Git-managed kernels from kernel.org, with fully-automated configuration that's
better than make oldconfig:
./scripts/config --enable IKCONFIG
./scripts/config --module SENSORS_NCT6775
./scripts/config --disable AUDIT
./scripts/config --set-val SND_HDA_PREALLOC_SIZE 2048
./scripts/config --set-str UEVENT_HELPER_PATH ""
and various tips. No more blind copying of 4,000+ line .config files, no
unnecessary code, no bullshit.
This repo explains how I download, configure, and install kernels on my Gentoo Linux machines.
I claim that my methodology is better than 90% of the workflows described online, including the official Gentoo documentation. Criticism welcome :)
Advantages of my approach (summary; see below for full explanation):
- Obtaining the kernel:
- git > tarballs: faster updates and patching; built-in changelog viewer; git-bisect is possible
- access to more releases, from ancient releases to latest release candidates
- easier to get support upstream
- simplicity & transparency
- Configuration:
- Fully automated, comment- and git-friendly configuration. Better than
kernel seeds or copying
.configfiles around - Proper handling of changed default values when upgrading kernels
- No extra code/complexity --
scripts/configis part of the kernel
- Fully automated, comment- and git-friendly configuration. Better than
kernel seeds or copying
- Building and installing the kernel
- compilation is not done as root
-march=nativeis used
Disadvantages of my approach:
- ~1.5 GB extra space for
.git(fixed cost if not using shallow clones, regardless of number of kernels) - You don't get any patches from the Gentoo kernel team (e.g. aufs, grsecurity, small fixes/improvements)
I won't go over the basics of kernel configuration here -- that's already described here:
- https://wiki.gentoo.org/wiki/Handbook:X86/Installation/Kernel
- https://wiki.gentoo.org/wiki/Kernel
- https://wiki.gentoo.org/wiki/Kernel/Configuration
- https://wiki.gentoo.org/wiki/Kernel/Upgrade
There's no need to duplicate documentation, so go and at least skim through those pages if you haven't read them already.
How kernel development works: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/2.Process.rst .
TL;DR:
linux-next: integration repo; might not even compilemainline: "official" kernel, managed by Linus himselfstable: contains backported fixes
Distros such as Ubuntu and RHEL have their own forks of the kernel (e.g. here's Ubuntu's Xenial repo). They also backport fixes to certain "stable" and supported versions. It's possible to use those with Gentoo, but I fail to see the appeal of doing that.
On Gentoo you have several "official" options, with various amounts of extra patches and support available:
sys-kernel/gentoo-sources-- default, slightly patched sourcessys-kernel/vanilla-sources-- upstream kernel with no modificationssys-kernel/hardened-sources-- rest in peace- several others -- browse the sys-kernel category
If you use gentoo-sources you get:
- A bunch of required settings automatically
enabled
for you if you enable
CONFIG_GENTOO_LINUX. - Various patches. For example, you can find all the 4.12 patches here:
https://dev.gentoo.org/~mpagano/genpatches/trunk/4.12/ . For a concrete
example: without
1500_XATTR_USER_PREFIX.patchportage will spit out a lot ofFailed to set XATTR_PAX markingserrors if your/var/tmp/portageis on atmpfsmount.
The Gentoo kernel team is really good (Greg
Kroah-Hartman is a member!).
They definitely add value and are more knowledgable than I am. However, I'd
rather get my kernel from kernel.org directly with
git (yes, even though gregkh maintains linux-stable).
Why?
- I can
git pulland get the latest kernel without having to wait for the Gentoo kernel team to release an ebuild. - Obtaining support is easier. kernel.org states: "[If using a distro kernel,] Please use the support channels offered by your distribution vendor to obtain kernel support".
- Applying patches is trivial regardless of which approach you take, but I find it easier to track and cherry-pick patches with git.
- It's trivial to switch to the mainline/linux-next kernels if needed, or any other tree, without changing my workflow.
