.module_deadbeef.x86_64
            - baz-0:42-42.module_deadbeef.x86_64
            - xxx-0:1-1.module_deadbeef.x86_64
            - xxx-0:1-1.module_deadbeef.i686
            - xyz-0:1-1.module_deadbeef.x86_64

        # rpm-map:
        # The rpm-map exists to link checksums from repomd to specific
        # artifacts produced by this module. Any item in this list must match
        # an entry in the data.artifacts.rpms section.
        #
        # Type: AUTOMATIC
        rpm-map:

          # The digest-type of this checksum.
          #
          # Type: MANDATORY
          sha256:

            # The checksum of the artifact being sought.
            #
            # Type: MANDATORY
            ee47083ed80146eb2c84e9a94d0836393912185dcda62b9d93ee0c2ea5dc795b:

              # name:
              # The RPM name.
              #
              # Type: Mandatory
              name: bar

              # epoch:
              # The RPM epoch.
              # A 32-bit unsigned integer.
              #
              # Type: OPTIONAL
              epoch: 0

              # version:
              # The RPM version.
              #
              # Type: MANDATORY
              version: 1.23

              # release:
              # The RPM release.
              #
              # Type: MANDATORY
              release: 1.module_deadbeef

              # arch:
              # The RPM architecture.
              #
              # Type: MANDATORY
              arch: x86_64

              # nevra:
              # The complete RPM NEVRA.
              #
              # Type: MANDATORY
              nevra: bar-0:1.23-1.module_deadbeef.x86_64