Skip to content

ezmlm make.1

Manvendra Bhangui edited this page Dec 31, 2023 · 2 revisions

NAME

ezmlm-make - create a new mailing list

SYNOPSIS

ezmlm-make [ -+ ][ -a..zABD..Z ][ -C03..9 arg ] dir [ dot local host [digestcode] ]

DESCRIPTION

ezmlm-make sets up a new mailing list, local*@*host, along with several extra addresses to handle administrative requests.

All mailing list information is stored in a new directory, dir. dir must be an absolute pathname, starting with a slash. dot must be an absolute file name starting with a slash. Arguments other than dir may be omitted when editing an existing list, using the -e or -+ options (see below).

ezmlm-make is controlled by a template, .ezmlmrc. Described here is the behavior with the default template file. ezmlm-make will print a warning message before continuing, if the ezmlmrc version does not match the ezmlm-make version.

ezmlm-make also creates dir*/config***, where it stores all configuration information. By reading this file, you can rapidly get information about how the list is set up. ezmlm-make when used with the -e switch will read information from this file. Thus, when using ezmlm-make -e, you only need to specify the desired switches and switch arguments and dir. With the -+ switch all switches become sticky, i.e. the default for all switches (and command line arguments) becomes the switches and arguments active for the list to be edited. Note that the choice of config file also is sticky, except when running ezmlm-make as root.

ezmlm-make sets up four .qmail files: dot, dot*-owner***, dot*-return-default***, and dot*-default***. You should make sure that messages to local*@host, local-owner@*host, etc. are controlled by these .qmail files.

For message moderated lists, ezmlm-make sets up two additional .qmail files: dot*-accept-default*** and dot*-reject-default***.

For digested lists, ezmlm-make sets up another two .qmail file: dot*-digest-return-default*** and dot*-digest-owner***.

If digestcode is specified, digest creation by ezmlm-get(1) via trigger messages to the local*/@host-dig.*digestcode address is enabled.

By default, ezmlm-make sets up lists to add a ``X-No-Archive: yes'' header to outgoing messages. Public archiving servers will interpret this header as a request not to archive messages from the list. It this in not what you desire, remove this header from ezmlmrc for global effects, or from dir*/headeradd*** for the specific list.

Typical use of ezmlm-make by a normal user:

   ezmlm-make ~joe/SOS ~joe/.qmail-sos joe-sos isp.net

Typical use of ezmlm-make by alias:

   ezmlm-make ~alias/SOS ~alias/.qmail-sos sos isp.net

   chown -R alias ~alias/SOS 

Typical use of ezmlm-make by a normal user enabling automatic digests:

   ezmlm-make -d ~joe/SOS ~joe/.qmail-sos joe-sos isp.net

Typical use of ezmlm-make to change an existing list in ~joe/SOS to a message moderated list with remote administration, and enabling the remote administrator(s) to retrieve a subscriber list and to edit dir*/text*** files (digest are still enabled):

   ezmlm-make -emrldn ~joe/SOS

Mail can arrive at any time! For safe editing, turn on the sticky bit of the home directory before editing the list setup, then turn it off again (see dot-qmail(5)).

Moderator addresses are added with

  ezmlm-sub ~joe/SOS mod mod1@host1 mod2@host2 ...

ezmlm-make also creates the necessary text files in dir*/text/***.

ezmlm-make has a large number of switches to control all aspects of list generation. Only defaults or a small subset of switches are necessary for most list setups. Other options are present primarily to allow a external CGI script or other graphical user interface to use ezmlm-make to manipulate ezmlm list setups.

VIRTUAL DOMAINS

To create the list ``tl@virtual.dom'' where ``virtual.dom'' is controlled by ``vu'' (virtual.dom:vu), change identity to ``vu'' or chown files to that user after:

	ezmlm-make ~vu/dir ~vu/.qmail-tl tl virtual.dom

Thus, create the list exactly as for a list under ``alias''.

OPTIONS

All ezmlm-make letter switches except -v and -V are available for interpretation via ezmlmrc. Switches -e, -E, -c, and -C have special meaning within the program. ezmlmrc customization should respect the function of the switches described here.

-+
Switches currently active for the list will be used, as modified by the current command line. Thus, -+ makes switches ``sticky''. By default, only switches specified on the current command line will be used. This switch implies -e as it is meaningless except in edit mode. Note that the config file choice (see -c and -C) is also sticky. ezmlmrc(5) is set up so that most text files (and DIR*/headeradd***, DIR*/headerkeep***, and DIR*/headerremove***) are not overwritten if they already exist so as to preserve manual customizations. If local is specified ezmlm-make overrides this behavior and all files are rewritten. You can also force ezmlm-make to rewrite all files by using -++.

-a
(Default.) Archived and configured with ezmlm-get(1) for archive access. ezmlm-make will touch dir*/archived*** and dir*/indexed*** so that ezmlm-send(1) will archive new messages.

-A
Not archived.

-b
Block archive. Only moderators are allowed to access the archive.

-B
(Default.) Archive access is open to anyone or subscribers only, depending on the -g switch.

-c
Config. Use .ezmlmrc (see CONFIGURATION) from the directory where dot resides. ezmlm-make otherwise uses the system wide ezmlmrc file (normally /etc/indimail/ezmlm/default/ezmlmrc). The -c switch may cause you to execute ezmlm-make based on a configuration file controlled by another user. ezmlm-make does not allow periods in any tag to restrict all actions to within dir. Be careful with this option setting up lists for other users, especially when running ezmlm-make as root.

-C arg
Like -c, but use file arg as the ezmlmrc file. Use -C '' to override a default when using -+ or -e. If the given path is a directory instead of a file, the actual ezmlmrc file is taken as arg/ezmlmrc, and the other ezmlm-idx programs will use the directory to look up files (such as text files) that are not present in the list directory.

-d
Digest. ezmlm-make will set up the local*-digest@host*** digest list to disseminate digest of the list messages. By default, this is done when 30 messages, 48 hours, or 64 kbytes of message body text have accumulated since the last digest. Edit the dir*/digcount***, dir*/digsize***, or dir*/digtime*** files to override these defaults. See ezmlm-tstdig(1) and ezmlm-get(1) for more info.

-D
(Default.) No digest. Do not set up the digest list.

-e
Edit. ezmlm-make will remove links before creating them and accept if directories to be created are already present. ezmlm-make will also (via entries in ezmlmrc) remove flags that are present but not desired for the current list. Thus, this option can be used to reconfigure existing lists without affecting moderator and subscriber lists or message archive. All desired ezmlm-make switches need to be specified. To make all switches sticky, i.e. only specify the ones changed from the previous setup, use -+. Command line arguments other than dir can be omitted. In the unlikely case where dot is changed, you must manually remove the old links. Mail can arrive at any time! For safe editing, turn on the sticky bit of the home directory before using the edit function, then turn it off again (see dot-qmail(5)). ezmlmrc(5) is set up so that most text files (and DIR*/headeradd***, DIR*/headerkeep***, and DIR*/headerremove***) are not overwritten if they already exist so as to preserve manual customizations. If local is specified ezmlm-make overrides this behavior and all files are rewritten. You can also force ezmlm-make to rewrite all files by using -ee.

-E
(Default.) No edit. ezmlm-make will abort if directories or links to be created already exist. This prevents accidental reconfiguration of a pre-existing list, since the first action is to create the list directory.

-f
Prefix. ezmlm-make will set up the list so that the outgoing subject will be prefixed with the list name.

-F
(Default.) No prefix.

-g
Guard archive. Archive access requests from unrecognized SENDERs will be rejected. This restriction is safe, since replies are sent to the SENDER address.

-G
(Default.) Do not guard archive. Archive access request from any SENDER will be serviced.

-h
Help subscription. Subscriptions do not require confirmation. Strongly recommended against, since anyone can subscribe any address, but may be useful for some subscription moderated lists.

-H
(Default.) Subscription requires confirmation by reply to a message sent to the subscription address.

-i
Indexed for WWW archive access. ezmlm-make will create the list so that ezmlm-archive(1) is invoked to maintain an index suitable for use by ezmlm-cgi(1).

-I
(Default.) The list is created without ezmlm-archive(1).

-j
Jump off. Unsubscribe does not require confirmation. Strongly recommended against, since anyone can unsubscribe any address, but may be useful in some situations.

-J
(Default.) Unsubscribe requires confirmation by a reply to a message sent to the subscription address.

-k

-K
Ignored for backwards compatibility. The dir*/deny/*** subscribers directory is always created to allow denying messages from selected addresses. This is useful in combination with the -u switch to temporarily restrain offenders, such as misconfigured auto-responders or automatic spammers. It can also be used in combination with -m to filter out SENDERs from whom the moderators do not want to see posts (again, bad re-mailers and spammers come to mind).

To add/remove blacklisted addresses:

ezmlm-sub dir deny bad@host

ezmlm-unsub dir deny bad@host

-l
List subscribers. ezmlm-make sets up the list so that remote administrators can request a subscriber list, and search the subscriber log.

-L
(Default.) The subscriber list cannot be obtained.