- I get access to more versions.
linux-stable+mainlinehave 2,500+ tags, whilevanilla-sourcescurrently only has 7 ebuilds. git-pullis faster thanemerge. Portage has to parse ebuilds,/var/db/pkg, etc. It also has to download a 90+ MB tarball for every new major release. I also don't have to disableFEATURES=buildpkgthroughpackage.env--git-pullis simply less annoying.
Which kernel version to use?
Open https://www.kernel.org/ . Pick a longterm release if you want to stick
with a certain major version (e.g. 4.9) for a long time, or instead use the
latest stable version.
Finally, the actual guide. I like having 1 "master" bare repo per remote tree:
george@george:/usr/src$ sudo mkdir -p linux-stable-git-bare && sudo chown "$(id -un):$(id -gn)" linux-stable-git-bare
george@george:/usr/src$ git clone --mirror --bare 'https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git' linux-stable-git-bareThen we pick 1+ versions:
george@george:/usr/src$ git -C linux-stable-git-bare fetch --all --tags
george@george:/usr/src$ git -C linux-stable-git-bare tag --sort=-creatordate # you can also consult https://www.kernel.org/
# Example with v4.12.8:
george@george:/usr/src$ v="4.12.8"Create a folder per version:
george@george:/usr/src$ sudo mkdir "linux-stable-git-$v" && sudo chown "$(id -un):$(id -gn)" "linux-stable-git-$v"
george@george:/usr/src$ git clone --single-branch --branch "v$v" linux-stable-git-bare/ "linux-stable-git-$v"
The .git folders will use hardlinks (until someone/something runs git-gc),
so it should be pretty space efficient.
Once you no longer need the Gentoo kernels:
george@george:~$ sudo mkdir -p /etc/portage/profile/
george@george:~$ echo 'sys-kernel/vanilla-sources-4.12.8' | sudo tee --append /etc/portage/profile/package.provided
george@george:~$ sudo emerge -aC gentoo-sources vanilla-sources # ...This is possibly a bad idea, because now depclean could uninstall some required packages:
george@george:~$ equery depgraph '=gentoo-sources-4.12.8'
* dependency graph for sys-kernel/gentoo-sources-4.12.8
`-- sys-kernel/gentoo-sources-4.12.8 [~amd64 keyword]
`-- sys-apps/sed-4.2.2 (sys-apps/sed) amd64
`-- sys-devel/binutils-2.28-r2 (>=sys-devel/binutils-2.11.90.0.31) amd64
`-- sys-libs/ncurses-6.0-r1 (>=sys-libs/ncurses-5.2) amd64
`-- sys-devel/make-4.2.1 (sys-devel/make) amd64
`-- dev-lang/perl-5.24.1-r2 (dev-lang/perl) amd64
`-- sys-devel/bc-1.06.95-r1 (sys-devel/bc) amd64
You should probably add those to @world.
If you want to stick to ebuilds, yet automatically configure your kernels, I suggest looking at https://github.com/jollheef/jollheef-overlay/blob/3a59396be2cbbdb1202e30ac577c3676fa5d9a85/sys-kernel/linux/linux-4.17.4.ebuild for inspiration.
Downloading, compiling, and installing the kernel is trivial: you (roughly) do
git pull && make all install. Kernel configuration is the most challenging
part of running your own kernel. Depending on how far you want to deviate from
the defaults, it can take you up to several hours to manually configure a
kernel.
We can split configuration into hardware and software.
You will likely end up with a non-fully working computer if you just use make defconfig.
It's also easy to end up with partial hardware support -- perhaps there's a hardware sensor that's available but whose support hasn't been enabled. How do you know you have enabled everything necessary?
