These are the scripts and additional files required to build the GNU MCU Eclipse RISC-V Embedded GCC.
The build scripts use the xPack Build Box (XBB), a set of elaborate build environments based on GCC 7.2 (Docker containers for GNU/Linux and Windows or a custom HomeBrew for MacOS).
The prerequisites are common to all binary builds. Please follow the instructions in the separate Prerequisites for building binaries page and return when ready.
The build script is available from GitHub and can be viewed online.
To download it, clone the gnu-mcu-eclipse/riscv-none-gcc-build Git repo, including submodules.
$ curl -L https://github.com/gnu-mcu-eclipse/riscv-none-gcc-build/raw/master/scripts/git-clone.sh | bashwhich issues the following two commands:
$ rm -rf ~/Downloads/riscv-none-gcc-build.git
$ git clone --recurse-submodules https://github.com/gnu-mcu-eclipse/riscv-none-gcc-build.git \
~/Downloads/riscv-none-gcc-build.gitThe script creates a temporary build Work/riscv-none-gcc-${version} folder
in the user home. Although not recommended, if for any reasons you need to
change this, you can redefine WORK_FOLDER_PATH variable before invoking
the script.
Docker does not require to explicitly download new images, but does this automatically at first use.
However, since the images used for this build are relatively large, it is recommended to load them explicitly before starting the build:
$ bash ~/Downloads/riscv-none-gcc-build.git/scripts/build.sh preload-imagesThe result should look similar to:
$ docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
ilegeul/centos32 6-xbb-v1 f695dd6cb46e 2 weeks ago 2.92GB
ilegeul/centos 6-xbb-v1 294dd5ee82f3 2 weeks ago 3.09GB
hello-world latest f2a91732366c 2 months ago 1.85kBStarting with 8.2.0-2, the GNU MCU Eclipse RISC-V GCC follows the official SiFive releases, with as little differences as possible. Previously it followed the generic RISC-V releases.
The first step is to checkout the remote branches into local branches.
Currently, the following branches are used
sifive-binutils-2.32sifive-gcc-8.2.0sifive-newlib-3.0.0
For GDB, use the original FSF repo.
The second step is to create GNU MCU Eclipse branches;
they have similar names, but suffixed with -gme.
For the FSF GDB; identify the commit ID and first create a sifive-gdb-*
branch, then create the -gme branch.
In order to support the riscv-none-embed names, cherry pick or edit
the config files.
In all repos, push the new branches.
To prepare a new release, first determine the GCC version (like 7.2.0)
and update the scripts/VERSION file. The format is 7.2.0-3. The
fourth digit is the GNU MCU Eclipse release number of this version.
Add a new set of definitions in the scripts/container-build.sh, with the
versions of various components.
By default, the build script uses tagged commits and downloads the corresponding archives.
While preparing the release it is important to be able to use live Git versions. For this,
- update the commit ids to the desired ones
- commit and push
- start the build script and pass
--use-gits
$ bash ~/Downloads/riscv-none-gcc-build.git/scripts/build.sh --use-gitsWhen the result is acceptable, commit all repos and tag all with the same tag (like v7.2.0-1):
- the gnu-mcu-eclipse/riscv-gcc project
- the gnu-mcu-eclipse/riscv-binutils-gdb project
- the gnu-mcu-eclipse/riscv-newlib project
In the binutils-gdb repo, add a separate tag for the GDB branch (v7.2.0-1-gdb).
Check riscv-none-gcc-build.git/CHANGELOG.txt and add the new release.
Copy from the previous version and update.
Although it is perfectly possible to build all binaries in a single step on a macOS system, due to Docker specifics, it is faster to build the GNU/Linux and Windows binaries on a GNU/Linux system and the macOS binary separately.
The current platform for GNU/Linux and Windows production builds is an Ubuntu 17.10 VirtualBox image running on a macMini with 16 GB of RAM and a fast SSD.
Before starting a multi-platform build, check if Docker is started:
$ docker infoTo build both the 32/64-bit Windows and GNU/Linux versions, use --all;
to build selectively, use --linux64 --win64 or --linux32 --win32
(GNU/Linux can be built alone; Windows also requires the GNU/Linux build).
