This project is using Qwik with QwikCity. QwikCity is just a extra set of tools on top of Qwik to make it easier to build a full site, including directory-based routing, layouts, and more.
Inside your project, you'll see the following directory structure:
├── public/
│ └── ...
└── src/
├── components/
│ └── ...
└── routes/
└── ...
-
src/routes: Provides the directory based routing, which can include a hierarchy oflayout.tsxlayout files, and anindex.tsxfile as the page. Additionally,order.tsfiles are endpoints. Please see the routing docs for more info. -
src/components: Recommended directory for components. -
public: Any static assets, like images, can be placed in the public directory. Please see the Vite public directory for more info.
Use the pnpm qwik add command to add additional integrations. Some examples of integrations include: Cloudflare, Netlify or Express server, and the Static Site Generator (SSG).
pnpm qwik add # or `yarn qwik add`Development mode uses Vite's development server. During development, the dev command will server-side render (SSR) the output.
npm start # or `yarn start`Note: during dev mode, Vite may request a significant number of
.jsfiles. This does not represent a Qwik production build.
The preview command will create a production build of the client modules, a production build of src/entry.preview.tsx, and run a local server. The preview server is only for convenience to locally preview a production build, and it should not be used as a production server.
pnpm preview # or `yarn preview`The production build will generate client and server modules by running both client and server build commands. Additionally, the build command will use Typescript to run a type check on the source code.
pnpm build # or `yarn build`This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.
The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:
- Install Netlify CLI globally
npm i -g netlify-cli. - Build your site with both ssr and static
pnpm build. - Start a local server with
pnpm serve. In this project,pnpm serveuses thenetlify devcommand to spin up a server that can handle Netlify's Edge Functions locally. - Visit http://localhost:8888/ to check out your site.
Netlify Edge Functions declarations can be configured to run on specific URL patterns. Each edge function declaration associates one site path pattern with one function to execute on requests that match the path. A single request can execute a chain of edge functions from a series of declarations. A single edge function can be associated with multiple paths across various declarations.
This is useful to determine if a page response should be Server-Side Rendered (SSR) or
if the response should use a static-site generated (SSG) index.html file instead.
By default, the Netlify Edge adaptor will generate a .netlify/edge-middleware/manifest.json file, which is used by the Netlify deployment to determine which paths should, and should not, use edge functions.
To override the generated manifest, you can add a declaration to the netlify.toml using the [[edge_functions]] config. For example:
[[edge_functions]]
path = "/admin"
function = "auth"You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.
Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:
netlify linkThis sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..
If you wish to deploy from the CLI rather than using Git, you can use the command:
netlify deploy --buildYou must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.
Add --prod flag to deploy to production.
This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.
The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:
- Install Netlify CLI globally
npm i -g netlify-cli. - Build your site with both ssr and static
pnpm build. - Start a local server with
pnpm serve. In this project,pnpm serveuses thenetlify devcommand to spin up a server that can handle Netlify's Edge Functions locally. - Visit http://localhost:8888/ to check out your site.
Netlify Edge Functions declarations can be configured to run on specific URL patterns. Each edge function declaration associates one site path pattern with one function to execute on requests that match the path. A single request can execute a chain of edge functions from a series of declarations. A single edge function can be associated with multiple paths across various declarations.
This is useful to determine if a page response should be Server-Side Rendered (SSR) or
if the response should use a static-site generated (SSG) index.html file instead.
By default, the Netlify Edge adaptor will generate a .netlify/edge-middleware/manifest.json file, which is used by the Netlify deployment to determine which paths should, and should not, use edge functions.
To override the generated manifest, you can add a declaration to the netlify.toml using the [[edge_functions]] config. For example:
[[edge_functions]]
path = "/admin"
function = "auth"You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.
Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:
netlify linkThis sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..
If you wish to deploy from the CLI rather than using Git, you can use the command:
netlify deploy --buildYou must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.
Add --prod flag to deploy to production.
This starter site is configured to deploy to Vercel Edge Functions, which means it will be rendered at an edge location near to your users.
The adaptor will add a new vite.config.ts within the adapters/ directory, and a new entry file will be created, such as:
└── adapters/
└── vercel-edge/
└── vite.config.ts
└── src/
└── entry.vercel-edge.tsx
Additionally, within the package.json, the build.server script will be updated with the Vercel Edge build.
To build the application for production, use the build command, this command will automatically run pnpm build.server and pnpm build.client:
pnpm buildTo deploy the application for development:
pnpm deployNotice that you might need a Vercel account in order to complete this step!
The project is ready to be deployed to Vercel. However, you will need to create a git repository and push the code to it.
You can deploy your site to Vercel either via a Git provider integration or through the Vercel CLI.
This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.
The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:
- Install Netlify CLI globally
npm i -g netlify-cli. - Build your site with both ssr and static
pnpm build. - Start a local server with
pnpm serve. In this project,pnpm serveuses thenetlify devcommand to spin up a server that can handle Netlify's Edge Functions locally. - Visit http://localhost:8888/ to check out your site.
Netlify Edge Functions declarations can be configured to run on specific URL patterns. Each edge function declaration associates one site path pattern with one function to execute on requests that match the path. A single request can execute a chain of edge functions from a series of declarations. A single edge function can be associated with multiple paths across various declarations.
This is useful to determine if a page response should be Server-Side Rendered (SSR) or
if the response should use a static-site generated (SSG) index.html file instead.
By default, the Netlify Edge adaptor will generate a .netlify/edge-middleware/manifest.json file, which is used by the Netlify deployment to determine which paths should, and should not, use edge functions.
To override the generated manifest, you can add a declaration to the netlify.toml using the [[edge_functions]] config. For example:
[[edge_functions]]
path = "/admin"
function = "auth"You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.
Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:
netlify linkThis sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..
If you wish to deploy from the CLI rather than using Git, you can use the command:
netlify deploy --buildYou must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.
Add --prod flag to deploy to production.