diff --git a/src/build123d/objects_sketch.py b/src/build123d/objects_sketch.py
index 3052f69a..1350346f 100644
--- a/src/build123d/objects_sketch.py
+++ b/src/build123d/objects_sketch.py
@@ -1,619 +1,630 @@
-"""
-Sketch Objects
-
-name: objects_sketch.py
-by:   Gumyr
-date: March 22nd 2023
-
-desc:
-    This python module contains objects (classes) that create 2D Sketches.
-
-license:
-
-    Copyright 2022 Gumyr
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-
-"""
-from __future__ import annotations
-
-from math import cos, pi, radians, sin, tan
-from typing import Union
-
-from build123d.build_common import LocationList, validate_inputs
-from build123d.build_enums import Align, FontStyle, Mode
-from build123d.build_sketch import BuildSketch
-from build123d.geometry import Axis, Location, Rotation, Vector, VectorLike
-from build123d.topology import Compound, Edge, Face, ShapeList, Sketch, Wire, tuplify
-
-
-class BaseSketchObject(Sketch):
-    """BaseSketchObject
-
-    Base class for all BuildSketch objects
-
-    Args:
-        face (Face): face to create
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
-            Defaults to None.
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        obj: Union[Compound, Face],
-        rotation: float = 0,
-        align: Union[Align, tuple[Align, Align]] = None,
-        mode: Mode = Mode.ADD,
-    ):
-        if align is not None:
-            align = tuplify(align, 2)
-            bbox = obj.bounding_box()
-            align_offset = []
-            for i in range(2):
-                if align[i] == Align.MIN:
-                    align_offset.append(-bbox.min.to_tuple()[i])
-                elif align[i] == Align.CENTER:
-                    align_offset.append(
-                        -(bbox.min.to_tuple()[i] + bbox.max.to_tuple()[i]) / 2
-                    )
-                elif align[i] == Align.MAX:
-                    align_offset.append(-bbox.max.to_tuple()[i])
-            obj.move(Location(Vector(*align_offset)))
-
-        context: BuildSketch = BuildSketch._get_context(self, log=False)
-        if context is None:
-            new_faces = obj.moved(Rotation(0, 0, rotation)).faces()
-
-        else:
-            self.rotation = rotation
-            self.mode = mode
-
-            obj = obj.moved(Rotation(0, 0, rotation))
-
-            new_faces = [
-                face.moved(location)
-                for face in obj.faces()
-                for location in LocationList._get_context().local_locations
-            ]
-            if isinstance(context, BuildSketch):
-                context._add_to_context(*new_faces, mode=mode)
-
-        super().__init__(Compound.make_compound(new_faces).wrapped)
-
-
-class Circle(BaseSketchObject):
-    """Sketch Object: Circle
-
-    Add circle(s) to the sketch.
-
-    Args:
-        radius (float): circle size
-        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
-            Defaults to (Align.CENTER, Align.CENTER).
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        radius: float,
-        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        self.radius = radius
-        self.align = tuplify(align, 2)
-
-        face = Face.make_from_wires(Wire.make_circle(radius))
-        super().__init__(face, 0, self.align, mode)
-
-
-class Ellipse(BaseSketchObject):
-    """Sketch Object: Ellipse
-
-    Add ellipse(s) to sketch.
-
-    Args:
-        x_radius (float): horizontal radius
-        y_radius (float): vertical radius
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
-            Defaults to (Align.CENTER, Align.CENTER).
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        x_radius: float,
-        y_radius: float,
-        rotation: float = 0,
-        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        self.x_radius = x_radius
-        self.y_radius = y_radius
-        self.align = tuplify(align, 2)
-
-        face = Face.make_from_wires(Wire.make_ellipse(x_radius, y_radius))
-        super().__init__(face, rotation, self.align, mode)
-
-
-class Polygon(BaseSketchObject):
-    """Sketch Object: Polygon
-
-    Add polygon(s) defined by given sequence of points to sketch.
-
-    Args:
-        pts (VectorLike): sequence of points defining the vertices of polygon
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
-            Defaults to (Align.CENTER, Align.CENTER).