Options for configuring hardware support:
- Easy:
- genkernel
make allmodconfig- Copy
.configfrom Ubuntu/Fedora/etc. Example: http://kernel.ubuntu.com/~kernel-ppa/configs/xenial/linux/ . - Boot a Linux live CD with the kernel version you care about. Then use
make localmodconfigand save the config. - Kernel seeds. E.g. http://www.elilabs.com/~pappy/ (untested; not recommended)
- AutoKernConf (untested; not recommended)
- Time-consuming:
- Go over
lspci/lsusband use the device/vendor numbers to find the relevant configs - Go over all options in
make menuconfigand enable whatever you think is relevant
- Go over
genkernel, allmodconfig, and localmodconfig are useful and I recommend them
if you don't want to bother figuring out what hardware support you need
enabled.
On the other hand, I think kernel seeds are an anti-pattern. Their proponents claim that "Seeds are a sane 'make defconfig' for the real world". I'd rather trust upstream with my defaults and expend energy on changing said defaults upstream if they really are suboptimal for most users of $ARCH. I think the defaults are fine and there's no need for kernel seeds.
The few advantages of a "from-scratch" config:
- 5-10x faster compilation (depending on selections). E.g.
make -j4on a quad-core Intel i7 7700K CPU @ 4.5 GHz, Linux 4.12, gcc 5.4.0, with everything on a ramdisk:allnoconfig: 55s user, 6s system, 20s walldefconfig: 472s user, 38s system, 145s walldefconfig+ minor changes: 624s user, 47s system, 190s wall- random Ubuntu config: 3950s user, 312s system, 1166s wall
- You save up to 200 MB of disk space (no unnecessary modules)
- You save a few milliseconds/seconds when booting up
- Reduced attack surface
- Tiny memory savings
- Good learning experience
I'd argue that most folks would be better off sticking with gentoo-sources + genkernel or any of the popular distro kernels.
Software like systemd requires certain kernel features to work properly.
As a Gentoo user you've probably seen messages like this one:
ERROR: setup
CONFIG_AUDITSYSCALL: is not set when it should be.
Again, make defconfig won't cut it.
The traditional approach is to generate a .config and then keep doing make oldconfig or make olddefconfig. .config files have thousands of lines.
Options that were explicitly enabled/disabled are mixed together with default
settings.
Problem 1: If defaults change (like in this famous Linus rant) then the new defaults won't come into effect -- you'll be stuck in the past.
Don't believe me?
george@george:~/linux$ git checkout 'b4b8cbf679c4866a523a35d1454884a31bd5d8dc^' # note caret
george@george:~/linux$ make mrproper defconfig
george@george:~/linux$ grep CNN55XX .config
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
george@george:~/linux$ git checkout 'b4b8cbf679c4866a523a35d1454884a31bd5d8dc'
george@george:~/linux$ make oldconfig
george@george:~/linux$ grep CNN55XX .config
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=mProblem 2: Adding comments like CONFIG_TUN is required by openvpn is hard and
as a result almost nobody documents their .config files.
Some strong opinions:
- Configuration should be fully automated. Life is short, try to automate what you can.
- Configuration should be version controlled.
- Configuration should be documented (why is option X enabled?).
