Skip to content

Latest commit

 

History

History
34 lines (23 loc) · 1.54 KB

Installation.md

File metadata and controls

34 lines (23 loc) · 1.54 KB
Raw

Configuration

Configure Device Layer 2 Access

The device scanner requires layer 2 access to be able to scan the network for devices.

You can configure the layer 2 access either during the onboarding of the device through the management or later on directly on the Industrial Edge Device.

During Onboarding

  1. To onboard a new device with layer 2 network access click on "+ New Edge Device" on the upper right side.

  2. Configure your device and click on "Next" to get to the network settings.

  3. Click on the "+" button at the top right to configure the network interface.
    Configure_Device_New

  4. Configure the network interface and the layer 2 access and click on "add".
    Configure_Device_Layer_2_Access

  5. Confirm the device configuration with "Next" and with "Create".

After Onboarding

  1. To adjust the layer 2 network after the creation of the device navigate to "Settings" and "Connectivity" on your edge device and click on "LAN network".

  2. Click on the edit symbol of the network interface.
    Configure_Onboarded_Device_1

  3. Configure the network interface and the layer 2 access.
    Configure_Onboarded_Device_2

  4. Apply the changes by clicking on "Update".