correcting image paths

gramaziokohler · Sep 12, 2024 · 853b1f8 · 853b1f8
1 parent 3c1ef75
commit 853b1f8
Show file tree

Hide file tree

Showing 8 changed files with 7 additions and 7 deletions.
diff --git a/docs/tutorials/grasshopper/joint_rules.rst b/docs/tutorials/grasshopper/joint_rules.rst
@@ -92,7 +92,7 @@ L-Butt
 ^^^^^^
 The L-Butt extends one beam and shortens the other beam with a planar cut, to create a clean corner joint.
 
-.. image:: ../images/gh_joint_L-Butt.png
+.. image:: ../images/gh_joint_LButt.png
     :width: 50%
 
 Inputs:
@@ -109,7 +109,7 @@ L-HalfLap
 
 The *L-Half Lap* topology is when two beams meet at their ends at an angle. An L-Half Lap joint extends the two beams while removing the upper half of the overlap of one beam and the lower half of the overlaps the other to create a clean corner joint.
 
-.. image:: ../images/gh_joint_L-HalfLap.png
+.. image:: ../images/gh_joint_LHalfLap.png
     :width: 50%
 
 Inputs:
@@ -124,7 +124,7 @@ L-Miter
 
 The L-Miter joint extends and connects the two beams with a planar cut at a bisector of the angle between them.
 
-.. image:: ../images/gh_joint_L-Miter.png
+.. image:: ../images/gh_joint_LMiter.png
     :width: 50%
 
 Inputs:
@@ -145,7 +145,7 @@ The tilted cut plane is generated by sequentially connecting the following point
 * a point at the top third of the outer vertical edge of the overlap along the upper beam.
 
 
-.. image:: ../images/gh_joint_L-FrenchRidge.png
+.. image:: ../images/gh_joint_LFrenchRidge.png
     :width: 50%
 
 |
@@ -156,7 +156,7 @@ T-Butt
 
 The T-Butt joint shortens the *cross beam* with a planar cut, to match the side of the *main beam*. The *main beam* remains unchanged.
 
-.. image:: ../images/gh_joint_T-Butt.png
+.. image:: ../images/gh_joint_TButt.png
     :width: 50%
 
 Inputs:
@@ -172,7 +172,7 @@ T-HalfLap
 A T-Half Lap joint crates an overlap between the *main beam* and the *cross beam*. The *cross beam* is extended to the opposite face of the *main beam* and cut flush with it to create a planar surface.
 It is similar to a L-Half Lap joint: the upper half of the overlap of the cross beam is removed from the main beam and the lower half of the overlap of the main beam is removed from the cross beam.
 
-.. image:: ../images/gh_joint_T-HalfLap.png
+.. image:: ../images/gh_joint_THalfLap.png
     :width: 50%
 
 Inputs:
@@ -187,7 +187,7 @@ X-HalfLap
 
 The X-Half Lap joint removes the upper half of the overlap from one beam and the lower half from the other.
 
-.. image:: ../images/gh_joint_X-HalfLap.png
+.. image:: ../images/gh_joint_XHalfLap.png
     :width: 50%
 
 Inputs:

diff --git a/docs/tutorials/images/gh_Joint_L-Butt.png → docs/tutorials/images/gh_joint_LButt.png b/docs/tutorials/images/gh_Joint_L-Butt.png → docs/tutorials/images/gh_joint_LButt.png
diff --git a/...torials/images/gh_Joint_L-FrenchRidge.png → ...utorials/images/gh_joint_LFrenchRidge.png b/...torials/images/gh_Joint_L-FrenchRidge.png → ...utorials/images/gh_joint_LFrenchRidge.png
diff --git a/docs/tutorials/images/gh_Joint_L-HalfLap.png → docs/tutorials/images/gh_joint_LHalfLap.png b/docs/tutorials/images/gh_Joint_L-HalfLap.png → docs/tutorials/images/gh_joint_LHalfLap.png
diff --git a/docs/tutorials/images/gh_Joint_L-Miter.png → docs/tutorials/images/gh_joint_LMiter.png b/docs/tutorials/images/gh_Joint_L-Miter.png → docs/tutorials/images/gh_joint_LMiter.png
diff --git a/docs/tutorials/images/gh_Joint_T-Butt.png → docs/tutorials/images/gh_joint_TButt.png b/docs/tutorials/images/gh_Joint_T-Butt.png → docs/tutorials/images/gh_joint_TButt.png
diff --git a/docs/tutorials/images/gh_Joint_T-HalfLap.png → docs/tutorials/images/gh_joint_THalfLap.png b/docs/tutorials/images/gh_Joint_T-HalfLap.png → docs/tutorials/images/gh_joint_THalfLap.png
diff --git a/docs/tutorials/images/gh_Joint_X-HalfLap.png → docs/tutorials/images/gh_joint_XHalfLap.png b/docs/tutorials/images/gh_Joint_X-HalfLap.png → docs/tutorials/images/gh_joint_XHalfLap.png