You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
First I would like to thank all for the hard work put forward to make the hobby great, second I understand fm is beta and wanted to share my findings.... Here goes..... Using a set of tk 8180 kenwood mobile radios, anytone 878 UV plus, Pi3b+ winters repeater hat and latest dashboard and mmdvm firmware...
Q3220e duplexer specs are
LP
-1.9dB Insertion Loss
-75dB Isolation
HP
-2.0dB Insertion Loss
-80dB Isolation
Swr is 1.3
RF output is 15 Watt
The issue is when fm=1 logs report received rf late entry causing rf drop
When fm=0 everthing works as it should
By rf drop I'm referring to dmr rf drop not fm rf drop
73
The text was updated successfully, but these errors were encountered:
I have similar problems
If I active FM, Fm run Ok
but, DMR have a drop out for a moment when rf comes in. This cause a network stops running and all transmissions is dropped into the network.
I try to change ctcss threshold but no success at all.
First I would like to thank all for the hard work put forward to make the hobby great, second I understand fm is beta and wanted to share my findings.... Here goes..... Using a set of tk 8180 kenwood mobile radios, anytone 878 UV plus, Pi3b+ winters repeater hat and latest dashboard and mmdvm firmware...
Q3220e duplexer specs are
LP
-1.9dB Insertion Loss
-75dB Isolation
HP
-2.0dB Insertion Loss
-80dB Isolation
Swr is 1.3
RF output is 15 Watt
The issue is when fm=1 logs report received rf late entry causing rf drop
When fm=0 everthing works as it should
By rf drop I'm referring to dmr rf drop not fm rf drop
73
The text was updated successfully, but these errors were encountered: