Skip to content

Latest commit

 

History

History
439 lines (318 loc) · 17.1 KB

CONTRIBUTING.md

File metadata and controls

439 lines (318 loc) · 17.1 KB

Contributing

The process for contributing code to Kubernetes via SIG-cli community.

Note: This page is focused on helping new contributors become active members of the community through sustained contributions.

Introduction

Welcome to the Kubernetes sig-cli contributing guide. We are excited about the prospect of you joining our community! Mentoring and on-boarding new contributors is critical to the success of the project.

Please be aware that all contributions to Kubernetes require time and commitment from project maintainers to direct and review work. This is done in additional to many other maintainer responsibilities, and direct engagement from maintainers is a finite resource.

Pick your track

Determine in what capacity you are looking to contribute:

Guided

Who is this for?

Contributors looking to engage with the SIG cli community for a sustained period of time and looking to build working relationships with existing members. Route to becoming a SIG cli member as a reviewer or approver.

How does it work?

Work items come from a backlog of groomed items provided by SIG cli community members. Each items has a stake holder willing to provide limited direction to contributors working on it. Contributors typically need to put in 10x the time per-issue as the maintainers providing direction. Contributors are expected to learn and do research to complete the task independently with only periodic direction (~weekly).

What is expected of contributors?

Contributors are expected to make progress on items weekly and provide periodic updates to any issue they are working on. Contributors are expected exercise ownership of their code by fixing bugs that are discovered.

Self service

Who is this for?

Contributors that are looking to contribute only 1 or 2 items, or have a specific issue they would like to like resolve and are willing to contribute the solution.

How does it work?

Contributors are free to pick up any work items that they like. Maintainers will be focused on directing contributors working on Guided items, so contributors picking up non-Guided items will have almost no direction or support from maintainers.

What is expected of contributors?

Contributions must be relatively small, simple, well documented and well tested. Since maintainers will need to own any code for these contributions, these should be very limited in scope and contain minimal risk (e.g. simple regression fixes, improved documentation, improved testing).

Before You Begin

Note: Complete the following steps before reaching out to cli community members.

Agree to contribution rules

Follow the CLA signup instructions.

Learn a bit about the kubectl cli

This is important.

Modify your own kubectl fork

Make sure you are ready to immediately get started before you claim any piece of work.

  • Setup your development environment.
    • This is hard. Sorry. We want to make this easier.
  • Familiarize yourself with the code:
  • Try adding a new command to do something simple:
    • Add kubectl hello-world: print "Hello World"
    • Add kubectl hello-kubernetes -f file: Print "Hello <kind of resource> <name of resource>"
    • Add kubectl hello-kubernetes type/name: Print "Hello <kind of resource> <name of resource> <creation time>"

Note: Consider publishing your command to a fork so a maintainer can look at it.

Your first contribution

Adopt an issue

Pick up an issue from the backlog by commenting on the issue that you would like to work on it. Be sure to mention the author of the issue as well as the SIG cli members @seans3 and @mengqiy.

Using the following comment will make it easier for us to search for issues folks want to have assigned to them:

cc @seans3 @mengqiy I would like to take this

Note: Don't do this unless you will start work on the issue within a few days of being assigned.

Note: GitHub only allows issues to be assigned to GitHub accounts that are part of the organization or listed as outside collaborators. In order to become an outside collaborator, contributors have to have shown commitment to the issue by performing some work. Once you have begun, reach out to the issue author and show them your progress (e.g. in a fork).

Picking your first issue

For your first issue, we recommend picking an issue labeled with "good first issue" from the issue backlog.

Picking the right size of issue

Be sure to pick up an issue that is appropriate to the time you are able to commit. We recommend first time contributors start with small or medium issues.

Following are very rough estimates, but are best effort only. They assume you have a development environment already set up and are able to build a kubectl binary and use it against a cluster. These estimates assume some knowledge of Go.

