Copyright (c) 2016-2017 ionomy Copyright (c) 2017 🐼CEVAP🐼
`/:`
-odN:
`+mMMN-
+MMMM/.--` ..
+NMMMh/MMMMh .dMMm+
-mMMMMM/NMMMMM` .NMMMMMd
oMMMMMMM.sMMMMm. .MMMMMMs
/MMMMMMMMo `/N/ /mMMdyd-
dMMMMMMMMM- ` -+ :Mm
.MMMMMMMMMMy -MM-
:MMMMMMMMMM: `MM+
/MMMMMMMMMm ` ` dMh
:MMMMMMMMMd `+mM- /MNy: yMM.
.MMMMMMMMMN` -NMMy `hMMMd` dMMs
+MMMMMMMMM/ `ydo /dy: -MMMM:
/MMMMMMMMm` `mMMMMN.
oMMMMMMMMm/ `ydmmNy .+yNMMMMMMm`
.MMMMMMMMMMmo. `:oo- /dMMMMMMMMMMMd
NMMMMMMMMMMMMms: .:sNMMMMMMMMMMMMMMo
hmmm sMMMMMMMMMMMMMMMMNNNhmm mMMMMMMMMMMMMMN
,NMMMmymMMMMMMMMMMMMMMMd/, dMMMMMMMMMMMMs
hMMMMMMMMMMMMMMMMMMMMy- dMMMMMMMMMMMm,
,yNMMMMMMMMMMMMMMMMMMo .h-.-oMMMMMMMMMMMM:
,.:::sMMMMMMMMMMMMMs -NMMMMMMMMMMMMMMMMh
:MMMMMMMMMMMMMM+ .////NMMMMMMMMMMMd,
+hdNNMMMMNNmdy/ .-://+++/:.
- Coin Suffix: ION
- PoW Algorithm: SHA256d
- PoW Period: 2,000 Network Initiation Blocks
- PoW Median Target Spacing: 64 Seconds
- PoW Difficulty Retarget: 2 Blocks
- Full Confirmation: 60 Blocks
- PoS Algorithm: SHA256d
- PoS Target Spacing: 64 Seconds
- PoS Difficulty Retarget: 2 Blocks
- PoS Reward: Varied
- PoS Min: 1 Day
- PoS Max: Unlimited
- Total Coins: 55,000,000 ION
- Block Size: 2 Mega-bytes (MB)
Ion is a digital currency that enables instant payments to anyone, anywhere in the world. Ion uses peer-to-peer technology over ClearNet to operate with no central authority (centralisation): managing transactions and issuing currency (ION) are carried out collectively by the Ion network. Ion is the name of open source software which enables the use of the currency ION.
MainNet Parameters P2P Port = 12700 RPC Port = 12705
TestNet Parameters P2P Port = 27170 RPC Port = 27171
Some notes on how to build Ion in Unix.
Always use absolute paths to configure and compile Ion and the dependencies, for example, when specifying the the path of the dependency:
../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX
Here BDB_PREFIX must absolute path - it is defined using $(pwd) which ensures the usage of the absolute path.
Build ION-QT and IOND for LINUX (Method 1)
master
./autogen.sh;./configure;make
To build executables for Windows 64-bit, install the following dependencies: sudo apt-get install g++-mingw-w64-x86-64 mingw-w64-x86-64-dev
To build executables for Windows 64-bit, install the following dependencies:
sudo apt-get install g++-mingw-w64-x86-64 mingw-w64-x86-64-dev
Then build using:
master cd depends make HOST=x86_64-w64-mingw32 cd .. CONFIG_SITE=$PWD/depends/x86_64-w64-mingw32/share/config.site ./configure --prefix=/ make
To build executables for Windows 64-bit, install the following dependencies: sudo apt-get install g++-mingw-w64-i686 mingw-w64-i686-dev
To build executables for Windows 64-bit, install the following dependencies:
sudo apt-get install g++-mingw-w64-i686 mingw-w64-i686-dev
Then build using:
master cd depends make HOST=i686-w64-mingw32 cd .. ./autogen.sh # not required when building from tarball CONFIG_SITE=$PWD/depends/i686-w64-mingw32/share/config.site ./configure --prefix=/ make
Download and install latest QT creator, import .pro file and compile
- Start QT creator
- Open QT project file *.pro (Keyboard Shortcut: STRG+C)
- Build all (Keyboard shortcut: STRG+SHIFT+B)
Qt Wallet and Deamon, CLI version build:
qmake && make && cd src && make -f src/makefile.unix
Deamon Only Buld:
cd src && make -f src/makefile.unix
autoreconf --install ; ./configure ; makeThis will build ion without QT (no GUI) if all dependencies are met.
