After converting some step files, I only get Volumes.i, but I don’t get the MCFile.i I want

[WalonMay]

Here is the .STEP file I used.
4.txt
Here is the McCADInputConfig.i file that I configured.
McCADInputConfig.txt
Here is the what I did on the command line. I would like to ask whether there is a problem with the file I configured or there are some non-convertible entities in the step file that make it impossible to convert from mcnp file to step file.

C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin>C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin\McCAD.exe` read
Running McCAD v1.1 / 2023-08-03 18:03:38

---

** Loading STEP file(s) **

---

Processing C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin\test\4.stp
Loading input solids.
OpenCascade surfaces tally:
==========================
- Planes: 277
- Cylinders: 345
- Tori: 6
- Cones: 0
- Spheres: 0
- B-Splines: 0
- Bezier Surfaces: 0
- Surfaces of Revolution: 0
- Surfaces of Extrusion: 0
- Offset Surfaces: 0
- Uknown Surfaces: 0
Execution time [m]: 0.013042

C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin>C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin\McCAD.exe run
Running McCAD v1.1 / 2023-08-03 18:03:44

---

** Loading STEP file **

---

Processing C:\Users\Administrator\Downloads\McCAD-Library-master\build\bin\test\4.stp
Loading input solids.
OpenCascade surfaces tally:
==========================
- Planes: 277
- Cylinders: 345
- Tori: 6
- Cones: 0
- Spheres: 0
- B-Splines: 0
- Bezier Surfaces: 0
- Surfaces of Revolution: 0
- Surfaces of Extrusion: 0
- Offset Surfaces: 0
- Uknown Surfaces: 0

---

** Starting decomposition **

---

Decomposing 23 shape(s) from the input STEP file(s)

• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a cylindrical solid
• Decomposing a mixed solid
• Decomposing a mixed solid

[raska-s]

Having the same problem here, with a sample geometry. Tried setting debugLevel=3 but no extra outputs. @moatazharb is there a way to view logs of what's happened during a conversion?