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        *pts: VectorLike,
-        rotation: float = 0,
-        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        self.pts = pts
-        self.align = tuplify(align, 2)
-
-        poly_pts = [Vector(p) for p in pts]
-        face = Face.make_from_wires(Wire.make_polygon(poly_pts))
-        super().__init__(face, rotation, self.align, mode)
-
-
-class Rectangle(BaseSketchObject):
-    """Sketch Object: Rectangle
-
-    Add rectangle(s) to sketch.
-
-    Args:
-        width (float): horizontal size
-        height (float): vertical size
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
-            Defaults to (Align.CENTER, Align.CENTER).
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        width: float,
-        height: float,
-        rotation: float = 0,
-        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        self.width = width
-        self.rectangle_height = height
-        self.align = tuplify(align, 2)
-
-        face = Face.make_rect(height, width)
-        super().__init__(face, rotation, self.align, mode)
-
-
-class RectangleRounded(BaseSketchObject):
-    """Sketch Object: RectangleRounded
-
-    Add rectangle(s) with filleted corners to sketch.
-
-    Args:
-        width (float): horizontal size
-        height (float): vertical size
-        radius (float): fillet radius
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
-            Defaults to (Align.CENTER, Align.CENTER).
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        width: float,
-        height: float,
-        radius: float,
-        rotation: float = 0,
-        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        if width <= 2 * radius or height <= 2 * radius:
-            raise ValueError("width and height must be > 2*radius")
-        self.width = width
-        self.rectangle_height = height
-        self.radius = radius
-        self.align = tuplify(align, 2)
-
-        face = Face.make_rect(height, width)
-        face = face.fillet_2d(radius, face.vertices())
-        super().__init__(face, rotation, align, mode)
-
-
-class RegularPolygon(BaseSketchObject):
-    """Sketch Object: Regular Polygon
-
-    Add regular polygon(s) to sketch.
-
-    Args:
-        radius (float): distance from origin to vertices
-        side_count (int): number of polygon sides
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
-            Defaults to (Align.CENTER, Align.CENTER).
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        radius: float,
-        side_count: int,
-        rotation: float = 0,
-        align: tuple[Align, Align] = (Align.CENTER, Align.CENTER),
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        if side_count < 3:
-            raise ValueError(
-                f"RegularPolygon must have at least three sides, not {side_count}"
-            )
-        self.radius = radius
-        self.side_count = side_count
-        self.align = align
-
-        pts = ShapeList(
-            [
-                Vector(
-                    radius * cos(i * 2 * pi / side_count + radians(rotation)),
-                    radius * sin(i * 2 * pi / side_count + radians(rotation)),
-                )
-                for i in range(side_count + 1)
-            ]
-        )
-        pts_sorted = [pts.sort_by(Axis.X), pts.sort_by(Axis.Y)]
-        # pylint doesn't recognize that a ShapeList of Vector is valid
-        # pylint: disable=no-member
-        mins = [pts_sorted[0][0].X, pts_sorted[1][0].Y]
-        maxs = [pts_sorted[0][-1].X, pts_sorted[1][-1].Y]
-
-        if align is not None:
-            align = tuplify(align, 2)
-            align_offset = []
-            for i in range(2):
-                if align[i] == Align.MIN:
-                    align_offset.append(-mins[i])
-                elif align[i] == Align.CENTER:
-                    align_offset.append(0)
-                elif align[i] == Align.MAX:
-                    align_offset.append(-maxs[i])
-        else:
-            align_offset = [0, 0]
-        pts = [point + Vector(*align_offset) for point in pts]
-
-        face = Face.make_from_wires(Wire.make_polygon(pts))
-        super().__init__(face, rotation=0, align=None, mode=mode)
-
-
-class SlotArc(BaseSketchObject):
-    """Sketch Object: Arc Slot
-
-    Add slot(s) following an arc to sketch.
-
-    Args:
-        arc (Union[Edge, Wire]): center line of slot
-        height (float): diameter of end circles
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        arc: Union[Edge, Wire],
-        height: float,
-        rotation: float = 0,
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        self.arc = arc
-        self.slot_height = height
-
-        arc = arc if isinstance(arc, Wire) else Wire.make_wire([arc])
-        face = Face.make_from_wires(arc.offset_2d(height / 2)).rotate(Axis.Z, rotation)
-        super().__init__(face, rotation, None, mode)
-
-
-class SlotCenterPoint(BaseSketchObject):
-    """Sketch Object: Center Point Slot
-
-    Add a slot(s) defined by the center of the slot and the center of one of the
-    circular arcs at the end. The other end will be generated to create a symmetric
-    slot.
-
-    Args:
-        center (VectorLike): slot center point
-        point (VectorLike): slot center of arc point
-        height (float): diameter of end circles
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        center: VectorLike,
-        point: VectorLike,
-        height: float,
-        rotation: float = 0,
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        center_v = Vector(center)
-        point_v = Vector(point)
-        self.slot_center = center_v
-        self.point = point_v
-        self.slot_height = height
-
-        half_line = point_v - center_v
-        face = Face.make_from_wires(
-            Wire.combine(
-                [
-                    Edge.make_line(point_v, center_v),
-                    Edge.make_line(center_v, center_v - half_line),
-                ]
-            )[0].offset_2d(height / 2)
-        )
-        super().__init__(face, rotation, None, mode)
-
-
-class SlotCenterToCenter(BaseSketchObject):
-    """Sketch Object: Center to Center points Slot
-
-    Add slot(s) defined by the distance between the center of the two
-    end arcs.
-
-    Args:
-        center_separation (float): distance between two arc centers
-        height (float): diameter of end circles
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        center_separation: float,
-        height: float,
-        rotation: float = 0,
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        self.center_separation = center_separation
-        self.slot_height = height
-
-        face = Face.make_from_wires(
-            Wire.make_wire(
-                [
-                    Edge.make_line(Vector(-center_separation / 2, 0, 0), Vector()),
-                    Edge.make_line(Vector(), Vector(+center_separation / 2, 0, 0)),
-                ]
-            ).offset_2d(height / 2)
-        )
-        super().__init__(face, rotation, None, mode)
-
-
-class SlotOverall(BaseSketchObject):
-    """Sketch Object: Center to Center points Slot
-
-    Add slot(s) defined by the overall with of the slot.
-
-    Args:
-        width (float): overall width of the slot
-        height (float): diameter of end circles
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
-            Defaults to (Align.CENTER, Align.CENTER).
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        width: float,
-        height: float,
-        rotation: float = 0,
-        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        self.width = width
-        self.slot_height = height
-
-        face = Face.make_from_wires(
-            Wire.make_wire(
-                [
-                    Edge.make_line(Vector(-width / 2 + height / 2, 0, 0), Vector()),
-                    Edge.make_line(Vector(), Vector(+width / 2 - height / 2, 0, 0)),
-                ]
-            ).offset_2d(height / 2)
-        )
-        super().__init__(face, rotation, align, mode)
-
-
-class Text(BaseSketchObject):
-    """Sketch Object: Text
-
-    Add text(s) to the sketch.
-
-    Args:
-        txt (str): text to be rendered
-        font_size (float): size of the font in model units
-        font (str, optional): font name. Defaults to "Arial".
-        font_path (str, optional): system path to font library. Defaults to None.
-        font_style (Font_Style, optional): style. Defaults to Font_Style.REGULAR.
-        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
-            Defaults to (Align.CENTER, Align.CENTER).
-        path (Union[Edge, Wire], optional): path for text to follow. Defaults to None.
-        position_on_path (float, optional): the relative location on path to position the
-            text, values must be between 0.0 and 1.0. Defaults to 0.0.
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        txt: str,
-        font_size: float,
-        font: str = "Arial",
-        font_path: str = None,
-        font_style: FontStyle = FontStyle.REGULAR,
-        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
-        path: Union[Edge, Wire] = None,
-        position_on_path: float = 0.0,
-        rotation: float = 0,
-        mode: Mode = Mode.ADD,
-    ) -> Compound:
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        self.txt = txt
-        self.font_size = font_size
-        self.font = font
-        self.font_path = font_path
-        self.font_style = font_style
-        self.align = align
-        self.text_path = path
-        self.position_on_path = position_on_path
-        self.rotation = rotation
-        self.mode = mode
-
-        text_string = Compound.make_text(
-            txt=txt,
-            font_size=font_size,
-            font=font,
-            font_path=font_path,
-            font_style=font_style,
-            align=tuplify(align, 2),
-            position_on_path=position_on_path,
-            text_path=path,
-        )
-        super().__init__(text_string, rotation, None, mode)
-
-
-class Trapezoid(BaseSketchObject):
-    """Sketch Object: Trapezoid
-
-    Add trapezoid(s) to the sketch.
