JW-Modules

d(-_-)b Useful, Musical, and Fun ¯\_(ツ)_/¯

Modules for VCV Rack by Jeremy Wentworth

Add JW-Modules through the vcv library.

Support me on Patreon or make a one time donation with Paypal

SimpleClock

Video

Outputs 1/4 notes by default because of legacy issues - See right click menu to change the rate...

Knobs

Clock knob: determines speed of clock
Random Reset knob: If down all the way, this does nothing. If turned up, the chances of sending out a reset trigger on a clock step is increased.

Outputs

Clock output: Clock sends out a trigger at a certain interval based on the clock knob position.
Reset output: trigger is sent out when the clock is started by clicking 'run' or if random reset knob is turned up
/4 output: clock divided by 4 ticks
/8 output: clock divided by 8 ticks
/16 output: clock divided by 16 ticks
/32 output: clock divided by 32 ticks

NoteSeq

Basics

Left side of module is for sequencer control, generation, and modification.
Right side of module is mainly for controlling the outputs.
You can right+click the module to select the number of polyphonic channels.
You can click and drag cells in the grid to toggle them on and off.
Here is a video of a patch from init

Left

Clock Input: when source sends a trigger, the sequence moves to the next step
Length Input: cv for length
Length Knob: the sequence length indicated by the vertical purple line
Mode: the play mode changes how it moved through a sequence
Reset Input and Button: resets to first step in sequence (based on the play mode)
Clear Input and Button: clears the grid
RND Mode: changes what happens when you trigger the random input or button
Random Trig Input and Button: clears the grid and generates random notes (based on the rnd mode)
Random Amount Input and Knob: determines how full the grid will be when generating random notes
Shift Up Trig Input and Button: moves the cells in the grid the number of rows set by the amount knob (notes wrap around to the bottom)
Shift Down Trig Input and Button: moves the cells in the grid down the number of rows set by the amount knob (notes wrap around to the top)
Shift Chaos Trig Input and Button: moves each cell in a random direction with the distance determined by the amount knob (notes wrap around)
Shift Amount Knob: determines how much to shift the cells
Rotate Right Input and Button: rotates the cells in the grid clockwise 90 degrees
Rotate Left Input and Button: rotates the cells in the grid counter-clockwise 90 degrees
Flip Horiz Input and Button: flips the cells in the grid right to left
Flip Vert Input and Button: flips the cells in the grid top to bottom
Life Switch: when switched to the right this turns on conway's game of life
Life Speed Knob: determines how fast to iterate the game of life (clock divided based on clock input)

Right

Individual Poly Outputs: Send out the lowest 16 active notes up from the 'Lowest Note' OR send out the lowest 16 rows up from the 'Lowest Note'. This is based on the 'Drum Mode Switch' (See Below). The lights indicate which outputs are sending out values.
Mono Outputs: can be used to select one note from a column of many notes.
Highest Note Knob: will set the orange line right above the highest note sent out the poly outputs.
Lowest Note Knob: will set the yellow line right below the lowest note sent out the poly outputs.
Drum Mode Switch: Demo Video When switched to the right, even if the note isn't 'active'(turned on) then the outputs still directly line up to the 16 lowest notes. So for example, you can program a drum beat with a kick at the lowest note and a snare on the 4th row up then connect your outputs to the lowest output and the 4th output row up and they will work more like a midi sequencer. When 'Drum Mode' is switched to the left it grabs the 16 lowest notes which are 'active'.
Octave Knob: octave for the lowest note in the grid
Note Knob: root note if scaling pitch sent to "OUT"
Scale Knob: current musical scale or none if turned up all the way to the last value
EOC Output: at the end of the loop it will send out a trigger (first clock tick after last tick in loop)
Poly Outputs: v/oct and gate as a polyphonic signal

Right Click Context Menu

Polyphony Channels allows you to select the number of polyphony channels out
Gate Mode
- Trigger: fires a trigger when step is on
- Retrigger: retriggers a new gate when step is on
- Continuous: keeps gate on until next clock tick

NoteSeqFu

Basics

basic idea inspired by the iOS app Fugue Machine
Left side of module is for sequencer control, generation, and modification.
Right side of module is mainly for controlling the play heads and outputs.
You can right+click the module to select the number of polyphonic channels.
You can click and drag cells in the grid to toggle them on and off.
You can put it in drum mode and connect a split module to each gate output