Here's what I do:
emergethe packages you need (e.g. systemd, docker, openvpn)- Gather all the error/warning messages
- Use the kernel's
scripts/configscript to enable all the settings I need. Because I handle hardware configuration myself, my script looks like this:
# per-machine hardware config
"$(dirname "$0")/hardware/$(hostname).sh"
# /proc/config.gz
./scripts/config --enable IKCONFIG # tristate
./scripts/config --enable IKCONFIG_PROC # boolean
# gentoo-sources ( https://gitweb.gentoo.org/proj/linux-patches.git/tree/4567_distro-Gentoo-Kconfig.patch ):
./scripts/config --enable DEVTMPFS # boolean
./scripts/config --enable TMPFS # boolean
./scripts/config --enable UNIX # tristate
./scripts/config --enable SHMEM # boolean
# gentoo/portage:
./scripts/config --enable CGROUPS # boolean
./scripts/config --enable NAMESPACES # boolean
./scripts/config --enable IPC_NS # boolean
./scripts/config --enable NET_NS # boolean
./scripts/config --enable SYSVIPC # boolean
# openrc/runit support
./scripts/config --enable BINFMT_SCRIPT # tristate
# Recommended by the Gentoo Handbook: "Also select Maintain a devtmpfs file
# system to mount at /dev so that critical device files are already available
# early in the boot process (CONFIG_DEVTMPFS and DEVTMPFS_MOUNT)":
./scripts/config --enable DEVTMPFS # boolean
./scripts/config --enable DEVTMPFS_MOUNT # boolean
# required for CHECKPOINT_RESTORE
./scripts/config --enable EXPERT # boolean
# systemd -- gentoo ebuild:
./scripts/config --enable AUTOFS4_FS # tristate
./scripts/config --enable BLK_DEV_BSG # boolean
./scripts/config --enable CGROUPS # boolean
./scripts/config --enable CHECKPOINT_RESTORE # boolean
./scripts/config --enable CRYPTO_HMAC # tristate
./scripts/config --enable CRYPTO_SHA256 # tristate
./scripts/config --enable CRYPTO_USER_API_HASH # tristate
# ./scripts/config --enable DEVPTS_MULTIPLE_INSTANCES # removed -- https://github.com/torvalds/linux/commit/eedf265aa003
./scripts/config --enable DMIID # boolean
./scripts/config --enable EPOLL # boolean
./scripts/config --enable FANOTIFY # boolean
./scripts/config --enable FHANDLE # boolean
./scripts/config --enable INOTIFY_USER # boolean
./scripts/config --enable IPV6 # tristate
./scripts/config --enable NET # boolean
./scripts/config --enable NET_NS # boolean
./scripts/config --enable PROC_FS # boolean
./scripts/config --enable SECCOMP # boolean
./scripts/config --enable SECCOMP_FILTER # boolean
./scripts/config --enable SIGNALFD # boolean
./scripts/config --enable SYSFS # boolean
./scripts/config --enable TIMERFD # boolean
./scripts/config --enable TMPFS_POSIX_ACL # boolean
./scripts/config --enable TMPFS_XATTR # boolean
./scripts/config --enable ANON_INODES # boolean
./scripts/config --enable BLOCK # boolean
./scripts/config --enable EVENTFD # boolean
./scripts/config --enable FSNOTIFY # boolean
./scripts/config --enable INET # boolean
./scripts/config --enable NLATTR # boolean
# systemd -- extra things from https://cgit.freedesktop.org/systemd/systemd/tree/README
./scripts/config --enable DEVTMPFS # boolean
./scripts/config --disable SYSFS_DEPRECATED # boolean
./scripts/config --set-str UEVENT_HELPER_PATH ""
./scripts/config --disable FW_LOADER_USER_HELPER # boolean
./scripts/config --enable EXT4_FS_POSIX_ACL # boolean
./scripts/config --enable BTRFS_FS_POSIX_ACL # boolean
./scripts/config --enable CGROUP_SCHED # boolean
./scripts/config --enable FAIR_GROUP_SCHED # boolean
./scripts/config --enable CFS_BANDWIDTH # boolean
./scripts/config --enable SCHEDSTATS # boolean
./scripts/config --enable SCHED_DEBUG # boolean
./scripts/config --enable EFIVAR_FS # tristate
./scripts/config --enable EFI_PARTITION # boolean