-
-    Args:
-        width (float): horizontal width
-        height (float): vertical height
-        left_side_angle (float): bottom left interior angle
-        right_side_angle (float, optional): bottom right interior angle. If not provided,
-            the trapezoid will be symmetric. Defaults to None.
-        rotation (float, optional): angles to rotate objects. Defaults to 0.
-        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
-            Defaults to (Align.CENTER, Align.CENTER).
-        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
-
-    Raises:
-        ValueError: Give angles result in an invalid trapezoid
-    """
-
-    _applies_to = [BuildSketch._tag]
-
-    def __init__(
-        self,
-        width: float,
-        height: float,
-        left_side_angle: float,
-        right_side_angle: float = None,
-        rotation: float = 0,
-        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
-        mode: Mode = Mode.ADD,
-    ):
-        context = BuildSketch._get_context(self)
-        validate_inputs(context, self)
-
-        right_side_angle = left_side_angle if not right_side_angle else right_side_angle
-
-        self.width = width
-        self.trapezoid_height = height
-        self.left_side_angle = left_side_angle
-        self.right_side_angle = right_side_angle
-        self.align = tuplify(align, 2)
-
-        # Calculate the reduction of the top on both sides
-        reduction_left = (
-            0 if left_side_angle == 90 else height / tan(radians(left_side_angle))
-        )
-        reduction_right = (
-            0 if right_side_angle == 90 else height / tan(radians(right_side_angle))
-        )
-        if reduction_left + reduction_right >= width:
-            raise ValueError("Trapezoid top invalid - change angles")
-        pts = []
-        pts.append(Vector(-width / 2, -height / 2))
-        pts.append(Vector(width / 2, -height / 2))
-        pts.append(Vector(width / 2 - reduction_right, height / 2))
-        pts.append(Vector(-width / 2 + reduction_left, height / 2))
-        pts.append(pts[0])
-        face = Face.make_from_wires(Wire.make_polygon(pts))
-        super().__init__(face, rotation, self.align, mode)
+"""
+Sketch Objects
+
+name: objects_sketch.py
+by:   Gumyr
+date: March 22nd 2023
+
+desc:
+    This python module contains objects (classes) that create 2D Sketches.
+
+license:
+
+    Copyright 2022 Gumyr
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+"""
+from __future__ import annotations
+
+from math import cos, pi, radians, sin, tan
+from typing import Union
+
+from build123d.build_common import LocationList, validate_inputs
+from build123d.build_enums import Align, FontStyle, Mode
+from build123d.build_sketch import BuildSketch
+from build123d.geometry import Axis, Location, Rotation, Vector, VectorLike
+from build123d.topology import Compound, Edge, Face, ShapeList, Sketch, Wire, tuplify
+
+
+class BaseSketchObject(Sketch):
+    """BaseSketchObject
+
+    Base class for all BuildSketch objects
+
+    Args:
+        face (Face): face to create
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
+            Defaults to None.
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        obj: Union[Compound, Face],
+        rotation: float = 0,
+        align: Union[Align, tuple[Align, Align]] = None,
+        mode: Mode = Mode.ADD,
+    ):
+        if align is not None:
+            align = tuplify(align, 2)
+            bbox = obj.bounding_box()
+            align_offset = []
+            for i in range(2):
+                if align[i] == Align.MIN:
+                    align_offset.append(-bbox.min.to_tuple()[i])
+                elif align[i] == Align.CENTER:
+                    align_offset.append(
+                        -(bbox.min.to_tuple()[i] + bbox.max.to_tuple()[i]) / 2
+                    )
+                elif align[i] == Align.MAX:
+                    align_offset.append(-bbox.max.to_tuple()[i])
+            obj.move(Location(Vector(*align_offset)))
+
+        context: BuildSketch = BuildSketch._get_context(self, log=False)
+        if context is None:
+            new_faces = obj.moved(Rotation(0, 0, rotation)).faces()
+
+        else:
+            self.rotation = rotation
+            self.mode = mode
+
+            obj = obj.moved(Rotation(0, 0, rotation))
+
+            new_faces = [
+                face.moved(location)
+                for face in obj.faces()
+                for location in LocationList._get_context().local_locations
+            ]
+            if isinstance(context, BuildSketch):
+                context._add_to_context(*new_faces, mode=mode)
+
+        super().__init__(Compound.make_compound(new_faces).wrapped)
+
+
+class Circle(BaseSketchObject):
+    """Sketch Object: Circle
+
+    Add circle(s) to the sketch.