Left

Clock Input: when source sends a trigger, the sequence moves to the next step
Note Knob: root note if scaling pitch sent to "OUT"
Scale Knob: current musical scale or none if turned up all the way to the last value
Reset Input and Button: resets to first step in sequence (based on the play mode)
Clear Input and Button: clears the grid
RND Mode: changes what happens when you trigger the random input or button
Random Trig Input and Button: clears the grid and generates random notes (based on the rnd mode)
Random Amount Input and Knob: determines how full the grid will be when generating random notes
Shift Up Trig Input and Button: moves the cells in the grid the number of rows set by the amount knob (notes wrap around to the bottom)
Shift Down Trig Input and Button: moves the cells in the grid down the number of rows set by the amount knob (notes wrap around to the top)
Shift Chaos Trig Input and Button: moves each cell in a random direction with the distance determined by the amount knob (notes wrap around)
Shift Amount Knob: determines how much to shift the cells
Rotate Right Input and Button: rotates the cells in the grid clockwise 90 degrees
Rotate Left Input and Button: rotates the cells in the grid counter-clockwise 90 degrees
Flip Horiz Input and Button: flips the cells in the grid right to left
Flip Vert Input and Button: flips the cells in the grid top to bottom
Life Switch: when switched to the right this turns on conway's game of life
Life Speed Knob: determines how fast to iterate the game of life (clock divided based on clock input)

Top Right - Merged

Merged V/oct Output: max of 4 v/oct channels from each playhead merged into one polyphonic signal
Merged Gate Output: max of 4 v/oct gates from each playhead merged into one polyphonic signal

NOTE: if module right click menu set to mono, merged polyphonic output has 4 channels

NOTE: if module right click menu set to 4, merged polyphonic output has 16 channels

Right (Each play head is color coded)

Start Knob: the start offset
Length Knob: the sequence length indicated by the vertical white line and color of the play head
Mode Knob: the play mode changes how it moved through a sequence
Div Knob: the clock division to move the play head
Oct Knob: octave for the lowest note in the grid
Semi Knob: semitone offset of notes at playhead
EOC Output: at the end of the loop it will send out a trigger (first clock tick after last tick in loop)
V/oct Output: volt per octave as a polyphonic signal
Gate Output: gate as a polyphonic signal
Off/On Switch: will stop playing notes and hide the play head

Bottom Right

Repeats Switch: (was originally a bug) when playhead is set to a higher division and the clock ticks multiple times while the playhead is still on the note, it would repeat so i made it optional
Drum Mode Switch: Demo Video When switched to the right, even if the note isn't 'active'(turned on) then the outputs still directly line up to the 16 lowest notes. So for example, you can program a drum beat with a kick at the lowest note and a snare on the 4th row up then connect your outputs to the lowest output and the 4th output row up and they will work more like a midi sequencer. When 'Drum Mode' is switched to the left it grabs the 16 lowest notes which are 'active'.

Right Click Context Menu

Polyphony Channels allows you to select the number of polyphony channels out
Gate Mode
- Trigger: fires a trigger when step is on
- Retrigger: retriggers a new gate when step is on
- Continuous: keeps gate on until next clock tick

NoteSeq16

Basics

You can click and drag cells in the grid to toggle them on and off.
You can right+click the module to select the number of polyphonic channels.

Top

Clock Input: when source sends a trigger, the sequence moves to the next step
Reset Input: resets to first step in sequence (based on the play mode)
Start Input: cv for start
Start Knob: the start offset
Length Input: cv for length
Length Knob: the sequence length indicated by the vertical purple line
Mode: the play mode changes how it moved through a sequence

Bottom

Clear Button: clears the grid
Random Trig Input and Button: clears the grid and generates random notes (based on the rnd mode)
Random Amount Knob: determines how full the grid will be when generating random notes
Rotate: rotates gride clockwise
Flip: flips grid vertically
Shift: shifts grid up 1 row
Octave Knob: octave for the lowest note in the grid
Note Knob: root note if scaling pitch sent to "OUT"
Scale Knob: current musical scale or none if turned up all the way to the last value
Drum Mode Switch: When switched to the right, even if the note isn't 'active'(turned on) then the outputs still directly line up to the 16 lowest notes. So for example, you can program a drum beat with a kick at the lowest note and a snare on the 4th row up then connect your outputs to the lowest output and the 4th output row up and they will work more like a midi sequencer. When 'Drum Mode' is switched to the left it grabs the 16 lowest notes which are 'active'.
Poly Outs: Send out up to 16 active notes. This is based on the 'Drum Mode' switch.
EOC Output: at the end of the loop it will send out a trigger (first clock tick after last tick in loop)

