infrastructure/proxmox/gpu-passthrough/igpu-passthrough-to-vm/

[giscus[bot]]

infrastructure/proxmox/gpu-passthrough/igpu-passthrough-to-vm/

Proxmox iGPU passthrough to VM configuration for Hardware Acceleration (HW Aceleration) for example using video encoding/decoding and Transcoding for series like Plex and Emby.

https://3os.org/infrastructure/proxmox/gpu-passthrough/igpu-passthrough-to-vm/

[alandev84]

i tried your method on intel nuc 11, does not truly passthrough. it point that my gfx is meeting error 43. do you know how to resolve this? also, do you know how to dump vbios for the intel igpu? thanks in advance!

[fire1ce]

Unfortunately, error 43 is the most hard to debug since its a software restriction. The routes you can take are different Kernel version for example 5.13, different vm configuration as Machine type and a-lot of patience.

About the vbios of the vgpu - no idea.

[SerialVelocity]

@alandev84 Did you get anywhere with this?

[lalli87]

Worked the first time for me. I have same 8th gen intel i5 with 630 integrated GPU. Successfully passed to Ubuntu 24.04

[herotm]

I am not seeing the RenderD128, all other settings are the same. Do you know how to debug

[fire1ce]

@herotm worked?

[herotm]

yep, all Linux OS works, just not Windows, donno why, i looked thru other forum posts, no luck.

[fire1ce]

yeh gpu passthrough are pain!

[herotm]

I am not getting sound thru the HDMI port from the IGPU Passthrough

lspci only shows

00:02.0 VGA compatible controller: Intel Corporation Device 9a60 (rev 01)

I dont see Audio options, are you familiar with this

[fire1ce]

I'm not. Never used the audio nor tried to make it work.

[ironicbadger]

Could you provide some more specifics on the kernel versions (if they are special) for specific versions of Intel CPUs? The more modern CPUs like 12th gen for example, do they require anything other than mainline?

[fire1ce]

Nothing special about kernel. But proxmox has a recored to brake stuff from kernel to kernel. Have no clue about 12gen. I don't have all the hardware in the world to test this methods.

[SamBudeh]

I am newb in Proxmox and Linux. I'm getting getting the following when I try to start the VM:

swtpm_setup: Not overwriting existing state file.
kvm: -device vfio-pci,host=0000:00:02.0,id=hostpci0,bus=ich9-pcie-port-1,addr=0x0: vfio 0000:00:02.0: error getting device from group 1: Invalid argument
Verify all devices in group 1 are bound to vfio- or pci-stub and not already in use
stopping swtpm instance (pid 3747) due to QEMU startup error
TASK ERROR: start failed: QEMU exited with code 1

This is the output of update-initramfs -u -k all:

update-initramfs: Generating /boot/initrd.img-5.15.30-2-pve
Running hook script 'zz-proxmox-boot'..
Re-executing '/etc/kernel/postinst.d/zz-proxmox-boot' in new private mount namespace..
No /etc/kernel/proxmox-boot-uuids found, skipping ESP sync.

Thank you for the write-up. Any pointers are appreciated.

[xja]

I'm unable to boot the TrueNAS VM after adding iGPU, the error message is:

kvm: -device vfio-pci,host=0000:00:02.0,id=hostpci1,bus=ich9-pcie-port-2,addr=0x0: vfio 0000:00:02.0: Failed to set up TRIGGER eventfd signaling for interrupt INTX-0: VFIO_DEVICE_SET_IRQS failure: Transport endpoint is not connected
TASK ERROR: start failed: QEMU exited with code 1

Actually, when i execute lspci -nnv | grep VGA, there is no Intel related VGA info,

root@pve:~# lspci -nnv | grep VGA
08:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 41) (prog-if 00 [VGA controller])

ASPEED Graphics is onboard integrated graphics
Host:

Name	Value
CPU(s)	8 x Intel(R) Xeon(R) E-2144G CPU @ 3.60GHz (1 Socket)
Motherboard	SuperMicro X11SCH-LN4F
Kernel Version	Linux 5.15.39-4-pve #1 SMP PVE 5.15.39-4 (Mon, 08 Aug 2022 15:11:15 +0200)
PVE Manager Version	pve-manager/7.2-7/d0dd0e85

VM:

Name	Value
Memory	10.00 GiB
Processors	4 (1 sockets. 4 cores) [host.flags=+aes]
BIOS	Default (SeaBIOS)
Display	Default
Machine	q35
SCSI Controller	Virt10 SCSI
Hard Disk (scsi0)	local-zfs:vm-101-disk-0.size=32G,ssd=1
Hard Disk (scsi1)	local-zfs:vm-101-disk-1.size=512G.ssd=1
Network Device (net0)	virtio=B2:D1:BC:5D:OD:3F.bridge=vmbrO.firewall=1
PCI Device (hostpci0)	0:00:17
PCI Device (hostpci1)	0000:00:02,pcie=1

Host BIOS:

Name	Value
Intel (VMX) Virtualization Technology	Enabled
Internal Graphics	Enabled
VT-d	Enabled

Any suggestions would be greatly appreciated!