+
+    Args:
+        radius (float): circle size
+        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
+            Defaults to (Align.CENTER, Align.CENTER).
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        radius: float,
+        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        self.radius = radius
+        self.align = tuplify(align, 2)
+
+        face = Face.make_from_wires(Wire.make_circle(radius))
+        super().__init__(face, 0, self.align, mode)
+
+
+class Ellipse(BaseSketchObject):
+    """Sketch Object: Ellipse
+
+    Add ellipse(s) to sketch.
+
+    Args:
+        x_radius (float): horizontal radius
+        y_radius (float): vertical radius
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
+            Defaults to (Align.CENTER, Align.CENTER).
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        x_radius: float,
+        y_radius: float,
+        rotation: float = 0,
+        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        self.x_radius = x_radius
+        self.y_radius = y_radius
+        self.align = tuplify(align, 2)
+
+        face = Face.make_from_wires(Wire.make_ellipse(x_radius, y_radius))
+        super().__init__(face, rotation, self.align, mode)
+
+
+class Polygon(BaseSketchObject):
+    """Sketch Object: Polygon
+
+    Add polygon(s) defined by given sequence of points to sketch.
+
+    Args:
+        pts (VectorLike): sequence of points defining the vertices of polygon
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
+            Defaults to (Align.CENTER, Align.CENTER).
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        *pts: VectorLike,
+        rotation: float = 0,
+        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        self.pts = pts
+        self.align = tuplify(align, 2)
+
+        poly_pts = [Vector(p) for p in pts]
+        face = Face.make_from_wires(Wire.make_polygon(poly_pts))
+        super().__init__(face, rotation, self.align, mode)
+
+
+class Rectangle(BaseSketchObject):
+    """Sketch Object: Rectangle
+
+    Add rectangle(s) to sketch.
+
+    Args:
+        width (float): horizontal size
+        height (float): vertical size
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
+            Defaults to (Align.CENTER, Align.CENTER).
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        width: float,
+        height: float,
+        rotation: float = 0,
+        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        self.width = width
+        self.rectangle_height = height
+        self.align = tuplify(align, 2)
+
+        face = Face.make_rect(height, width)
+        super().__init__(face, rotation, self.align, mode)
+
+
+class RectangleRounded(BaseSketchObject):
+    """Sketch Object: RectangleRounded
+
+    Add rectangle(s) with filleted corners to sketch.
+
+    Args:
+        width (float): horizontal size
+        height (float): vertical size
+        radius (float): fillet radius
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
+            Defaults to (Align.CENTER, Align.CENTER).
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        width: float,
+        height: float,
+        radius: float,
+        rotation: float = 0,
+        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        if width <= 2 * radius or height <= 2 * radius:
+            raise ValueError("width and height must be > 2*radius")
+        self.width = width
+        self.rectangle_height = height
+        self.radius = radius
+        self.align = tuplify(align, 2)
+
+        face = Face.make_rect(height, width)
+        face = face.fillet_2d(radius, face.vertices())
+        super().__init__(face, rotation, align, mode)
+
+
+class RegularPolygon(BaseSketchObject):
+    """Sketch Object: Regular Polygon
+
+    Add regular polygon(s) to sketch.
+
+    Args:
+        radius (float): distance from origin to vertices (major), or
+            optionally from the origin to side (minor) with major_radius = False
+        side_count (int): number of polygon sides
+        major_radius (bool): If True the radius is the major radius, else the
+            radius is the minor radius (also known as inscribed radius).
+            Defaults to True.
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
+            Defaults to (Align.CENTER, Align.CENTER).
