A small pen holder with embedded Raspberry Pi Pico W and square 1.3" LCD display. Shows todays date and cycles through some hard-coded tasks.
- Todo - connect to a Google calendar and show todays events.
- Todo - A switch or sensor to change the mode when the pen is removed
- Todo - Some buttons or touch controls
https://thepihut.com/products/1-3-spi-colour-lcd-240x240-breakout
https://thepihut.com/products/raspberry-pi-pico-w
- 3-5V to any 5V or 3V pin
- CS to GP17
- SCK to GP18
- MOSI to GP19
- DC to GP16
- BL to GP20
- GND to any ground pin
- Ender 3 Neo v2 - standard settings / PLA filament
Had a few issues with the flat bridging below the pen, first layer missed a bit but it worked out ok. Will work well with supports if you have problems with the bridging.
