Skip to content
This repository has been archived by the owner on Feb 9, 2022. It is now read-only.

Latest commit

 

History

History
60 lines (46 loc) · 3.94 KB

README-EN.md

File metadata and controls

60 lines (46 loc) · 3.94 KB
Raw

Hackintosh-Asus-Prime-Z390P_i9-9900K_RX5700XT

中文｜English

System Info

Configuration

  1. Motherboard: ASUS PRIME Z390-P
  2. BIOS version: 2808
  3. CPU: Intel® Core™ i9-9900K Processor
  4. Core display: Intel® UHD Graphics 630
  5. Onboard network card: Realtek® RTL8111H Gigabit LAN Controller
  6. WiFi/Bluetooth: BCM943602CS（BT4.2）
  7. Sound Card: Realtek® ALC 887 8-Channel High Definition Audio
  8. Solid State Drive: Samsung SSD 970 EVO Plus 500GB

BIOS settings

  1. Advanced-CPU settings-Intel(VMX) Virtualization Technology -enable
  2. Advanced-North Bridge-Display Settings-preferred graphics card-Auto, initialize IGPU-enable, DVMT Pre-Allocated-1024M, RC6-auto
  3. Advanced-USB Configuration--XHCI Hand-off -enable
  4. Advanced-Built-in Device-Serial Port Configuration-Serial Port -off
  5. Start-start settings-quick start-disable, if there is an error, wait for the F1 key-disable
  6. Setting mode-advanced mode

Applicable operating system version: macOS Catalina 10.15.1～11.3 beta7

  1. OpenCore version: 0.6.8
  2. Clover version: Clover version is no longer available
  3. CPU frequency conversion: Working.
  4. UHD630: Working.

Graphics Card

  1. 3.5mm sound & DP & HDMI: HDMI needs to be hot-on/off once in a dual-screen environment to display normally, using AppleALC driver.
  2. USB: Working.
  3. Wired network card: Working, RealtekRTL8111.kext is used.
  4. Wake up from sleep: Working.

Power Saver

  1. Turn off and turn on: Working.
  2. iCloud & App Store & iMessage & FaceTime: Please generate the Board Serial Number, serial number, and SmUUID by yourself, and modify the "Custom UUID" in the SysPrameter system parameters, and the MLB and ROM in the RtVariables variable settings accordingly.
  3. AirDrop & HandOff & Continuity: Working.

Wi-Fi en0 BlueTooth Apple Watch

Tips:

  1. The model needs to be set to iMAC19.1 (now preset, please modify it after installation).
  2. The config defaults to no verbose mode. To enable verbose mode, config.plist needs to modify the following one: NVRAM-Add-7C436110-AB2A-4BBB-A880-FE41995C9F82-boot-args, add -v.
  3. The ScanPolicy value of the config boot disk policy is set to 0. Bootable Windows or Other OS (Linux, Unix) If you need to specify the search partition type, please refer to the OC configuration manual.
  4. The config defaults to not display the OC Picker menu. To turn on the menu display, set as follows: Misc-Boot-ShowPicker is true (YES in the plist editor).
  5. usbport.kext is customized for me according to the motherboard wiring. If you have a USB-related error, you can customize the usbport yourself, or unload the kext, and change the XhciPortLimit value to true.

Currently known issues:

  1. Windows cannot be set as the startup disk in the startup disk (it prompts that the Bless tool cannot set this disk as the startup disk). Update-the problem has been resolved,you can view Windows Bootcamp.pdf
  2. The boot conversion assistant is unavailable (it should be a problem with multiple hard drives, the function can be used normally according to the single hard drive). Update-This issue has been resolved, you can view Windows Bootcamp.pdf

Boot Camp