  • size/S
    • 4-10 hours
  • size/M
    • 10-20 hours
  • size/L
    • 20+ hours
  • size/XL
    • 40-80 hours

Meta/Umbrella issues may have multiple components. By signing up for a Meta/Umbrella issue, you are only committing to one piece of it. Let the issue author know when you have completed some piece of it, and if you would like to continue working on it, or have it unassigned.

Picking the right kind of issue

Guided issues have a type defining the type of work to be done. Pick up an issue that fits your experience level and interest. Documentation and test-coverage issues typically are smaller in scope and easier to complete than features and cleanup issues.

  • type/code-cleanup
    • Usually some refactoring or small rewrites of code.
  • type/code-documentation
    • Write doc.go with package overview and examples or add code comments to document existing types and functions.
  • type/code-feature
    • Usually a new go package / library for some functionality that is requested. Should be encapsulated in its own interfaces with thorough unit tests for the new library.
  • type/code-test-coverage
    • Audit tests for a package. Run coverage tools and also manually look at what functions are missing unit or integration tests. Write tests for these functions.

Provide periodic status updates

Once you have requested an issue and it has been accepted, you will be expected to provide periodic updates to it. Do update the issue with your status at least every week, and publish your work to a fork so the community can see your progress and provide early feedback.

If you find the issue is too challenging, time consuming, or you are no longer able to work on it, this is perfectly acceptable and please let the issue author know. If you like, you may pick up a different issue immediately or sometime in the future.

Summary:

  • Don't pick up an issue until you are ready to start working on it
  • When you want to pick up an issue, be sure to comment @seans3 and @mengqiy. Expect a response within 2 days.
  • Update the issue every week with your progress so we know it is being actively worked on.
  • There is an expectation that some time will be committed to working on the issue each week until it is completed, or you are blocked on a maintainer.

Meet the community

Engage with the SIG cli community! Let us know who you are and how things are going!

  • Fill out the about me form so we know a bit about you and can direct your work accordingly.

    • Note: After filling out the form, reach out via slack or the googlegroup and let us know.
  • Message the cli mentors googlegroup and let them know you filled out the form and are looking to get started.

  • In slack (signup here), @mention a lead and ask if there are any issues you could pick up, or let them know what you are working on.

  • Attend a sig-cli meeting and introduce yourself and what you are working on.

  • The sig-cli community page lists sig-cli leads, channels of communication, and group meeting times.

Information about how Features are developed

Once you have made several contributions, you may want to start developing features that you come up with. This section is about how to propose new features and get them accepted.

Feature requests

New contributors: Please start by adopting an existing issue.

A feature request is an issue mentioning @kubernetes/sig-cli-feature-requests.

To encourage readership, the issue description should concisely (2-4 sentence) describe the problem that the feature addresses.

Feature lifecycle

Working on a feature without getting approval for the user experience and software design often results in wasted time and effort due to decisions around flag names, command names, and specific command behavior.

To minimize wasted work and improve communication across efforts, the user experience and software design must be agreed upon before any PRs are sent for code review.

  1. Identify a problem by filing an issue (mention @kubernetes/sig-cli-feature-requests).
  2. Submit a design proposal and get it approved by a lead.
  3. Announce the proposal as an agenda item for the sig-cli meeting.
  • Ensures awareness and feedback.
  • Should be included in meeting notes sent to the sig-cli group.
  1. Merge the proposal PR after approval and announcement.
  2. A lead adds the associated feature to the feature repo, ensuring that
    • release-related decisions are properly made and communicated,
    • API changes are vetted,
    • testing is completed,
    • docs are completed,
    • feature is designated alpha, beta or GA.
  3. Implement the code per discussion in bug lifecycle.
  4. Update kubectl docs.
  5. Wait for your feature to appear in the next Kubernetes release!

Design Proposals

New contributors: Please start by adopting an existing issue.

A design proposal is a single markdown document in the design repo that follows the design template.

To make one,

  • Prepare the markdown document as a PR to that repo.
    • Avoid Work In Progress (WIP) PRs (send it only after you consider it complete).
    • For early feedback, use the email discussion group.
  • Mention @kubernetes/sig-cli-proposals in the description.
  • Mention the related feature request.