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        radius: float,
+        side_count: int,
+        major_radius: bool = True,
+        rotation: float = 0,
+        align: tuple[Align, Align] = (Align.CENTER, Align.CENTER),
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        if side_count < 3:
+            raise ValueError(
+                f"RegularPolygon must have at least three sides, not {side_count}"
+            )
+
+        if major_radius:
+            rad = radius
+        else:
+            rad = radius * cos(pi / side_count)
+
+        self.radius = rad
+        self.side_count = side_count
+        self.align = align
+
+        pts = ShapeList(
+            [
+                Vector(
+                    rad * cos(i * 2 * pi / side_count + radians(rotation)),
+                    rad * sin(i * 2 * pi / side_count + radians(rotation)),
+                )
+                for i in range(side_count + 1)
+            ]
+        )
+        pts_sorted = [pts.sort_by(Axis.X), pts.sort_by(Axis.Y)]
+        # pylint doesn't recognize that a ShapeList of Vector is valid
+        # pylint: disable=no-member
+        mins = [pts_sorted[0][0].X, pts_sorted[1][0].Y]
+        maxs = [pts_sorted[0][-1].X, pts_sorted[1][-1].Y]
+
+        if align is not None:
+            align = tuplify(align, 2)
+            align_offset = []
+            for i in range(2):
+                if align[i] == Align.MIN:
+                    align_offset.append(-mins[i])
+                elif align[i] == Align.CENTER:
+                    align_offset.append(0)
+                elif align[i] == Align.MAX:
+                    align_offset.append(-maxs[i])
+        else:
+            align_offset = [0, 0]
+        pts = [point + Vector(*align_offset) for point in pts]
+
+        face = Face.make_from_wires(Wire.make_polygon(pts))
+        super().__init__(face, rotation=0, align=None, mode=mode)
+
+
+class SlotArc(BaseSketchObject):
+    """Sketch Object: Arc Slot
+
+    Add slot(s) following an arc to sketch.
+
+    Args:
+        arc (Union[Edge, Wire]): center line of slot
+        height (float): diameter of end circles
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        arc: Union[Edge, Wire],
+        height: float,
+        rotation: float = 0,
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        self.arc = arc
+        self.slot_height = height
+
+        arc = arc if isinstance(arc, Wire) else Wire.make_wire([arc])
+        face = Face.make_from_wires(arc.offset_2d(height / 2)).rotate(Axis.Z, rotation)
+        super().__init__(face, rotation, None, mode)
+
+
+class SlotCenterPoint(BaseSketchObject):
+    """Sketch Object: Center Point Slot
+
+    Add a slot(s) defined by the center of the slot and the center of one of the
+    circular arcs at the end. The other end will be generated to create a symmetric
+    slot.
+
+    Args:
+        center (VectorLike): slot center point
+        point (VectorLike): slot center of arc point
+        height (float): diameter of end circles
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        center: VectorLike,
+        point: VectorLike,
+        height: float,
+        rotation: float = 0,
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        center_v = Vector(center)
+        point_v = Vector(point)
+        self.slot_center = center_v
+        self.point = point_v
+        self.slot_height = height
+
+        half_line = point_v - center_v
+        face = Face.make_from_wires(
+            Wire.combine(
+                [
+                    Edge.make_line(point_v, center_v),
+                    Edge.make_line(center_v, center_v - half_line),
+                ]
+            )[0].offset_2d(height / 2)
+        )
+        super().__init__(face, rotation, None, mode)
+
+
+class SlotCenterToCenter(BaseSketchObject):
+    """Sketch Object: Center to Center points Slot
+
+    Add slot(s) defined by the distance between the center of the two
+    end arcs.
+
+    Args:
+        center_separation (float): distance between two arc centers
+        height (float): diameter of end circles
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        center_separation: float,
+        height: float,
+        rotation: float = 0,
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        self.center_separation = center_separation
+        self.slot_height = height
+
+        face = Face.make_from_wires(
+            Wire.make_wire(
+                [
+                    Edge.make_line(Vector(-center_separation / 2, 0, 0), Vector()),
+                    Edge.make_line(Vector(), Vector(+center_separation / 2, 0, 0)),
+                ]
+            ).offset_2d(height / 2)
+        )
+        super().__init__(face, rotation, None, mode)
+
+
+class SlotOverall(BaseSketchObject):
+    """Sketch Object: Center to Center points Slot
+
+    Add slot(s) defined by the overall with of the slot.
+
+    Args:
+        width (float): overall width of the slot
+        height (float): diameter of end circles
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
+            Defaults to (Align.CENTER, Align.CENTER).
