add string to prival function (#357)

CMakeLists.txt

@@ -236,6 +236,7 @@ set(STUMPLESS_SOURCES
   ${PROJECT_SOURCE_DIR}/src/target/stream.c
   ${PROJECT_SOURCE_DIR}/src/version.c
   ${PROJECT_SOURCE_DIR}/src/validate.c
+  ${PROJECT_SOURCE_DIR}/src/priority.c
 )
 
 
@@ -645,6 +646,7 @@ install(FILES
   ${PROJECT_SOURCE_DIR}/include/stumpless/severity.h
   ${PROJECT_SOURCE_DIR}/include/stumpless/target.h
   ${PROJECT_SOURCE_DIR}/include/stumpless/version.h
+  ${PROJECT_SOURCE_DIR}/include/stumpless/priority.h
   DESTINATION "include/stumpless"
 )
 
@@ -957,6 +959,10 @@ add_function_test(version
   SOURCES test/function/version.cpp
 )
 
+add_function_test(priority
+  SOURCES test/function/priority.cpp
+)
+
 add_custom_target(build-test
   DEPENDS ${STUMPLESS_FUNCTION_TESTS}
 )

include/stumpless.h

@@ -99,6 +99,7 @@
 #include <stumpless/target/function.h>
 #include <stumpless/target/stream.h>
 #include <stumpless/version.h>
+#include <stumpless/priority.h>
 
 #ifdef STUMPLESS_JOURNALD_TARGETS_SUPPORTED
 /** @example journald_example.c

include/stumpless/priority.h

@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: Apache-2.0 */
+
+/*
+ * Copyright 2022 Joel E. Anderson
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/** @file
+ * Priority value (PRIVAL) represents both the Facility and Severity values.
+ *
+ * @since release v2.2.0
+ */
+
+#ifndef __STUMPLESS_PRIORITY_H
+#  define __STUMPLESS_PRIORITY_H
+
+#  include <stumpless.h>
+
+#  ifdef __cplusplus
+extern "C" {
+#  endif
+
+/**
+ * Extract PRIVAL number (Facility and Severity) from the given string with
+ * the direct number or with two names divided with a period in the order:
+ * facility first, then severity ("<facility_descr>.<severity_descr>").
+ *
+ * **Thread Safety: MT-Safe**
+ * This function is thread safe. A mutex is used to coordinate changes to the
+ * target while it is being read.
+ *
+ * **Async Signal Safety: AS-Unsafe lock**
+ * This function is not safe to call from signal handlers due to the use of a
+ * non-reentrant lock to coordinate the read of the target.
+ *
+ * **Async Cancel Safety: AC-Unsafe lock**
+ * This function is not safe to call from threads that may be asynchronously
+ * cancelled, due to the use of a lock that could be left locked..
+ *
+ * @since release v2.2.0
+ *
+ * @param string The string to extract the prival from.
+ *
+ * @return the PRIVAL number used for the severity and facility values of
+ * the logged entry, in the event of an error it returns -1.
+ */
+STUMPLESS_PUBLIC_FUNCTION
+int
+stumpless_prival_from_string( const char *string );
+
+#  ifdef __cplusplus
+} /* extern "C" */
+#  endif
+
+#endif /* __STUMPLESS_PRIORITY_H */

src/priority.c

@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: Apache-2.0
+
+/*
+ * Copyright 2022 Joel E. Anderson
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <ctype.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <stumpless.h>
+#include "private/memory.h"
+#include "private/entry.h"
+#include "private/validate.h"
+#include "private/config.h"
+
+static void toUpperCase( char *str ) {
+  for( int i = 0; str[i]; i++) {
+    str[i] = toupper( str[i] );
+  }
+}
+
+int
+stumpless_prival_from_string( const char *string ) {
+  int prival;
+  int severity;
+  int facility;
+  char *param;
+  char *period;
+  char *sec_period;
+  size_t len;
+  size_t slen;
+  size_t pre_len;
+  const char pre_facility[] = "STUMPLESS_FACILITY_";
+  const char pre_severity[] = "STUMPLESS_SEVERITY_";
+
+  VALIDATE_ARG_NOT_NULL_INT_RETURN( string );
+
+  if( unlikely( !string[0] ) ) {
+    return -1;
+  }
+
+  slen = strlen( string );
+
+  if( isdigit( string[0] ) ) {
+    prival = atoi( string );
+    if( prival >= 0 && prival <= 191 && slen < 4 ) {
+      return prival;
+    }
+  }
+
+  // find the first period character
+  period = strchr( string, '.' );
+  if( !period )
+    return -1;
+
+  // check there is no another period character
+  sec_period = strchr( period + 1, '.' );
+  if( sec_period != NULL ) {
+    return -1;
+  }
+
+  // Calculate the facility length, up to the first period character
+  len = period - string;
+  pre_len = sizeof(pre_facility) - 1;
+  param = alloc_mem( len + 1 + pre_len );
+  if( !param ) {
+    return -1;
+  }
+  // Copy the facility substring to the param buffer
+  memcpy( param, pre_facility, pre_len );
+  memcpy( param + pre_len, string, len );
+  param[pre_len + len] = '\0';
+
+  toUpperCase(param);
+  facility = stumpless_get_facility_enum( param );
+
+  free_mem( param );
+
+  if( facility < 0 )
+    return -1;
+
+  // Calculate the severity length
+  len = slen - ++len;
+  pre_len = sizeof(pre_severity) - 1;
+
+  param = alloc_mem( len + 1 + pre_len );
+  if( !param ) {
+    return -1;
+  }
+  // Copy the severity substring to the param buffer
+  memcpy( param, pre_severity, pre_len );
+  memcpy( param + pre_len, ++period, len);
+  param[pre_len + len] = '\0';
+
+  toUpperCase(param);
+  severity = stumpless_get_severity_enum( param );
+
+  free_mem( param );
+
+  if( severity < 0 )
+    return -1;
+
+  return get_prival( facility, severity );
+}
+