# ./scripts/config --disable RT_GROUP_SCHED # boolean, docker wants this
# ./scripts/config --disable AUDIT # boolean, conflicts with consolekit
# chromium
./scripts/config --enable PID_NS # boolean
./scripts/config --enable NET_NS # boolean
./scripts/config --enable SECCOMP_FILTER # boolean
./scripts/config --enable USER_NS # boolean
./scripts/config --enable ADVISE_SYSCALLS # boolean
./scripts/config --disable COMPAT_VDSO # boolean
# qemu for kernel dev
./scripts/config --module VIRTIO_PCI # tristate
./scripts/config --module VIRTIO_BLK # tristate
./scripts/config --module VIRTIO_NET # tristate
./scripts/config --module 9P_FS # tristate
./scripts/config --module NET_9P # tristate
./scripts/config --module NET_9P_VIRTIO # tristate
# lm_sensors
./scripts/config --enable I2C_CHARDEV # tristate
# cryptsetup, luks (according to gentoo wiki page)
./scripts/config --enable BLK_DEV_DM # tristate
./scripts/config --enable DM_CRYPT # tristate
./scripts/config --enable CRYPTO_AES_X86_64 # tristate
./scripts/config --enable CRYPTO_XTS # tristate
./scripts/config --enable CRYPTO_SHA256 # tristate
./scripts/config --enable CRYPTO_USER_API_SKCIPHER # tristate
# openvpn
./scripts/config --module TUN # tristate
# cups
./scripts/config --module USB_PRINTER # tristate
# pulseaudio
./scripts/config --set-val SND_HDA_PREALLOC_SIZE 2048
# Docker (useful: contrib/check-config.sh)
# "Generally Necessary"
./scripts/config --enable NAMESPACES # boolean
./scripts/config --enable NET_NS # boolean
./scripts/config --enable PID_NS # boolean
./scripts/config --enable IPC_NS # boolean
./scripts/config --enable UTS_NS # boolean
./scripts/config --enable CGROUPS # boolean
./scripts/config --enable CGROUP_CPUACCT # boolean
./scripts/config --enable CGROUP_DEVICE # boolean
./scripts/config --enable CGROUP_FREEZER # boolean
./scripts/config --enable CGROUP_SCHED # boolean
./scripts/config --enable CPUSETS # boolean
./scripts/config --enable MEMCG # boolean
./scripts/config --enable KEYS # boolean
./scripts/config --module VETH # tristate
./scripts/config --module BRIDGE # tristate
./scripts/config --module NETFILTER_ADVANCED # boolean, implicit requirement for BRIDGE_NETFILTER
./scripts/config --module BRIDGE_NETFILTER # tristate
./scripts/config --module NF_NAT_IPV4 # tristate
./scripts/config --module IP_NF_FILTER # tristate
./scripts/config --module IP_NF_TARGET_MASQUERADE # tristate
./scripts/config --module NETFILTER_XT_MATCH_ADDRTYPE # tristate
./scripts/config --module NETFILTER_XT_MATCH_CONNTRACK # tristate
./scripts/config --module NETFILTER_XT_MATCH_IPVS # tristate
./scripts/config --module IP_NF_NAT # tristate
./scripts/config --module NF_NAT # tristate
./scripts/config --enable NF_NAT_NEEDED # boolean
./scripts/config --enable POSIX_MQUEUE # boolean
# "Optional Features"
./scripts/config --enable USER_NS # boolean
./scripts/config --enable SECCOMP # boolean
./scripts/config --enable CGROUP_PIDS # boolean
./scripts/config --enable MEMCG_SWAP # boolean
./scripts/config --enable MEMCG_SWAP_ENABLED # boolean
./scripts/config --enable LEGACY_VSYSCALL_EMULATE # boolean
./scripts/config --enable BLK_CGROUP # boolean
./scripts/config --enable BLK_DEV_THROTTLING # boolean
./scripts/config --module IOSCHED_CFQ # tristate
./scripts/config --enable CFQ_GROUP_IOSCHED # boolean
./scripts/config --enable CGROUP_PERF # boolean
./scripts/config --enable CGROUP_HUGETLB # boolean
./scripts/config --module NET_CLS_CGROUP # tristate
./scripts/config --enable CGROUP_NET_PRIO # boolean
./scripts/config --enable CFS_BANDWIDTH # boolean
./scripts/config --enable FAIR_GROUP_SCHED # boolean
./scripts/config --enable RT_GROUP_SCHED # boolean