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        width: float,
+        height: float,
+        rotation: float = 0,
+        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        self.width = width
+        self.slot_height = height
+
+        face = Face.make_from_wires(
+            Wire.make_wire(
+                [
+                    Edge.make_line(Vector(-width / 2 + height / 2, 0, 0), Vector()),
+                    Edge.make_line(Vector(), Vector(+width / 2 - height / 2, 0, 0)),
+                ]
+            ).offset_2d(height / 2)
+        )
+        super().__init__(face, rotation, align, mode)
+
+
+class Text(BaseSketchObject):
+    """Sketch Object: Text
+
+    Add text(s) to the sketch.
+
+    Args:
+        txt (str): text to be rendered
+        font_size (float): size of the font in model units
+        font (str, optional): font name. Defaults to "Arial".
+        font_path (str, optional): system path to font library. Defaults to None.
+        font_style (Font_Style, optional): style. Defaults to Font_Style.REGULAR.
+        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
+            Defaults to (Align.CENTER, Align.CENTER).
+        path (Union[Edge, Wire], optional): path for text to follow. Defaults to None.
+        position_on_path (float, optional): the relative location on path to position the
+            text, values must be between 0.0 and 1.0. Defaults to 0.0.
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        txt: str,
+        font_size: float,
+        font: str = "Arial",
+        font_path: str = None,
+        font_style: FontStyle = FontStyle.REGULAR,
+        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
+        path: Union[Edge, Wire] = None,
+        position_on_path: float = 0.0,
+        rotation: float = 0,
+        mode: Mode = Mode.ADD,
+    ) -> Compound:
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        self.txt = txt
+        self.font_size = font_size
+        self.font = font
+        self.font_path = font_path
+        self.font_style = font_style
+        self.align = align
+        self.text_path = path
+        self.position_on_path = position_on_path
+        self.rotation = rotation
+        self.mode = mode
+
+        text_string = Compound.make_text(
+            txt=txt,
+            font_size=font_size,
+            font=font,
+            font_path=font_path,
+            font_style=font_style,
+            align=tuplify(align, 2),
+            position_on_path=position_on_path,
+            text_path=path,
+        )
+        super().__init__(text_string, rotation, None, mode)
+
+
+class Trapezoid(BaseSketchObject):
+    """Sketch Object: Trapezoid
+
+    Add trapezoid(s) to the sketch.
+
+    Args:
+        width (float): horizontal width
+        height (float): vertical height
+        left_side_angle (float): bottom left interior angle
+        right_side_angle (float, optional): bottom right interior angle. If not provided,
+            the trapezoid will be symmetric. Defaults to None.
+        rotation (float, optional): angles to rotate objects. Defaults to 0.
+        align (Union[Align, tuple[Align, Align]], optional): align min, center, or max of object.
+            Defaults to (Align.CENTER, Align.CENTER).
+        mode (Mode, optional): combination mode. Defaults to Mode.ADD.
+
+    Raises:
+        ValueError: Give angles result in an invalid trapezoid
+    """
+
+    _applies_to = [BuildSketch._tag]
+
+    def __init__(
+        self,
+        width: float,
+        height: float,
+        left_side_angle: float,
+        right_side_angle: float = None,
+        rotation: float = 0,
+        align: Union[Align, tuple[Align, Align]] = (Align.CENTER, Align.CENTER),
+        mode: Mode = Mode.ADD,
+    ):
+        context = BuildSketch._get_context(self)
+        validate_inputs(context, self)
+
+        right_side_angle = left_side_angle if not right_side_angle else right_side_angle
+
+        self.width = width
+        self.trapezoid_height = height
+        self.left_side_angle = left_side_angle
+        self.right_side_angle = right_side_angle
+        self.align = tuplify(align, 2)
+
+        # Calculate the reduction of the top on both sides
+        reduction_left = (
+            0 if left_side_angle == 90 else height / tan(radians(left_side_angle))
+        )
+        reduction_right = (
+            0 if right_side_angle == 90 else height / tan(radians(right_side_angle))
+        )
+        if reduction_left + reduction_right >= width:
+            raise ValueError("Trapezoid top invalid - change angles")
+        pts = []
+        pts.append(Vector(-width / 2, -height / 2))
+        pts.append(Vector(width / 2, -height / 2))
+        pts.append(Vector(width / 2 - reduction_right, height / 2))
+        pts.append(Vector(-width / 2 + reduction_left, height / 2))
+        pts.append(pts[0])
+        face = Face.make_from_wires(Wire.make_polygon(pts))
+        super().__init__(face, rotation, self.align, mode)