-m
Message moderation. (Please note that the -u switch modifies the action of this switch.) ezmlm-make will touch dir*/modpost*** and create dir*/mod/*** and dir*/mod/subscribers/, where the moderator addresses are stored. ezmlm-make also creates dir/mod/pending/, dir/mod/accepted/, and dir/mod/rejected/. These directories are used to queue messages awaiting moderation. dir/editor*** will be set up to run ezmlm-store(1) to store incoming messages in the moderation queue and send moderation requests to the moderators. dir*/moderator*** will be set up to run ezmlm-moderate to process moderator accept or reject requests.

To add/remove moderators:

ezmlm-sub dir mod moderator@host

ezmlm-unsub dir mod moderator@host

-M
(Default.) Message posting is not moderated.

-n
New text file. ezmlm-make sets up the list to allow remote administrators to edit files in dir*/text/***.

-N
(Default.) Not new text file. Text file editing not allowed.

-o
Others rejected. Posts from addresses other than moderators are rejected. This is applicable to message moderated lists only (see -m). The switch has no effect on other lists.

-O
(Default.) Others not rejected. For moderated lists, all posts are forwarded to the moderators. The switch has effects only on message moderated lists.

-p
(Default.) Public. ezmlm-make will touch dir*/public***, so that ezmlm-manage(1) will respond to administrative requests and ezmlm-get will allow archive retrieval.

-P
Private. ezmlm-manage(1) and ezmlm-get(1) will allow only digest creation, remote administration, and archive retrieval by remote administrators, (if the list is configured with these options).

-q

-Q
Ignored for backwards compatibility. The request address is always serviced. Commands sent in the subject to local*-request@*host are processed by ezmlm-request(1).

-r
Remote admin. ezmlm-make enables remote administration by touching dir*/remote***. Moderator(s) can unsubscribe and subscribe any address. See the -m option on how moderator addresses are stored and manipulated.

-R
(Default.) No remote administration.

-s
Subscription moderation. ezmlm-make enables subscription moderation by touching dir*/modsub***. This affects subscriptions for both the main list and the digest list. See the -m option on how moderator addresses are stored and manipulated.

-S
(Default.) Subscriptions are not moderated.

-t
Trailer. ezmlm-make will create dir*/text/trailer*** to set up the list to add a trailer to outgoing messages.

-T
No trailer. (Default.)

-u
User posts only. ezmlm-make sets up the list so that posts and archive access is restricted to subscribers. These are addresses subscribed to the main list, the digest, or added manually to the address database in dir*/allow/*** which accommodates addresses from e.g. subscribers working from an address other than their subscriber address.

Posts from unrecognized SENDER addresses will be rejected. This is relatively easily defeated for posts. More secure alternatives are message moderated lists configured with the ezmlm-make -m switch (without the -u switch).

There is no reason to combine of SENDER checks on posts with message moderation. Therefore, the combination of the -u switch with the -m switch is used for a configuration with SENDER restrictions (like with -u alone), with the difference that posts from non-subscribers will be sent for moderation instead of being rejected. This allows the list admin to let non-subscribers post occasionally, as well as to catch subscribers posting from non-subscriber addresses.

-U
(Default.) Do not restrict posts based on SENDER address.

-v
Display ezmlm-make version information.

-V
Display ezmlm-make version information.

-w
Remove the ezmlm-warn(1) invocations from the list setup. It is assumed that ezmlm-warn(1) for both local@host and local*-digest@*host will be run by other means, such as crond. As the main list will have only sublists as subscribers, it is desirable to log bounces and feedback messages rather than to remove a bouncing subscriber.

-W
(Default.) No address restriction. Normal use of ezmlm-warn(1) and ezmlm-return(1).

-x
eXtra. ezmlm-make will configure the list with a few extras: dir*/mimeremove*** will be configured to strip annoying mime parts such as excel spreadsheets, rtf text, html text etc from the messages. Messages consisting solely of this Content-type will be rejected. See ezmlm-send(1) and ezmlm-reject(1) for more info.

-y
sender confirmation. ezmlm-make will configure the list so posting requires sender confirmation.

-Y
(Default.) No sender confirmation is required.

-0 mainlist@host
Make the list a sublist of list mainlist@host.

-3 fromarg
ezmlm-make sets up the list to replace the ``From:'' header of the message with ``From: fromarg''.

-5 owner@host
ezmlm-make will configure the list to forward mail directed to the list owner to owner@host.

-6 plugin:host:port:user:password:datab:table**
Subscriber database info. Use the database plugin named plugin which connects to host (default localhost), on port number port (default port for SQL server) as user with password using database datab (default "ezmlm") and the table root name table (default "ezmlm")

-7 /msg_mod_path
Make /path the path to the database for message moderators, if the list is set up for message moderation. /msg_mod_path must be an absolute pathname, starting with a slash. If not, it will be ignored.

-8 /sub_mod_path
Make /sub_mod_path the path to the database for subscription moderators, if the list is set up for subscription moderation. /sub_mod_path must be an absolute pathname, starting with a slash. If not, it will be ignored.