Right Click Context Menu

Polyphony Channels allows you to select the number of polyphony channels out
Gate Mode
- Trigger: fires a trigger when step is on
- Retrigger: retriggers a new gate when step is on
- Continuous: keeps gate on until next clock tick

Trigs

Basics

You can click and drag cells in the grid to toggle them on and off.
Each track is four rows and has a color which matches it's output

Top

Clock Input: when source sends a trigger, the sequence moves to the next step
Reset Input: resets to first step in sequence (based on the play mode)
Start Input: cv for start
Start Knob: the start offset
Length Input: cv for length
Length Knob: the sequence length indicated by the vertical purple line
Mode: the play mode changes how it moved through a sequence

Bottom

Clear Button: clears the grid
Random Trig Input and Button: clears the grid and generates random notes (based on the rnd mode)
Random Amount Knob: determines how full the grid will be when generating random notes
Triggers Outputs: triggers will fire if track with same color has cell turned on
OR Output: fires if any track will fire
XOR Output: fires if only one track will fire
NOR Output: fires if no tracks will fire
EOC Output: at the end of the loop it will send out a trigger (first clock tick after last tick in loop)

Patterns

Here is the post by chaircrusher that inspired Patterns

Basics

Each row is a clock divider. Each cell is a division 1 to 16, left to right.
Each row has and 'or' output and an 'xor' output.
The 'or' output will send a trigger if it hit any of the divisions.
The 'xor' output will send a trigger if it hit exactly one of the divisions.
You can click and drag cells in the grid to toggle them on and off.
You can right+click the module to select the number of polyphonic channels.
Ever four rows there is a thicker lines in the grid which correspond to the lines in the outputs every four rows.

Top

Clock Input: when source sends a trigger, advances the clock one step
Reset Input: resets to first step
Rotate Button: rotates the grid to the right
Shift Button: shifts the grid up
Clear Button: clears the grid

Bottom

Random Trig Input and Button: clears the grid and generates random cells (based on the rnd mode)
Random Amount Knob: determines how full the grid will be when generating random cells
Poly Outs: Send out 'or' outputs or send out 'xor' outputs.

1Pattern

This module is one row of Patterns (rotated into one column)

Basics

Each cell is a clock division 1 to 16, top to bottom.
The 'or' output will send a trigger if it hit any of the divisions.
The 'xor' output will send a trigger if it hit exactly one of the divisions.
You can click and drag cells in the grid to toggle them on and off.

Top

Clock Input: when source sends a trigger, advances the clock one step
Reset Input: resets to first step
Clear Button: clears the grid
Random Trig Input and Button: clears the grid and generates random cells (based on the rnd mode)

GridSeq

Video

Example Patch

Basics

16 Step Sequencer
When a direction input is sent a trigger and a cell is entered, a voltage will be sent to the OUT port if the cell's gate is on.
Each cell has a main voltage knob, a smaller probability knob, and a gate button.

Top Direction Inputs

Right Input: on trigger move right one cell and send out value if gate is on for that cell
Left Input: on trigger move left one cell and send out value if gate is on for that cell
Down Input: on trigger move down one cell and send out value if gate is on for that cell
Up Input: on trigger move up one cell and send out value if gate is on for that cell
RND: on trigger move one cell in a random direction and send out value if gate is on for that cell
REPEAT: stay on current cell and send out value if gate is on for that cell

NOTE 1: You can click the arrows or words above the inputs to trigger them.

Left

RUN: values are sent to outputs if running
RESET Button: move to top left cell on click
RESET Input: move to top left cell on trigger
GATE OUT: sends out gate if current cell gate is on and sequencer is running
GATE OUT YX: instead of using the gate of the current cell it uses the gate of the cell at the inverted position (so if top right is current, bottom left is used)
OUT: sends out the current value (pitch knob) for the current cell if the gate is on and sequencer is running
OUT YX: instead of using the value of the current cell it uses the value of the cell at the inverted position (so if top right is current, bottom left is used)

Bottom

ROOT Knob: root note if scaling pitch sent to "OUT"
OCTAVE Knob: current musical octave
SCALE Knob: current musical scale or none if turned up all the way to the last value
RND GATE Button randomize gate only for each cell
RND GATE Input on trigger randomize gate only for each cell
RND PROB Button randomize probability only for each cell
RND PROB Input on trigger, randomize probability only for each cell
RND NOTE Button randomize pitch only for each cell
RND NOTE Input on trigger, randomize pitch only for each cell

