Skip to content

Latest commit

 

History

History
126 lines (91 loc) · 2.53 KB

README.md

File metadata and controls

126 lines (91 loc) · 2.53 KB

growattRS232

PyPI GitHub issues

Python wrapper for getting data asynchronously from Growatt inverters via serial usb RS232 connection and modbus RTU protocol.

The Growatt inverted must support the modbus protocol (some older inverters only support proprietary serial communication) Connect the RS232 DB9 usb adapter to the RS232 port on the underside of the inverter (you might have to remove a cover plate).

Attributes

Depending on the firmware version of your inverter, not all attributes might be available

Inverter properties

  • serial_number
  • model_number
  • firmware

DC input PV

  • input_power
  • input_energy_today

DC input string 1 PV

  • input_1_amperage
  • input_1_voltage
  • input_1_power
  • input_1_energy_today
  • input_1_energy_total

DC input string 2 PV

  • input_2_amperage
  • input_2_voltage"
  • input_2_power"
  • input_2_energy_today"
  • input_2_energy_total"

AC output grid

  • output_power
  • output_energy_today
  • output_energy_total
  • power_factor
  • output_reactive_power
  • output_reactive_energy_today
  • output_reactive_energy_total

AC output phase 1 grid

  • output_1_voltage
  • output_1_amperage
  • output_1_power

AC output phase 2 grid

  • output_2_voltage
  • output_2_amperage
  • output_2_power

AC output phase 3 grid

  • output_3_voltage
  • output_3_amperage
  • output_3_power

Miscellaneous information

  • operation_hours
  • frequency
  • temperature
  • ipm_temperature
  • p_bus_voltage
  • n_bus_voltage
  • derating_mode
  • derating

Status, faults & warnings

  • status
  • status_code
  • fault_code
  • fault
  • warning_code
  • warning_value
  • warning

How to use the package

import asyncio
import logging
from sys import argv

from growattRS232 import GrowattRS232

# defaults
# USB port of RS232 converter
DEFAULT_PORT = "/dev/ttyUSB0"
# Growatt modbus address
DEFAULT_ADDRESS = 0x1

logging.basicConfig(level=logging.DEBUG)


async def main():
    port = str(argv[1]) if len(argv) > 1 else DEFAULT_PORT
    address = int(argv[2]) if len(argv) > 2 else DEFAULT_ADDRESS
    growattRS232 = GrowattRS232(port, address)
    try:
        data = await growattRS232.async_update()
        print(f"Sensors data: {data}")
    except Exception as error:
        print("Error: " + repr(error))


loop = asyncio.get_event_loop()
loop.run_until_complete(main())
loop.close()