[fire1ce]

I'm not sure if Intel® UHD Graphics P630 is supported. Try looking for the cases for the specific igpu

[xja]

Thanks for your quick response, I found a reddit thread Enable Mediated Intel iGPU (GVT-g) for VM's in Proxmox (with Plex) with the same iGPU. I will try to follow his steps to see if it works.

[xja]

Now I have jellyfin in truenas on pve working by following this thread. In order for jellyfin to transcode with iGPU, Privileged Mode must be enabled.

[ricain59]

Hi,

Tips for vm linux gpu passthrough. Vm on proxmox bios UEFI + vga memory 128mb for console on proxmox for boot (if necessary) + machine i440fx + disk EFI (this configuration works for me wiht i5 10600k UHD630)

[zx900930]

Thank you, I can confirm its working on Intel 12 Gen CPU (I'm using 12400 with UHD 730).
And can get the SR-IOV working:
https://www.michaelstinkerings.org/gpu-virtualization-with-intel-12th-gen-igpu-uhd-730/

[tomshomelab]

could you share what kernal youre using for proxmox and the vm you got this working on?

[Subbeh]

Thanks for the guide. I followed all the steps but I don't see renderD128 in /dev/dri (running VM with Ubuntu Server 22.04). Is there any additional step I need to run to make this work? Am I missing a video driver? "lspci -k" doesn't show any drivers loaded for the iGPU

[mslookup]

To whom it may help: I followed this Guide to passthrough an Intel iGPU (12th gen) from Proxmox to a VM (Unraid), but Proxmox keeps complaining "No IOMMU detected".
Stumbled across the solution for my problem at https://forum.level1techs.com/t/proxmox-no-iommu-detected-please-activate-it/179947/16 - needed to append "intel_iommu=on" to the /etc/kernel/cmdline file. After a reboot, everything worked out perfectly for me.

[imthenachoman]

Is my assumption correct that once I pass iGPU to a Windows 10 VM, then the Windows 10 VM will show on the monitor connected to the computer? The GPU is passed to the VM, so the VM will output to that video port. Right?

[ganonms]

Thank you! This worked great on my first try.

[JScharloo]

For those not seeing RenderD128 or the card at all in /dev/dri/. If the card is visible in lspci -k the passtrough is successful but the drivers are not loaded. This can be the case when you are running a LTS release in conjunction with a 13th Gen Raptor Lake Intel CPU. Upgrade the kernel to 6.12 using apt install linux-image-generic-hwe-22.04, reboot and now the driver should be loaded and the iGPU visible and usable in the guest.

[ChaconC]

Thank you! I finally got iGPU passthrough and transcoding working on my VM by upgrading the kernel to 6.2

I have a Chuwi Larkbox X N100 mini PC, adding words for fellow googlers

[andromidasj]

Holy cow, you helped end my weekend-long search on getting /dev/dri showing up in the VM. I previously did all the steps for iGPU pass-through, but it looks like I needed that kernel upgrade command and a reboot, and everything works perfectly now. Thank you!

[Mpaulo]

anyone got this working on AMD ? i'm trying to passtroght a 7950x3d

[rfuger]

已经全部按照你的说明进行设置，升技B760主板 13500T es直通HDMI无输出，究竟是怎么回事？swtpm_setup: Not overwriting existing state file.这个是什么错误？看虚拟机概要好像也启动了，就是显示器没输出啊，igd_debug.log没输出，大小为0

[jefison]

同样的错误 1365u

[batfish1000]

Thank you very much for this guide. It was the only one that worked for me. There is one other step I needed - and others may also need. I am using an ASUS motherboard and in the BIOS the iGPU is disabled by default. That meant everything worked as described above except I did not see renderD128 . I went to the ASUS BIOS under Advanced Mode/System Agent Configuration and set iGPU to "enable". I restarted the Linux virtual machine and renderD128 now appeared. That meant I could add the line --device=/dev/dri:/dev/dri to my Plex Docker container and enable hardware transcoding.

[fire1ce]

You are welcomed. Enjoy!

[smithj33]

Good guides, which are very helpful, although you just threw in everything from every internet guide, but most of it is not needed anymore. Just pointing out some things you might want to update.

vfio_virqfd doesn't need to be loaded in modules anymore. It's built in to the kernel and always loaded at boot.
None of this is needed, video=simplefb:off video=vesafb:off video=efifb:off video=vesa:off disable_vga=1. It was replaced with initcall_blacklist=sysfb_ini, which actually isn't needed either.
pcie_acs_override=downstream,multifunction Never applies to an Intel iGPU as it will always be in it's own group.
No need to blacklist the i915 GPU either.
Your Linux iGPU guide shows a screenshot for i440fx (no PCIe), but the screenshot below it shows you using q35 and pcie=1.

[user6927]

I would rather say It is not helpful at all. The author does not fully understand the content copied from somewhere. But someone may spend a lot of time to follow that "guide" with no result.

[stevefxp1]

I am able to passthrough the iGPU and configure it in Plex(Linux) but do I need the Quicksync drivers installed also? If yes Quicksync is telling me there is no driver installed bc it does not find the iGPU. It finds the default adapter.