src/windows/stumpless.def

@@ -223,3 +223,4 @@ EXPORTS
   stumpless_unload_entry_only                   @206
   stumpless_unload_param                        @207
   vstumpless_load_entry                         @208
+  stumpless_prival_from_string                  @209

test/function/README.md

@@ -57,3 +57,7 @@ Tests for general target functionality.
 
 ## `version.cpp`
 Tests for versioning of the library.
+
+
+## `priority.cpp`
+Tests for functions that deal with priority values (PRIVAL).

test/function/priority.cpp

@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: Apache-2.0
+
+/*
+ * Copyright 2019-2021 Joel E. Anderson
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <gtest/gtest.h>
+#include <stddef.h>
+#include <stdlib.h>
+#include <stumpless.h>
+#include "test/helper/assert.hpp"
+#include "test/helper/memory_allocation.hpp"
+
+namespace {
+
+  class PriorityTest : public::testing::Test {
+  };
+
+  TEST( GetPriorityValue, NumValidPriority ) {
+    int result;
+
+    result = stumpless_prival_from_string( "119" );
+    EXPECT_EQ( result, 119 );
+  }
+
+  TEST( GetPriorityValue, UpperValidPriority ) {
+    int result;
+
+    result = stumpless_prival_from_string( "USER.INFO" );
+    EXPECT_EQ( result, 14 );
+  }
+
+  TEST( GetPriorityValue, LowerValidPriority ) {
+    int result;
+
+    result = stumpless_prival_from_string( "user.info" );
+    EXPECT_EQ( result, 14 );
+  }
+
+  TEST( GetPriorityValue, EmptyPriority ) {
+    int result;
+
+    result = stumpless_prival_from_string( "" );
+    EXPECT_EQ( result, -1 );
+  }
+
+  TEST( GetPriorityValue, NullPriority ) {
+    int result;
+
+    result = stumpless_prival_from_string( NULL );
+    EXPECT_EQ( result, -1 );
+  }
+
+  TEST( GetPriorityValue, InvalidFacilityPriority ) {
+    int result;
+
+    result = stumpless_prival_from_string( "umer.info" );
+    EXPECT_EQ( result, -1 );
+  }
+
+  TEST( GetPriorityValue, InvalidSeverityPriority ) {
+    int result;
+
+    result = stumpless_prival_from_string( "user.imfo" );
+    EXPECT_EQ( result, -1 );
+  }
+
+  TEST( GetPriorityValue, InvalidNoPeriodPriority ) {
+    int result;
+
+    result = stumpless_prival_from_string( "userinfo" );
+    EXPECT_EQ( result, -1 );
+  }
+
+  TEST( GetPriorityValue, InvalidMorePeriodPriority ) {
+    int result;
+
+    result = stumpless_prival_from_string( "user.info." );
+    EXPECT_EQ( result, -1 );
+  }
+
+  TEST( GetPriorityValue, InvalidMemFacilityPriority ) {
+    int result;
+    void * (*set_malloc_result)(size_t);
+    set_malloc_result = stumpless_set_malloc( MALLOC_FAIL );
+    ASSERT_NOT_NULL( set_malloc_result );
+
+    result = stumpless_prival_from_string( "user.err" );
+    EXPECT_EQ( result, -1 );
+
+    set_malloc_result = stumpless_set_malloc( malloc );
+    EXPECT_TRUE( set_malloc_result == malloc );
+  }
+
+  TEST( GetPriorityValue, InvalidMemSeverityPriority ) {
+    int result;
+    void * (*set_malloc_result)(size_t);
+    const struct stumpless_error *error;
+    set_malloc_result = stumpless_set_malloc( MALLOC_FAIL_ON_SIZE( 23 ) );
+    ASSERT_NOT_NULL( set_malloc_result );
+
+    result = stumpless_prival_from_string( "syslog.err" );
+    EXPECT_EQ( result, -1 );
+
+    EXPECT_ERROR_ID_EQ( STUMPLESS_MEMORY_ALLOCATION_FAILURE );
+
+    set_malloc_result = stumpless_set_malloc( malloc );
+    EXPECT_TRUE( set_malloc_result == malloc );
+  }
+
+}

tools/check_headers/standard_library.yml

@@ -230,3 +230,5 @@
 "WSACleanup":
   - "winsock2.h"
   - "private/windows_wrapper.h"
+"isdigit": "ctype.h"
+"toupper": "ctype.h"

tools/check_headers/stumpless.yml

@@ -628,3 +628,4 @@
 "stumpless_get_target_type_string" : "stumpless/target.h"
 "STUMPLESS_FOREACH_TARGET_TYPE" : "stumpless/target.h"
 "STUMPLESS_FOREACH_SEVERITY" : "stumpless/severity.h"
+"stumpless_prival_from_string" : "stumpless/priority.h"