Update homeassistant/home-assistant Docker tag to v2023.8.3

[renovate]

This PR contains the following updates:

Package	Type	Update	Change
homeassistant/home-assistant	final	minor	2023.7.3 -> 2023.8.3

---

Release Notes

home-assistant/core (homeassistant/home-assistant)

v2023.8.3

Compare Source

• Fix ness alarm armed_home state appearing as disarmed/armed_away (@​nickw444 - #​94351) (ness_alarm docs)
• Correct modbus config validator: slave/swap (@​janiversen - #​97798) (modbus docs)
• Fix Opower utilities that have different ReadResolution than previously assumed (@​tronikos - #​97823) (opower docs) (dependency)
• modbus config: count and slave_count can normally not be mixed. (@​janiversen - #​97902) (modbus docs)
• Create abstraction for Generic YeeLight (@​joostlek - #​97939) (yeelight docs)
• modbus: Repair swap for slaves (@​janiversen - #​97960) (modbus docs)
• Use Local Timezone for Withings Integration (@​VidFerris - #​98137) (withings docs)
• Bump pyrainbird to 4.0.0 (@​allenporter - #​98271) (rainbird docs) (dependency)
• Bump Python-Roborock to 0.32.3 (@​Lash-L - #​98303) (roborock docs)
• Bump flux-led to 1.0.2 (@​bdraco - #​98312) (flux_led docs)
• Use default translations by removing names from tplink descriptions (@​joostlek - #​98338) (tplink docs)
• Fix tts notify config validation (@​MartinHjelmare - #​98381) (tts docs)
• Fix GoGoGate2 configuration URL when remote access is disabled (@​oyvindwe - #​98387) (gogogate2 docs)
• Handle missing keys in Honeywell (@​mkmer - #​98392) (honeywell docs)
• Bump Reolink_aio to 0.7.7 (@​starkillerOG - #​98425) (reolink docs) (dependency)
• Update rokuecp to 0.18.1 (@​ctalkington - #​98432) (roku docs)
• Update pyipp to 0.14.3 (@​ctalkington - #​98434) (ipp docs) (dependency)
• Fix inconsistent lyric temperature unit (@​lscorcia - #​98457) (lyric docs)
• Bump aiohomekit to 2.6.16 (@​bdraco - #​98490) (homekit_controller docs) (dependency)
• Bump opower to 0.0.29 (@​tronikos - #​98503) (opower docs) (dependency)
• Revert "Integration tado bump" (@​erwindouna - #​98505) (tado docs)
• Fix the availability condition for Shelly N current sensor (@​bieniu - #​98518) (shelly docs)
• Correct number of registers to read for sensors for modbus (@​janiversen - #​98534) (modbus docs)
• Pin setuptools to 68.0.0 (@​frenck - #​98582)
• Bump ESPHome recommended BLE version to 2023.8.0 (@​bdraco - #​98586) (esphome docs)
• Verisure unpack (@​niro1987 - #​98605) (verisure docs)
• Update frontend to 2023080.1 (@​bramkragten - #​98616) (frontend docs)