./scripts/config --module IP_VS # tristate
./scripts/config --enable IP_VS_NFCT # boolean
./scripts/config --module IP_VS_RR # tristate
./scripts/config --enable EXT4_FS # tristate
./scripts/config --enable EXT4_FS_POSIX_ACL # boolean
./scripts/config --enable EXT4_FS_SECURITY # boolean
# "Network Drivers/overlay"
./scripts/config --module VXLAN # tristate
# "Network Drivers/overlay/Optional (for encrypted networks)":
./scripts/config --enable CRYPTO # tristate
./scripts/config --enable CRYPTO_AEAD # tristate
./scripts/config --enable CRYPTO_GCM # tristate
./scripts/config --enable CRYPTO_SEQIV # tristate
./scripts/config --enable CRYPTO_GHASH # tristate
./scripts/config --enable XFRM # boolean
./scripts/config --enable XFRM_USER # tristate
./scripts/config --enable XFRM_ALGO # tristate
./scripts/config --module INET_ESP # tristate
./scripts/config --enable INET_XFRM_MODE_TRANSPORT # tristate
# "Network Drivers/ipvlan"
./scripts/config --enable NET_L3_MASTER_DEV # boolean, required for IPVLAN
./scripts/config --module IPVLAN # tristate
# macvlan
./scripts/config --module MACVLAN # tristate
./scripts/config --module DUMMY # tristate
# "ftp,tftp client in container"
# ./scripts/config --module NF_NAT_FTP # tristate
# ./scripts/config --module NF_CONNTRACK_FTP # tristate
# ./scripts/config --module NF_NAT_TFTP # tristate
# ./scripts/config --module NF_CONNTRACK_TFTP # tristate
# "Storage Drivers"
./scripts/config --enable BTRFS_FS # tristate
./scripts/config --enable BTRFS_FS_POSIX_ACL # boolean
./scripts/config --enable BLK_DEV_DM # tristate
./scripts/config --enable DM_THIN_PROVISIONING # tristate
./scripts/config --module OVERLAY_FS # tristate
# From the gentoo ebuild
./scripts/config --enable SYSVIPC # boolean
./scripts/config --enable IP_VS_PROTO_TCP # boolean
./scripts/config --enable IP_VS_PROTO_UDP # boolean
# libvirt
./scripts/config --module MACVTAP # tristate
# sys-auth/consolekit-1.1.2
./scripts/config --enable AUDIT # boolean, required for AUDITSYSCALL
./scripts/config --enable AUDITSYSCALL # boolean
# SCSI disk support
./scripts/config --enable BLK_DEV_SD # tristate
./scripts/config --enable EXT2_FS # tristate
./scripts/config --disable EXT3_FS # tristate, "This config option is here only for backward compatibility. ext3 filesystem is now handled by the ext4 driver"
./scripts/config --enable EXT4_FS # tristate
./scripts/config --enable VFAT_FS # tristate
./scripts/config --module REISERFS_FS # tristate
./scripts/config --enable XFS_FS # tristate
./scripts/config --enable BTRFS_FS # tristate
./scripts/config --enable FUSE_FS # tristate
./scripts/config --enable ISO9660_FS # tristate
./scripts/config --enable PROC_FS # boolean
./scripts/config --enable TMPFS # boolean
# USB input devices
./scripts/config --enable HID_GENERIC # tristate
./scripts/config --enable USB_HID # tristate
./scripts/config --enable USB_SUPPORT # boolean
./scripts/config --enable USB_XHCI_HCD # tristate
./scripts/config --enable USB_EHCI_HCD # tristate
./scripts/config --enable USB_OHCI_HCD # tristate
./scripts/config --enable USB_UAS # tristate, "USB attached SCSI"
# support 32-bit executables
./scripts/config --enable IA32_EMULATION # boolean
# GPT, EFI, UEFI
./scripts/config --enable PARTITION_ADVANCED # boolean
./scripts/config --enable EFI_PARTITION # boolean
./scripts/config --enable EFI # boolean
./scripts/config --enable EFI_STUB # boolean
./scripts/config --enable EFI_MIXED # boolean
./scripts/config --enable EFI_VARS # tristate
./scripts/config --disable OSF_PARTITION # boolean, Alpha servers
./scripts/config --disable AMIGA_PARTITION # boolean
./scripts/config --disable SGI_PARTITION # boolean
./scripts/config --disable SUN_PARTITION # boolean
./scripts/config --disable KARMA_PARTITION # boolean
./scripts/config --enable MAC_PARTITION # boolean
./scripts/config --enable MAGIC_SYSRQ # boolean
# app-emulation/qemu
./scripts/config --module KVM # tristate
./scripts/config --module VHOST_NET # tristate
# https://lwn.net/Articles/680989/
# https://lwn.net/Articles/681763/
./scripts/config --enable BLK_WBT # boolean
./scripts/config --enable BLK_WBT_SQ # boolean
./scripts/config --enable BLK_WBT_MQ # boolean
# http://algo.ing.unimo.it/people/paolo/disk_sched/
./scripts/config --module IOSCHED_BFQ # tristate
# https://www.youtube.com/watch?v=y5KPryOHwk8
# https://en.wikipedia.org/wiki/Active_queue_management
# https://lwn.net/Articles/616241/
./scripts/config --enable NET_SCHED # boolean
./scripts/config --module IFB # tristate
./scripts/config --module NET_SCH_HTB # tristate
./scripts/config --module NET_SCH_CBQ # tristate
./scripts/config --module NET_SCH_HFSC # tristate
./scripts/config --module NET_SCH_FQ # tristate
./scripts/config --module NET_SCH_FQ_CODEL # tristate
./scripts/config --module NET_SCH_SFB # tristate
./scripts/config --module NET_SCH_INGRESS # tristate
./scripts/config --module NET_CLS_U32 # tristate
# https://lwn.net/Articles/758353/
./scripts/config --module NET_SCH_CAKE # tristate
./scripts/config --module NET_ACT_MIRRED # tristate
./scripts/config --module NET_SCH_PIE # tristate
# https://news.ycombinator.com/item?id=14813723
./scripts/config --module TCP_CONG_BBR # tristate
# IP ECMP
./scripts/config --enable IP_ROUTE_MULTIPATH # boolean
# source-based IP routing
./scripts/config --enable IP_MULTIPLE_TABLES # boolean
# bridging
./scripts/config --module BRIDGE # tristate
# multicast
./scripts/config --enable BRIDGE_IGMP_SNOOPING # boolean
# speed up tcpdump
./scripts/config --enable BPF_JIT # boolean
# timing packets / ptp (Precision Time Protocol)
./scripts/config --enable NETWORK_PHY_TIMESTAMPING # boolean
./scripts/config --module IP_VS # tristate
./scripts/config --module BONDING # tristate
# boot_delay=X support
./scripts/config --enable BOOT_PRINTK_DELAY # boolean
# thp, compaction
./scripts/config --enable TRANSPARENT_HUGEPAGE
./scripts/config --enable TRANSPARENT_HUGEPAGE_ALWAYS
# dev-util/bcc
./scripts/config --enable BPF_SYSCALL # boolean
./scripts/config --module NET_CLS_BPF # tristate
./scripts/config --module NET_ACT_BPF # tristate
./scripts/config --enable BPF_EVENTS # boolean
./scripts/config --enable DEBUG_INFO # boolean
./scripts/config --enable FUNCTION_TRACER # boolean
./scripts/config --enable KALLSYMS_ALL # boolean
# https://lwn.net/Articles/759781/
./scripts/config --enable PSI # bool
./scripts/config --enable PSI_DEFAULT_DISABLED # bool
# https://www.phoronix.com/scan.php?page=article&item=linux_2637_video&num=1
./scripts/config --enable SCHED_AUTOGROUP # boolean
# and so onApplying my config:
george@george:/usr/src/linux-stable-git-4.12.8$ make mrproper defconfig
george@george:/usr/src/linux-stable-git-4.12.8$ ~/kernel-config.sh
george@george:/usr/src/linux-stable-git-4.12.8$ make olddefconfig
Pitfall 1: Some configs are implicit -- they are enabled by other configs:
Symbol: TAP [=n]
Type : tristate
Defined at drivers/net/Kconfig:304
Depends on: NETDEVICES [=y] && NET_CORE [=y]
Selected by: MACVTAP [=n] && NETDEVICES [=y] && NET_CORE [=y] && MACVLAN [=n] && INET [=y] || IPVTAP [=n] && NETDEVICES [=y] && NET_CORE [=y] && IPVLAN [=n] && INET [=y]
You have to satisfy the "Selected by" expression if you want CONFIG_TAP to be
enabled. ./scripts/config --enable TAP will appear to work, but make olddefconfig will nuke it.
