Skip to content

jameswu5/Poker

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

80 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Poker

Evaluating Poker Hands

Representing cards

When we would like to optimise a program, we would like to use as many primitive types (int, string, etc…) as possible. Therefore, it makes sense to model a playing card as an int. Now we technically only need to store information about its rank and its suit, which can very easily be encoded into 32 bits. Therefore we can use this encoding method:

xxxbbbbb bbbbbbbb cdhsrrrr xxpppppp

Here, a bit labeled b is activated depending on the rank of the card with the order (from least to most significant bit) being ace, king, …, three, two. One of the four bits labelled cdhs is turned on depending on the suit of the card. The bits labelled rrrr store the rank of the card, with the lowest rank being 2 with value 0, and the highest rank being ace with value 12. Finally, the bits labelled pppppp store the corresponding prime number of the rank, so rank 2 will have the first prime number, and rank ace will have the 12th prime number.

Evaluating the hand

Let’s begin with the end in mind: there are 7462 distinct poker hands, so we would like our evaluator to take in any 5-card hand as input, and return a number between 1 and 7462 which represents how good it is, with 0 being the best possible hand. That way, to compare two hands, we can simply evaluate the two and compare the number returned. Since we pass in 5 cards, let’s (for convenience) call them c1, c2, up to c5 respectively.

First, let’s consider hands whose five cards all have distinct rank. This is a nice property because we can condense these hands into a lookup table of size 7937 where the index is determined by the key:

key = (c1 | c2 | c3 | c4 | c5) >> 16

The OR operations collect the ranks of the cards, and we right shift it by 16 to keep the key within the range 0 and 7936, which is the highest possible index (0b1111100000000). There are two cases for those whose five cards all have distinct rank: they are flushes (all also have the same suit), or they aren’t.

Let’s start by detecting flushes. We can easily verify if we have a flush by evaluating

c1 & c2 & c3 & c4 & c5 & 0xF000

where 0xF000 is the mask for the suit of the card (part labelled cdhs). By using the AND operation, if the resulting value is non-zero, then all five cards must have the same suit and thus we have a flush. We now have two cases: whether they form a straight or not. If they do, they form a straight flush and are the strongest hand.

We create a lookup table called FlushLookup, an array of size 7937, where the index is determined by the key described above. Now to populate this lookup table, we deal with the straight flushes first. We iterate through the keys all possible straights (there are only ten of them) and populate this lookup table first. Then we can build up the rest of the lookup table from the worst hand to the best hand, decrementing the score value each time. We can do this by finding the next lexicographic bit sequence that also has 5 bits activated with a bit hack found here. For example, the next lexicographic bit sequence of 0b0000110111000 is 0b0000111000011 , the smallest integer bigger than the former that also has 5 bits activated.

We can use the same method to create a lookup table called UniqueLookup, an array of size 7937, for hands with 5 distinct ranks but do not form a flush. We populate this lookup table essentially the same way as we did for FlushLookup, except now the straights are just straights so we set the score of the highest straight to a different value, and the non-straights are hands representing nothing, the weakest hands.

With this established, we see that while the same elements of UniqueLookup and FlushLookup will be populated, they will contain different values. To demonstrate this, FlushLookup[0b1111100000000] should contain 1 as it’s the score of the highest straight flush, while UniqueLookup[0b1111100000000] should contain 1600, the score of the highest straight.

All that remains is to create look up tables for hands that have repeating ranks. For this, we have to use a different key for indexing, as we lose information about how many times the rank appears by using the key described above. Here, we can use the uniqueness property of product of primes to create a new key:

key2 = (c1 & 0xFF) * (c2 & 0xFF) * ... * (c5 & 0xFF)

where the 0xFF extracts the prime part of our representation of the card. It is no longer feasible to use an array since these keys can get very large: in the event of quad aces with king kicker, we have a key of $41^4 \times 37 = 104553157$ which is too high to justify using an array. Therefore, we use a hashmap RepeatedLookup. Populating this hashmap is a little similar to before, we consider each hand and iteratively generate better and better versions of this hand by using for loops and decrement the score each time until we reach the best hand.

With these lookup tables populated, it becomes very easy and efficient to evaluate a hand of five cards. We first check if it’s a flush by checking c1 & c2 & c3 & c4 & c5 & 0xF000 > 0. If so, we simply compute the key k = (c1 | c2 | c3 | c4 | c5) >> 16 and return FlushLookup[k].

If it’s not a flush, we check if all five cards are distinct. If so, we return UniqueLookup[k].

If they’re not distinct either, we calculate the key q = (c1 & 0xFF) * (c2 & 0xFF) * ... * (c5 & 0xFF). We simply return RepeatedLookup[q] and we’re done.

In games like Texas Hold’em, if we would like to evaluate a hand of seven cards, we simply iterate through all possible $7 \choose 5$ combinations of five cards and return the best hand value out of these.

Resources

Cactus Kev’s Poker Hand Evaluator

Bit Twiddling Hacks

About

Texas Hold'em + Efficient Hand Evaluator

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages