This E15 module implements a 12 channel WS2811 emulator with compatible bus timing to drive multiplex (charlieplexing) LEDs. The E15 may be cascaded with regular WS28xx chips. The number of LEDs attached is automatically detected (0-12). The LED voltage is fixed to 5V. The intended use is to drive Multiplex Signals on Model Railway layouts via the WS28xx bus.
Note: The E15 is nearly identical to the RTB_E13, but allows fixed LED voltage.
User Guides
- User Guide - DE
- User Guide - EN
The decoder has the following features,
- Protocol
- WS2811 compatible timing
- LED ports
- 0..12 LEDs (auto detecting)
- Charlieplexing (Multiplexing) output
- 256 step PWM (300Hz)
- LED voltage fixed to 5V (see also RTB_E13)
- gamma correction (optional)
- firmware update via V24 debug interface
My current PCB layout uses SMD footprints with 0.5mm pitch and 0603 parts. Reflow soldering is my recommendation, but with some experience handsoldering is also possible.
- 2-layer PCB, FR4, 1.6mm
- CPU: AVR64DA32
- BUS: WS28xx
- LED: Charlieplexing
Filename structure: { pcb }{ code }{ version }.hex
Example: E15F0001.hex
| Description | |
|---|---|
| pcb | Name of matching hardware (E15) |
| code | Type of code contained (R=rom, B=bootloader, F=flash, U=bld update, P=UPDI factory code) |
| version | Release version (####) |
The fuse settings as well as the P-code (E15Pxxxx.hex) has to be installed by using UPDI.
Details
| Fuse Setting | P-code Install |
|---|---|
 |
 |
Subsequent code updates can be done via the built-in serial debug interface.
Details
-
connect the serial cable (1Mb, 8N1, RTS/CTS)
-
press 'break' within the VT100 terminal to bump the module to console prompt
-
upload the firmware file (E15Fxxxx.hex)
-
for more details, refer to the 'User Guide'
The LED intensity values for the individual LEDs need to be transmitted over the bus, with N being the number of configured LEDs.
Byte order: {led_0} ... {led_N}
This project is intended for hobby use only and is distributed in accordance with the Apache License 2.0 agreement.