v2023.8.2

Compare Source

• Handle Alert exception on notification failure (@​karwosts - #​93632) (alert docs)
• Add yeelight class to fix superclass issue (@​joostlek - #​97649) (yeelight docs)
• Fix metoffice visibility range sensor device class (@​MrHarcombe - #​97763) (metoffice docs)
• Don't assume that battery_level value is always present in Tractive hw_info (@​bieniu - #​97766) (tractive docs)
• Improve counting of UniFi WLAN Clients sensor (@​Kane610 - #​97785) (unifi docs)
• Integration tado bump (@​erwindouna - #​97791) (tado docs) (dependency)
• Ensure webhooks take HA cloud into account (@​frenck - #​97801) (webhook docs)
• Bump aiohomekit to 2.6.13 (@​bdraco - #​97820) (homekit_controller docs) (dependency)
• Fix Samsung syncthru device info (@​joostlek - #​97843) (syncthru docs)
• Fallback to get_hosts_info on older Fritz!OS in AVM Fritz!Tools (@​mib1185 - #​97844) (fritz docs)
• Fix Command Line template error when data is None (@​gjohansson-ST - #​97845) (command_line docs)
• Bump Omada API version to fix #​96193 (@​MarkGodwin - #​97848) (tplink_omada docs) (dependency)
• Bump pysensibo to 1.0.33 (@​gjohansson-ST - #​97853) (sensibo docs)
• Add missing translation key to Gardena Bluetooth (@​joostlek - #​97855) (gardena_bluetooth docs)
• Bump bimmer_connected to 0.13.9, fix notify (@​rikroe - #​97860) (bmw_connected_drive docs)
• Do not fire homekit_controller events from IP polling (@​bdraco - #​97869) (homekit_controller docs)
• Avoid polling event characteristic in homekit_controller (@​bdraco - #​97877) (homekit_controller docs)
• Fix handling HomeKit events when the char is in error state (@​bdraco - #​97884) (homekit_controller docs)
• Bump python-roborock to 0.32.2 (@​Lash-L - #​97907) (roborock docs) (dependency)
• modbus: Adjust read count by slave_count (@​janiversen - #​97908) (modbus docs)
• Bump pyatv to 0.13.4 (@​bdraco - #​97932) (apple_tv docs) (dependency)
• Bump yeelight to v0.7.13 (@​alexyao2015 - #​97933) (yeelight docs)
• Android TV Remote: Fix missing key and cert when adding a device via IP address (@​tronikos - #​97953) (androidtv_remote docs)
• Fix tomorrowio integration for new users (@​lymanepp - #​97973) (tomorrowio docs)
• Bump ZHA dependency bellows to 0.35.9 (@​puddly - #​97976) (zha docs)
• Bump pyairvisual to 2023.08.1 (@​bachya - #​97999) (airvisual docs) (airvisual_pro docs) (dependency)
• Bump aiohomekit to 2.6.15 (@​bdraco - #​98005) (homekit_controller docs) (dependency)
• Add translation keys to Tuya cover (@​joostlek - #​98040) (tuya docs)
• Remove trailing . from melcloud service descriptions (@​reedy - #​98053) (melcloud docs)
• Bump AIOAladdinConnect to 0.1.57 (@​mkmer - #​98056) (aladdin_connect docs) (dependency)
• Bump pynina to 0.3.2 (@​DeerMaximum - #​98070) (nina docs) (dependency)
• Bump opower to 0.0.24 (@​tronikos - #​98091) (opower docs) (dependency)
• Improve UniFi control PoE mode (@​Kane610 - #​98119) (unifi docs) (dependency)
• Add missing translation key in Tuya (@​joostlek - #​98122) (tuya docs)
• Correct unit of rain pause (@​elupus - #​98131) (gardena_bluetooth docs)
• Make gardena closing sensor unavailable when closed (@​elupus - #​98133) (gardena_bluetooth docs)
• Bump opower to 0.0.26 (@​tronikos - #​98141) (opower docs) (dependency)
• Opower: Add gas sensors for utilities that report CCF (@​tronikos - #​98142) (opower docs)
• Get Opower accounts from the customer endpoint (@​tronikos - #​98144) (opower docs)
• Update aioairzone to v0.6.5 (@​Noltari - #​98163) (airzone docs) (dependency)
• Use explicit device name in Broadlink (@​joostlek - #​98229) (broadlink docs)
• Bump pynws 1.5.1; fix regression for precipitation probability (@​MatthewFlamm - #​98237) (nws docs) (dependency)
• Bump pymazda to 0.3.11 (@​bdr99 - #​98084) (mazda docs) (dependency)

