Skip to content

jagpreetsinghsasan/besu-kubernetes

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Besu-Kubernetes (k8s)

The following repo has example reference implementations of private networks using k8s. This is intended to get developers and ops people familiar with how to run a private ethereum network in k8s and understand the concepts involved.

It provides examples using multiple tools such as kubectl, helm, helmfile etc. Please select the one that meets your deployment requirements.

Local Development:

The reference examples in this repo can be used locally, to get familiar with the deployment setup. You will require:

Minikube defaults to 2 CPU's and 2GB of memory, unless configured otherwise. We recommend you starting with at least 8GB, depending on the amount of nodes you are spinning up - the recommended requirements for each besu node are 4GB

minikube start --memory 16384
# or with RBAC
minikube start --memory 16384 --extra-config=apiserver.Authorization.Mode=RBAC

Verify kubectl and minikube are working with

$ kubectl version
Client Version: version.Info{Major:"1", Minor:"15", GitVersion:"v1.15.1", GitCommit:"4485c6f18cee9a5d3c3b4e523bd27972b1b53892", GitTreeState:"clean", BuildDate:"2019-07-18T09:18:22Z", GoVersion:"go1.12.5", Compiler:"gc", Platform:"linux/amd64"}
Server Version: version.Info{Major:"1", Minor:"15", GitVersion:"v1.15.0", GitCommit:"e8462b5b5dc2584fdcd18e6bcfe9f1e4d970a529", GitTreeState:"clean", BuildDate:"2019-06-19T16:32:14Z", GoVersion:"go1.12.5", Compiler:"gc", Platform:"linux/amd64"}

Install helm & helm-diff: Please note that the documentation and steps listed use helm3. The API has been updated so please take that into account if using an older version

$ helm plugin install https://github.com/databus23/helm-diff --version master

Pick the deployment tool that suits your environment and then change directory and follow the Readme.md files there.

Namespaces: Currently we do not deploy anything in the 'default' namespace. Anything related to Besu gets spun up in a 'besu' namespace, the monitoring pieces get spun up in a 'monitoring' namespace. Namespaces are part of the setup and do not need to be created via kubectl prior to deploying. To change the namespaces:

  • In Kubectl, you need to edit every file in the deployment
  • In Helm, edit the namespace value in the values.yaml

It is recommended you follow this approach as well in your production setups and where possible use Service Accounts to secure deployments & statefulsets. We make use of these extensively.

Monitoring: The example setups all have out custom Grafana dashboard to make monitoring of the nodes and network easier.

We use the default ports 3000 for grafana and 9090 for prometheus deployments, and the respective Nodeport services use ports 30030 and 30090. Credentials are admin:password Open the 'Besu Dashboard' to see the status of the nodes on your network. If you do not see the dashboard, click on Dashboards -> Manage and select the dashboard from there

Please configure the kubernetes scraper and grafana security to suit your requirements, Grafana supports multiple options that can be configured using env vars

Ingress Controllers:

If you require the use of ingress controllers for the RPC calls or the monitoring dashboards, we have provided examples with rules that are configured to do so.

Please use these as a reference and develop solutions to match your network topology and requirements.

Production Network Guidelines:

⚠️ Note: After you have familiarised yourself with the examples in this repo, it is recommended that you design your network based on your needs, taking the following guidelines into account

Pod Resources:

The templates in this repository have been set to run locally on Minikube to get the user familiar with the setup. Hence the resources are set to:

besu:
  pvcSizeLimit: "1Gi"
  pvcStorageClass: "standard"
  memRequest: "1024Mi"
  memLimit: "2048Mi"
  cpuRequest: "100m"
  cpuLimit: "500m"

orion:
  pvcSizeLimit: "1Gi"
  pvcStorageClass: "standard"
  memRequest: "512Mi"
  memLimit: "1024Mi"
  cpuRequest: "100m"
  cpuLimit: "500m"

When designing your setup to run in staging or production environments, please ensure you grant at least 4GB of memory to Besu pods and 2GB of memory to Orion pods. Also ensure you select the appropriate storage class and size for your nodes.