$ sudo rm -rf "${HOME}/Work"/riscv-none-gcc-*
$ bash ~/Downloads/riscv-none-gcc-build.git/scripts/build.sh --allSeveral hours later, the output of the build script is a set of 4 files
and their SHA signatures, created in the deploy folder:
$ ls -l deploy
total 495652
-rw-r--r-- 1 ilg ilg 126668466 May 7 13:51 gnu-mcu-eclipse-riscv-none-gcc-7.2.0-3-20180506-1300-centos32.tgz
-rw-r--r-- 1 ilg ilg 132 May 7 13:51 gnu-mcu-eclipse-riscv-none-gcc-7.2.0-3-20180506-1300-centos32.tgz.sha
-rw-r--r-- 1 ilg ilg 123374305 May 7 11:26 gnu-mcu-eclipse-riscv-none-gcc-7.2.0-3-20180506-1300-centos64.tgz
-rw-r--r-- 1 ilg ilg 132 May 7 11:26 gnu-mcu-eclipse-riscv-none-gcc-7.2.0-3-20180506-1300-centos64.tgz.sha
-rw-r--r-- 1 ilg ilg 123243494 May 7 14:27 gnu-mcu-eclipse-riscv-none-gcc-7.2.0-3-20180506-1300-win32.zip
-rw-r--r-- 1 ilg ilg 129 May 7 14:27 gnu-mcu-eclipse-riscv-none-gcc-7.2.0-3-20180506-1300-win32.zip.sha
-rw-r--r-- 1 ilg ilg 134171799 May 7 12:04 gnu-mcu-eclipse-riscv-none-gcc-7.2.0-3-20180506-1300-win64.zip
-rw-r--r-- 1 ilg ilg 129 May 7 12:04 gnu-mcu-eclipse-riscv-none-gcc-7.2.0-3-20180506-1300-win64.zip.shaTo copy the files from the build machine to the current development machine,
open the deploy folder in a terminal and use scp:
$ cd "${HOME}/Work/riscv-none-gcc-7.2.0-3/deploy"
$ scp * ilg@ilg-mbp.local:Downloads/gme-binaries/riscvThe current platform for macOS production builds is a macOS 10.10.5 VirtualBox image running on the same macMini with 16 GB of RAM and a fast SSD.
To build the latest macOS version, with the same timestamp as the previous build:
$ sudo rm -rf "${HOME}/Work"/riscv-none-gcc-*
$ caffeinate bash ~/Downloads/riscv-none-gcc-build.git/scripts/build.sh --osx --date YYYYMMDD-HHMMFor consistency reasons, the date should be the same as the GNU/Linux and Windows builds.
Several hours later, the output of the build script is a compressed
archive and its SHA signature, created in the deploy folder:
$ ls -l deploy
total 238824
-rw-r--r-- 1 ilg staff 122271403 May 7 01:36 gnu-mcu-eclipse-riscv-none-gcc-7.2.0-3-20180506-1300-macos.tgz
-rw-r--r-- 1 ilg staff 129 May 7 01:36 gnu-mcu-eclipse-riscv-none-gcc-7.2.0-3-20180506-1300-macos.tgz.shaTo copy the files from the build machine to the current development
machine, open the deploy folder in a terminal and use scp:
$ cd "${HOME}/Work/riscv-none-gcc-7.2.0-3/deploy"
$ scp * ilg@ilg-mbp.local:Downloads/gme-binaries/riscvInstead of --all, you can use any combination of:
--win32 --win64 --linux32 --linux64
Please note that, due to the specifics of the GCC build process,
the Windows build requires the corresponding GNU/Linux build, so --win32
alone is equivalent to --linux32 --win32 and --win64 alone is
equivalent to --linux64 --win64.
To remove most build files, use:
$ bash ~/Downloads/riscv-none-gcc-build.git/scripts/build.sh cleanTo also remove the repository and the output files, use:
$ bash ~/Downloads/riscv-none-gcc-build.git/scripts/build.sh cleanallFor production builds it is recommended to completely remove the build folder.
For performance reasons, the actual build folders are internal to each Docker run, and are not persistent. This gives the best speed, but has the disadvantage that interrupted builds cannot be resumed.
For development builds, it is possible to define the build folders in the host file system, and resume an interrupted build.
For development builds, it is also possible to create everything with
-g -O0 and be able to run debug sessions.
The Docker scripts run with root privileges. This is generally not a problem, since at the end of the script the output files are reassigned to the actual user.
However, for an interrupted build, this step is skipped, and files in
the install folder will remain owned by root. Thus, before removing
the build folder, it might be necessary to run a recursive chown.
The procedure to install GNU MCU Eclipse RISC-V Embedded GCC is platform specific, but relatively straight forward (a .zip archive on Windows, a compressed tar archive on macOS and GNU/Linux).