Expect feedback from 2-3 different sig-cli community members.

Incorporate feedback and comment PTAL.

Once a lead has agreed (via review commentary) that design and code review resources can be allocated to tackle the proposal, the details of the user experience and design should be discussed in the community.

This step is important; it prevents code churn and thrashing around issues like flag names, command names, etc.

It is normal for sig-cli community members to push back on feature proposals. sig-cli development and review resources are extremely constrained. Community members are free to say

  • No, not this release (or year).
  • This is desirable but we need help on these other existing issues before tackling this.
  • No, this problem should be solved in another way.

The proposal can be merged into the design repo after leads approval and discussion as a meeting agenda item.

Then coding can begin.

Implementation

Contributors can begin implementing a feature before any of the above steps have been completed, but should not send a PR until the design proposal has been merged.

See the development guide for instructions on setting up the Kubernetes development environment.

Implementation PRs should

  • mention the issue of the associated design proposal,
  • mention @kubernetes/sig-cli-pr-reviews,
  • include tests.

Small features and flag changes require only unit/integration tests, while larger changes require both unit/integration tests and e2e tests.

Report progress

Leads need your help to ensure that progress is made to get the feature into a release.

While working on the issue, leave a weekly update on the issue including:

  1. What's finished?
  2. What's part is being worked on now?
  3. Anything blocking?

Documentation

Let users know about cool new features by updating user facing documentation.

Depending on the contributor and size of the feature, this may be done either by the same contributor that implemented the feature, or another contributor who is more familiar with the existing docs templates.

Release

Several weeks before a Kubernetes release, development enters a stabilization period where no new features are merged. For a feature to be accepted into a release, it must be fully merged and tested by this time. If your feature is not fully complete, including tests, it will have to wait until the next release.

Merge state meanings

  • Merged:
    • Ready to be implemented.
  • Unmerged:
    • Experience and design still being worked out.
    • Not a high priority issue but may implement in the future: revisit in 6 months.
    • Unintentionally dropped.
  • Closed:
    • Not something we plan to implement in the proposed manner.
    • Not something we plan to revisit in the next 12 months.

Escalation

If your bug issue is stuck

If an issue isn't getting any attention and is unresolved, mention @kubernetes/sig-cli-bugs.

Highlight the severity and urgency of the issue. For severe issues escalate by contacting sig leads and attending the meeting.

If your feature request issue is stuck

If an issue isn't getting any attention and is unresolved, mention @kubernetes/sig-cli-feature-requests.

If a particular issue has a high impact for you or your business, make sure this is clear on the bug, and reach out to the sig leads directly. Consider attending the sig meeting to discuss over video conference.

If your PR is stuck

It may happen that your PR seems to be stuck without clear actionable feedback for a week or longer. A PR associated with a bug or design proposal is much less likely to be stuck than a dangling PR.

However, if it happens do the following:

  • If your PR is stuck for a week or more because it has never gotten any comments, mention @kubernetes/sig-cli-pr-reviews and ask for attention.
  • If your PR is stuck for a week or more after it got comments, but the attention has died down. Mention the reviewer and comment with PTAL.

If you are still not able to get any attention after a couple days, escalate to sig leads by mentioning them.

If your design proposal issue is stuck

It may happen that your design doc gets stuck without getting merged or additional feedback. If you believe that your design is important and has been dropped, or it is not moving forward, please add it to the sig cli bi-weekly meeting agenda and mail the group saying you'd like to discuss it.

General escalation instructions

See the sig-cli community page for points of contact and meeting times:

Use of @mentions

  • @{any lead} solicit opinion or advice from leads.
  • @kubernetes/sig-cli-bugs sig-cli centric bugs.
  • @kubernetes/sig-cli-pr-reviews triggers review of code fix PR.
  • @kubernetes/sig-cli-feature-requests flags a feature request.
  • @kubernetes/sig-cli-proposals flags a design proposal.