v2023.8.1

Compare Source

• Raise PlatformNotReady on initial OwnTone connection failure (@​uvjustin - #​97257) (forked_daapd docs)
• Add overkiz battery sensor level medium (@​matthieume - #​97472) (overkiz docs)
• Fix ZHA turn_on issues with transition=0, improve tests (@​TheJulianJES - #​97539) (zha docs)
• Bump pyDuotecno to 2023.8.1 (@​Cereal2nd - #​97583) (duotecno docs) (dependency)
• Bump Cryptography to 41.0.3 for a second security fix (@​blastoise186 - #​97611) (dependency)
• Waqi State unknown if value is string (@​joostlek - #​97617) (waqi docs)
• Bump dbus-fast to 1.90.1 (@​bdraco - #​97619) (bluetooth docs) (dependency)
• Bump python-roborock to 0.31.1 (@​Lash-L - #​97632) (roborock docs) (dependency)
• Bump intents to 2023.8.2 (@​synesthesiam - #​97636) (conversation docs) (dependency)
• Add device naming to Yeelight (@​joostlek - #​97639) (yeelight docs)
• Fix typo in tplink OUI (@​bdraco - #​97644) (tplink docs)
• Revert "Add device naming to Yeelight" (@​joostlek - #​97647) (yeelight docs)
• Enable the PRESET_MODE FanEntityFeature for VeSync air purifiers (@​DuckyCrayfish - #​97657) (vesync docs)
• Fix tplink child plug state reporting (@​bdraco - #​97658) (tplink docs)
• Fix date and timestamp device class in Command Line Sensor (@​gjohansson-ST - #​97663) (command_line docs)
• Bump zeroconf to 0.72.3 (@​bdraco - #​97668) (zeroconf docs) (dependency)
• Bump pyatv to 0.13.3 (@​bdraco - #​97670) (apple_tv docs) (dependency)
• Fix color mode attribute for both official and non official Hue lights (@​marcelveldt - #​97683) (hue docs)
• Fix UniFi image platform not loading when passphrase is missing from WLAN (@​Kane610 - #​97684) (unifi docs)
• Fix Kostal_Plenticore SELECT entities using device_info correctly (@​N3rdix - #​97690) (kostal_plenticore docs)
• Fix freebox enumerate raid disks (@​cyr-ius - #​97696) (freebox docs)
• Fix allow_name_translation logic (@​amitfin - #​97701)
• Fix NWS twice_daily forecast day/night detection (@​karwosts - #​97703) (nws docs)
• Bump opower to 0.0.19 (@​tronikos - #​97706) (opower docs) (dependency)
• Fix detection of client wan-access rule in AVM Fritz!Box Tools (@​mib1185 - #​97708) (fritz docs)
• Fix unloading KNX integration without sensors (@​farmio - #​97720) (knx docs)
• Update zigpy to 0.56.3 (@​cdce8p - #​97480) (zha docs) (dependency)
• Bump zigpy to 0.56.4 (@​TheJulianJES - #​97722) (zha docs) (dependency)
• Fix keymitt_ble RuntimeWarning (@​cdce8p - #​97729) (keymitt_ble docs)
• Bump zeroconf to 0.74.0 (@​bdraco - #​97745) (zeroconf docs) (dependency)
• Avoid calling the http access logging when logging is disabled in emulated_hue (@​bdraco - #​97750) (emulated_hue docs)
• Bump opower to 0.0.20 (@​tronikos - #​97752) (opower docs) (dependency)
• Bump pyduotecno to 2023.8.3 (@​Cereal2nd - #​97759) (duotecno docs) (dependency)
• Add has entity name to Solarlog (@​joostlek - #​97764) (solarlog docs)
• Fix WAQI being zero (@​joostlek - #​97767) (waqi docs)

v2023.8.0

Compare Source

Release notes: https://www.home-assistant.io/blog/2023/08/02/release-20238/

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR has been generated by Mend Renovate. View repository job log here.