A portable method is to use xpm:
$ xpm install --global @gnu-mcu-eclipse/riscv-none-gccMore details are available on the How to install the RISC-V toolchain? page.
After install, the package should create a structure like this (only the first two depth levels are shown):
$ tree -L 2 /Users/ilg/Library/xPacks/\@gnu-mcu-eclipse/riscv-none-gcc/8.2.0-2.1/.content/
/Users/ilg/Library/xPacks/@gnu-mcu-eclipse/riscv-none-gcc/8.2.0-2.1/.content/
├── README.md
├── bin
│ ├── libexpat.1.6.7.dylib
│ ├── libexpat.1.dylib -> libexpat.1.6.7.dylib
│ ├── libgcc_s.1.dylib
│ ├── libgmp.10.dylib
│ ├── libiconv.2.dylib
│ ├── liblzma.5.dylib
│ ├── libmpfr.4.dylib
│ ├── libz.1.2.8.dylib
│ ├── libz.1.dylib -> libz.1.2.8.dylib
│ ├── riscv-none-embed-addr2line
│ ├── riscv-none-embed-ar
│ ├── riscv-none-embed-as
│ ├── riscv-none-embed-c++
│ ├── riscv-none-embed-c++filt
│ ├── riscv-none-embed-cpp
│ ├── riscv-none-embed-elfedit
│ ├── riscv-none-embed-g++
│ ├── riscv-none-embed-gcc
│ ├── riscv-none-embed-gcc-8.2.0
│ ├── riscv-none-embed-gcc-ar
│ ├── riscv-none-embed-gcc-nm
│ ├── riscv-none-embed-gcc-ranlib
│ ├── riscv-none-embed-gcov
│ ├── riscv-none-embed-gcov-dump
│ ├── riscv-none-embed-gcov-tool
│ ├── riscv-none-embed-gdb
│ ├── riscv-none-embed-gdb-
│ ├── riscv-none-embed-gdb-add-index
│ ├── riscv-none-embed-gdb-add-index-py
│ ├── riscv-none-embed-gdb-py
│ ├── riscv-none-embed-gprof
│ ├── riscv-none-embed-ld
│ ├── riscv-none-embed-ld.bfd
│ ├── riscv-none-embed-nm
│ ├── riscv-none-embed-objcopy
│ ├── riscv-none-embed-objdump
│ ├── riscv-none-embed-ranlib
│ ├── riscv-none-embed-readelf
│ ├── riscv-none-embed-size
│ ├── riscv-none-embed-strings
│ └── riscv-none-embed-strip
├── gnu-mcu-eclipse
│ ├── CHANGELOG.txt
│ ├── licenses
│ ├── patches
│ └── scripts
├── include
│ └── gdb
├── lib
│ ├── bfd-plugins
│ ├── gcc
│ ├── libcc1.0.so
│ └── libcc1.so -> libcc1.0.so
├── libexec
│ └── gcc
├── riscv-none-embed
│ ├── bin
│ ├── include
│ ├── lib
│ └── share
└── share
├── doc
└── gcc-riscv-none-embed
20 directories, 45 filesNo other files are installed in any system folders or other locations.
The binaries are distributed as portable archives; thus they do not need to run a setup and do not require an uninstall.
A simple test is performed by the script at the end, by launching the executable to check if all shared/dynamic libraries are correctly used.
For a true test you need to first install the package and then run the program from the final location. For example on macOS the output should look like:
$ /Users/ilg/Library/xPacks/@gnu-mcu-eclipse/riscv-none-gcc/8.2.0-2.1.1/.content/bin/riscv-none-embed-gcc --version
riscv-none-embed-gcc (GNU MCU Eclipse RISC-V Embedded GCC, 64-bit) 8.2.0For issues related to the procedure used to build the GNU MCU Eclipse RISC-V Embedded GCC binaries, please report them via gnu-mcu-eclipse/riscv-none-gcc-build GitHub Issues.
For issues related to the xPack used to install the binaries, please report them via gnu-mcu-eclipse/riscv-none-gcc-xpack GitHub issues.
For issues related to the toolchain functionality (compiler, newlib gdb, etc) please report them via their original RISC-V projects:
The build process is split into several scripts. The build starts on
the host, with build.sh, which runs container-build.sh several times,
once for each target, in one of the two docker containers. Both scripts
include several other helper scripts. The entire process is quite complex,
and an attempt to explain its functionality in a few words would not be
realistic. Thus, the authoritative source of details remains the source code.
See the PUBLISH.md in the gnu-mcu-eclipse/riscv-next branch.