-9 /rem_adm_path
Make /path the path to the database for remote administrators, if the list is set up for remote administration. /rem_adm_path must be an absolute pathname, starting with a slash. If not, it will be ignored.

LIST EDITING

When ezmlm-make is used with the -e switch, and the list was previously created or edited with a new (ezmlm-idx >= 0.23) version of ezmlm-make, all arguments other than dir can be omitted. In this case, arguments will be read from dir*/config***. The appropriate flags must always be specified. To override dot, local, host, or code, all arguments must be specified.

CONFIGURATION

This version of ezmlm-make is template driven. The template file consists of plain text with four types of tags. Both start in the first position of the line. No other text is allowed on the same line. For security reasons, no periods are allowed anywhere in a tag. Any line with a ``#'' in position 1 is ignored, as is any text preceding the first tag.

</filename#aI/>
The following text will be copied to dir*/filename*** if the options specified after the ``#'' are active, in this case archived and not indexed. Any number of flags can be specified. This is used to adapt the files and messages to the type of list created. If no flags are used, the ``#'' can be omitted. If the file name is the same as the previous tag, or if it is omitted, the text will be added to the previous file. When a new file is opened the previous file is closed. Attempts to add more text to a already closed file overwrites its contents.

An alternative to specify that a flag, e.g. ``4'' should not be active is to prefix the switch with ``^'', e.g. use ``^4''. The ``E'' flag is treated in a special manner. When the list is being edited, it evaluates to false if the file already exists, true if it does not. Thus, files using this condition are not overwritten when editing. This is useful for files that you frequently customize manually.

</-filename#eA/>
dir*/filename*** will be erased, if the options after the ``#'' are active, in this case not archived and edit.

</+directory#aI/>
The directory ``directory'' is created if the flags specified are active, in this case archived and not indexed. If no flags are specified, the ``#'' can be omitted.

</:link/directory#aI/>
dot-link** is symlinked to dir/directory if the flags specified are active, in this case archived and not indexed. If no flags are specified, the ``#'' can be omitted.

In addition, local is substituted for <#L#>, the part of dot between the first 2 hyphens (if any) for <#1#>, the part of dot between the second and third hyphen (if any) for <#2#>, host for <#H#>, dir for <#D#>, dot for <#T#>, digestcode for <#C#>, the set of all active flags for <#F#>, the config file used for <#X#>, and the path to the ezmlm binaries for <#B#> anywhere in the text. Other tags of this format are copied to the files as is.

<#l#>, <#h#>, <#n#>, <#A#>, <#R#>, will be substituted on-the-fly where appropriate for the local or local*-digest*** local part of the list address, the host, the subscriber address or the moderation accept address, the message number, and the subscription reply address or moderation reject address, respectively. The use of <#l#> is to allow the same text file to be used for requests pertaining to both the main list and the digest list. <#h#> makes it possible to share some files between lists. <#n#> is defined only by programs where this makes sense, i.e. ezmlm-send(1) and ezmlm-get(1)

In the absence of -e and -+ switches, ezmlm-make will create the list directory before processing the template file, and create dir*/key*** after all other actions.

ezmlm-make will use /etc/indimail/ezmlm/default/ezmlmrc. This can be overridden with the -c and -C switches.

BUGS

ezmlm-make deals with the template file as us-ascii. Any occurrence of the characters ``</'' at the beginning of a line will disrupt ezmlm-make operation. Any occurrence of tags with the format ``<#X#>'' with with 'X' being any digit, 'B', 'C', 'D', 'F', 'H', 'L', or 'T' will be substituted by ezmlm-make. Any occurrence of a tag of this format with 'X' being 'h', 'l', 'A', or 'R' will be substituted by ezmlm-store and ezmlm-manage at run time. ezmlm-send will substitute tags with 'h' and 'l', and tags with 'n' will be replaced by the current message number. ezmlm-get will substitute tags ``<#h#>'', ``<#l#>'' in the same way. The tag ``<#n#>'' will be replaced by the digest message number which is the number of the first message in the digest.

In practice, these character sequences are unlikely to occur in any multi-byte character set text. They also will not occur by chance in single-byte character sets where '<', '/', and '#' retain their us-ascii codes.

BUGS

ezmlm-make cannot deal with ezmlmrc lines containing NUL (they will be truncated at the NUL). This needs to be fixed to make it 8-bit clean.

SEE ALSO

ezmlm-clean(1), ezmlm-get(1), ezmlm-manage(1), ezmlm-moderate(1), ezmlm-send(1), ezmlm-store(1), ezmlm-sub(1), ezmlm-unsub(1), ezmlm(5),

Clone this wiki locally