These dependencies are required:
| Library | Purpose | Description |
|---|---|---|
| libssl | SSL Support | Secure communications |
| libboost | Boost | C++ Library |
Optional dependencies:
| Library | Purpose | Description |
|---|---|---|
| miniupnpc | UPnP Support | Firewall-jumping support |
| libdb4.8 | Berkeley DB | Wallet storage (only needed when wallet enabled) |
| qt | GUI | GUI toolkit (only needed when GUI enabled) |
| protobuf | Payments in GUI | Data interchange format used for payment protocol (only needed when GUI enabled) |
| libqrencode | QR codes in GUI | Optional for generating QR codes (only needed when GUI enabled) |
For the versions used in the release, see release-process.md under Fetch and build inputs.
C++ compilers are memory-hungry. It is recommended to have at least 1 GB of memory available when compiling Ion Core. With 512MB of memory or less compilation will take much longer due to swap thrashing.
Build requirements:
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev
for Ubuntu 12.04 and later or Debian 7 and later libboost-all-dev has to be installed:
sudo apt-get install libboost-all-dev
db4.8 packages are available here. You can add the repository using the following command:
sudo add-apt-repository ppa:silknetwork/silknetwork
sudo apt-get update
Ubuntu 12.04 and later have packages for libdb5.1-dev and libdb5.1++-dev, but using these will break binary wallet compatibility, and is not recommended.
for Debian 7 (Wheezy) and later: The oldstable repository contains db4.8 packages. Add the following line to /etc/apt/sources.list, replacing [mirror] with any official debian mirror.
deb http://[mirror]/debian/ oldstable main
To enable the change run
sudo apt-get update
for other Debian & Ubuntu (with ppa):
sudo apt-get install libdb4.8-dev libdb4.8++-dev
Optional:
sudo apt-get install libminiupnpc-dev (see --with-miniupnpc and --enable-upnp-default)
If you want to build ion-Qt, make sure that the required packages for Qt development
are installed. Qt 5 is necessary to build the GUI.
If both Qt 4 and Qt 5 are installed, Qt 5 will be used. Pass --with-gui=qt5 to configure to choose Qt5.
To build without GUI pass --without-gui.
For Qt 5 you need the following:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev
libqrencode (optional) can be installed with:
sudo apt-get install libqrencode-dev
Once these are installed, they will be found by configure and a ion-Qt executable will be built by default.
The release is built with GCC and then "strip iond" to strip the debug symbols, which reduces the executable size by about 90%.
miniupnpc may be used for UPnP port mapping. It can be downloaded from here. UPnP support is compiled in and turned off by default. See the configure options for upnp behavior desired:
--without-miniupnpc No UPnP support miniupnp not required
--disable-upnp-default (the default) UPnP support turned off by default at runtime
--enable-upnp-default UPnP support turned on by default at runtime
To build:
tar -xzvf miniupnpc-1.6.tar.gz
cd miniupnpc-1.6
make
sudo su
make install
It is recommended to use Berkeley DB 4.8. If you have to build it yourself:
SILK_ROOT=$(pwd)
# Pick some path to install BDB to, here we create a directory within the silk directory
BDB_PREFIX="${SILK_ROOT}/db4"
mkdir -p $BDB_PREFIX
# Fetch the source and verify that it is not tampered with
wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
echo '12edc0df75bf9abd7f82f821795bcee50f42cb2e5f76a6a281b85732798364ef db-4.8.30.NC.tar.gz' | sha256sum -c
# -> db-4.8.30.NC.tar.gz: OK
tar -xzvf db-4.8.30.NC.tar.gz
# Build the library and install to our prefix
cd db-4.8.30.NC/build_unix/
# Note: Do a static build so that it can be embedded into the exectuable, instead of having to find a .so at runtime
../dist/configure --prefix=/usr/local --enable-cxx
make
sudo make install
Note: You only need Berkeley DB if the wallet is enabled (see the section Disable-Wallet mode below).
If you need to build Boost yourself:
sudo su
./bootstrap.sh
./bjam install
To help make your Ion installation more secure by making certain attacks impossible to exploit even if a vulnerability is found, binaries are hardened by default.
Hardening enables the following features:
-
Position Independent Executable Build position independent code to take advantage of Address Space Layout Randomization offered by some kernels. An attacker who is able to cause execution of code at an arbitrary memory location is thwarted if he doesn't know where anything useful is located. The stack and heap are randomly located by default but this allows the code section to be randomly located as well.
On an Amd64 processor where a library was not compiled with -fPIC, this will cause an error such as: "relocation R_X86_64_32 against `......' can not be used when making a shared object;"
To test that you have built PIE executable, install scanelf, part of paxutils, and use:
scanelf -e ./iondThe output should contain: TYPE ET_DYN
-
Non-executable Stack If the stack is executable then trivial stack based buffer overflow exploits are possible if vulnerable buffers are found. By default, silk should be built with a non-executable stack but if one of the libraries it uses asks for an executable stack or someone makes a mistake and uses a compiler extension which requires an executable stack, it will silently build an executable without the non-executable stack protection.
To verify that the stack is non-executable after compiling use:
scanelf -e ./iondthe output should contain: STK/REL/PTL RW- R-- RW-
The STK RW- means that the stack is readable and writeable but not executable. <<<<<<< HEAD
=======
master