Testing Code for TTGO LoRa Series

I forked this repository as the tester for TTGO LoRa32 v1.0 board. In case another version, please verify the setting inside board_def.h.

Just the LoRa transceiver and OLED that is tested, for other parts of the module, I discard the code.

TTGO LoRa32 OLED V1.0

Boards' pins

Name	V1.0	V1.2(T-Fox)	V1.6	V2.0
OLED RST	16	N/A	N/A	N/A
OLED SDA	4	21	21	21
OLED SCL	15	22	22	22
SDCard CS	N/A	N/A	13	13
SDCard MOSI	N/A	N/A	15	15
SDCard MISO	N/A	N/A	2	2
SDCard SCLK	N/A	N/A	14	14
DS3231 SDA	N/A	21	N/A	N/A
DS3231 SCL	N/A	22	N/A	N/A
LORA MOSI	27	27	27	27
LORA MISO	19	19	19	19
LORA SCLK	5	5	5	5
LORA CS	18	18	18	18
LORA RST	14	23	23	23
LORA DIO0	26	26	26	26

First

• For the first time, change the macro definition in board_def.h according to the corresponding layout and screen, and change the version to be used to 1.

  #define LORA_V1_0_OLED  0
  #define LORA_V1_2_OLED  0
  #define LORA_V1_6_OLED  0
  #define LORA_V2_0_OLED  1
  

• Set the corresponding macro definition according to the lora frequency of the actual module

  #define LORA_PERIOD 433
  // #define LORA_PERIOD 868
  // #define LORA_PERIOD 915
  

• Sender definition LORA_SENDER is 1, 0 is receiving

Install the following dependency library files:

• arduino-LoRa
• oled-ssd1306

Other references

• TTGO LoRa32 SX1276 OLED Board: Getting Started with Arduino IDE
• Product Webpage