Pitfall 2: Some configs depend on others:
Symbol: BRIDGE_NETFILTER [=n]
Type : tristate
Prompt: Bridged IP/ARP packets filtering
Location:
-> Networking support (NET [=y])
-> Networking options
-> Network packet filtering framework (Netfilter) (NETFILTER [=y])
(1) -> Advanced netfilter configuration (NETFILTER_ADVANCED [=n])
Defined at net/Kconfig:187
Depends on: NET [=y] && BRIDGE [=n] && NETFILTER [=y] && INET [=y] && NETFILTER_ADVANCED [=n]
Similarly if e.g. NET=n, ./scripts/config --enable BRIDGE_NETFILTER will
not enable NET and you'll end up with NET=n and BRIDGE_NETFILTER=n.
Workaround for detecting broken dependencies:
george@george:/usr/src/linux-stable-git-4.12.8$ grep -Po '(?<=--enable )[^# ]+' ~/kernel-config.sh | sed 's/^CONFIG_//' | while read kconf; do if ! grep -q "^CONFIG_$kconf=y" .config; then echo "$kconf not set"; fi; done
TODO: write a script that checks everything.
Don't forget to update your microcode. E.g. for Intel CPUs:
./scripts/config --enable FIRMWARE_IN_KERNEL
./scripts/config --set-str EXTRA_FIRMWARE "$(iucode_tool -L /lib/firmware/intel-ucode | grep "$(iucode_tool -S 2>&1 | grep -Po '(?<=signature ).*$')" -B 1 | grep -Po '(?<=/lib/firmware/)intel-ucode/.*')"
./scripts/config --set-str EXTRA_FIRMWARE_DIR "/lib/firmware"make install requires sys-apps/debianutils.
george@george:/usr/src$ eselect kernel list
george@george:/usr/src$ sudo eselect kernel set "linux-stable-git-4.12.8"
george@george:/usr/src$ cd linux
george@george:/usr/src/linux$ git am -3 ~/kernel-patches/*.patch
george@george:/usr/src/linux$ nice /usr/bin/time -v make KCFLAGS="-march=native" -j "$(nproc)" olddefconfig all
root@george:/usr/src/linux# (mountpoint -q /boot || mount /boot) && make install modules_install
root@george:/usr/src/linux# emerge -avtq '@module-rebuild'
# if you need an initrd:
root@george:/usr/src/linux# dracut -a crypt -o zfs "/boot/initramfs-$(make kernelrelease).img" --kver "$(make kernelrelease)"
# optional cleanup:
root@george:/usr/src/linux# eclean-kernel --list-kernels && eclean-kernel --ask --destructive --exclude config
root@george:/usr/src/linux# grub-mkconfig -o /boot/grub/grub.cfg
# optional tools:
george@george:/usr/src/linux$ make KCFLAGS="-march=native" -j "$(nproc)" -C ./tools/power/x86/turbostat
george@george:/usr/src/linux$ make KCFLAGS="-march=native" -j "$(nproc)" -C ./tools/perf- A better
scripts/configapplication, with proper dependency management (e.g. by utilisingulfalizer/Kconfiglib).
- Korean translation by @devwhjeon