Ensure that if you are using a cloud provider you have enough spread across AZ's to minimize risks - refer to our HA and [Load Balancing] (https://besu.hyperledger.org/en/latest/HowTo/Configure/Configure-HA/Sample-Configuration/) documentation

When deploying a private network, eg: IBFT you need to ensure that the bootnodes are accessible to all nodes on the network. Although the minimum number needed is 1, we recommend you use more than 1 spread across AZ's. In addition we also recommend you spread validators across AZ's and have a sufficient number available in the event of an AZ going down.

You need to ensure that the genesis file is accessible to all nodes joining the network.

Network Topology and High Availability requirements:

Ensure that if you are using a cloud provider you have enough spread across AZ's to minimize risks - refer to our HA and [Load Balancing] (https://besu.hyperledger.org/en/latest/HowTo/Configure/Configure-HA/Sample-Configuration/) documentation

When deploying a private network, eg: IBFT you need to ensure that the bootnodes are accessible to all nodes on the network. Although the minimum number needed is 1, we recommend you use more than 1 spread across AZ's. In addition we also recommend you spread validators across AZ's and have a sufficient number available in the event of an AZ going down.

You need to ensure that the genesis file is accessible to all nodes joining the network.

Hyperledger Besu supports NAT mechanisms and the default is set to automatically handle NAT environments. If you experience issues with NAT and logs have messages that have the NATService throwing exceptions connecting to external IPs, please add this option in your Besu deployments --nat-method = NONE

Data Volumes:

Ensure that you provide enough capacity for data storage for all nodes that are going to be on the cluster. Select the appropriate type of persitent volume based on your cloud provider.

Nodes:

Consider the use of statefulsets instead of deployments for nodes. The term 'node' refers to bootnode, validator and network nodes.

Configuration of nodes can be done either via a single item inside a config map, as Environment Variables or as command line options. Please refer to the Configuration section of our documentation

RBAC:

We encourage the use of RBAC's for access to the private key of each node, ie. only a specific pod/statefulset is allowed to access a specific secret. If you need to specify a Kube config file to each pod please use the KUBE_CONFIG_PATH variable

Monitoring

As always please ensure you have sufficient monitoring and alerting setup.

Besu publishes metrics to Prometheus and metrics can be configured using the kubernetes scraper config.

Besu also has a custom Grafana dashboard to make monitoring of the nodes easier.

For ease of use, the kubectl & helm examples included have both installed and included as part of the setup. Please configure the kubernetes scraper and grafana security to suit your requirements, grafana supports multiple options that can be configured using env vars

We also have example ingress controller config rules, should you want to use a setup that makes use of ingress controllers.

Logging

Besu's logs can be configured to suit your environment. For example, if you would like to log to file and then have parsed via logstash into an ELK cluster, please follow out documentation.

New nodes joining the network:

The general rule is that any new nodes joining the network need to have the following accessible:

  • genesis.json of the network
  • Bootnodes need to be accessible on the network
  • Bootnodes enode's (public key and IP) should be passed in at boot
  • If you’re using permissioning on your network, specifically authorise the new nodes

If the initial setup was on Kubernetes, you have the following scenarios:

1. New node also being provisioned on the K8S cluster:

In this case anything that applies to how current nodes are provisioned should be applicable and the only thing that need be done is increase the number of replicas

2. New node being provisioned elsewhere

Ensure that the host being provisioned can find and connect to the bootnode's. You may need to use traceroute, telnet or the like to ensure you have connectivity. Once connectivity has been verified, you need to pass the enode of the bootnodes and the genesis file to the node. This can be done in many ways, for example query the k8s cluster via APIs prior to joining if your environment allows for that. Alternatively put this data somewhere accessible to new nodes that may join in future as well, and pass the values in at runtime.

Ensure that the host being provisioned can also connect to the other nodes that you have on the k8s cluster, otherwise it will be unable to connect to any peers (bar the bootnodes). The most reliable way to do this is via a VPN so it has access to the bootnodes as well as any nodes on the k8s cluster. You can alternatively use ingresses on the nodes (ideally more than just bootnodes) you wish to expose, where TCP & UDP on port 30303 need to be open for discovery.

Additionally if you’re using permissioning on your network you will also have to specifically authorise the new nodes

About

kubernetes example implementations

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Smarty 88.5%
  • Shell 11.5%