If you shift + click the random buttons, parameters will be set to their default values

Right Click Context Menu

Gate Mode
- Trigger: fires a trigger when step is on
- Retrigger: retriggers a new gate when step is on
- Continuous: keeps gate on until next clock tick
- Ignore Gate for V/OCT Out: If you want the pitch to continue changing even if the gates are not on, you can right click the module and check 'Ignore Gate for V/OCT Out'. This can create interesting effects, for example, when gate is triggering an envelope with a long release.
Random Button Mode (applies to two bottom right randomize buttons)
- Random: full range possible when randomizing knobs
- First is Minimum: the first knob on the top left will be used as the minimum value when randomizing all knobs
- First is Maximum: the first knob on the top left will be used as the maximum value when randomizing all knobs

8Seq

Basics

It's like gridseq but simpler (no step direction handling) and you can use the probability as cv instead of not probabability.

Controls

Length Knob: length of sequence
Prob Switch: If on(up), then probability is used to decide if a gate is sent out. If off(down), then probability is NOT used to decide if a gate is sent out. (this way you can just use the probability as cv and not related to the gates)

Inputs

Clock Input: clock to move the steps along in a standard pattern
Length Input: length of sequence
Reset Input: reset back to beginning

Outputs

Gate Out: Sends out gates debepending on probobility
V/oct Out: Sends out pitch
EOC Out: Sends out end of cycle triggeer at the end of the length of the loop (first clock tick after last tick in loop)
Prob Out: Sends out voltage of current probability knob value

Bottom

ROOT Knob: root note if scaling pitch sent to "OUT"
OCTAVE Knob: current musical octave
SCALE Knob: current musical scale or none if turned up all the way to the last value
RND GATE Button randomize gate only for each cell
RND GATE Input on trigger randomize gate only for each cell
RND PROB Button randomize probability only for each cell
RND PROB Input on trigger, randomize probability only for each cell
RND NOTE Button randomize pitch only for each cell
RND NOTE Input on trigger, randomize pitch only for each cell

If you shift + click the random buttons, parameters will be set to their default values

Right Click Context Menu

Gate Mode
- Trigger: fires a trigger when step is on
- Retrigger: retriggers a new gate when step is on
- Continuous: keeps gate on until next clock tick
- Ignore Gate for V/OCT Out: If you want the pitch to continue changing even if the gates are not on, you can right click the module and check 'Ignore Gate for V/OCT Out'. This can create interesting effects, for example, when gate is triggering an envelope with a long release.
Random Button Mode (applies to two bottom right randomize buttons)
- Random: full range possible when randomizing knobs
- First is Minimum: the first knob on the top left will be used as the minimum value when randomizing all knobs
- First is Maximum: the first knob on the top left will be used as the maximum value when randomizing all knobs

DivSeq

Inspired by the max for live device PX-18

Basics

16 step sequencer where each step can have a division to play. So if a step division (small knob) is 3 then that step would play every 3 steps.

NOTE: You may want to trigger a reset after changing division knobs. This will reset all counters.

Controls

Length Knob: length of sequence
Reset Button: this resets to the beginning of the sequence and resets all step counters.

Inputs

Clock Input: clock to move the steps along in a standard pattern
Length Input: length of sequence
Reset Input: this resets to the beginning of the sequence and resets all step counters.

Outputs

Gate Out: Sends out gates debepending on probobility
V/oct Out: Sends out pitch
EOC Out: Sends out end of cycle triggeer at the end of the length of the loop (first clock tick after last tick in loop)

Bottom

ROOT Knob: root note if scaling pitch sent to "OUT"
OCTAVE Knob: current musical octave
SCALE Knob: current musical scale or none if turned up all the way to the last value
RND GATE Button randomize gate only for each cell
RND GATE Input on trigger randomize gate only for each cell
RND DIV Button randomize divisions only for each cell
RND DIV Input on trigger, randomize divisions only for each cell
RND NOTE Button randomize pitch only for each cell
RND NOTE Input on trigger, randomize pitch only for each cell

If you shift + click the random buttons, parameters will be set to their default values

Right Click Context Menu

Gate Mode
- Trigger: fires a trigger when step is on
- Retrigger: retriggers a new gate when step is on
- Continuous: keeps gate on until next clock tick
- Ignore Gate for V/OCT Out: If you want the pitch to continue changing even if the gates are not on, you can right click the module and check 'Ignore Gate for V/OCT Out'. This can create interesting effects, for example, when gate is triggering an envelope with a long release.
Random Button Mode (applies to two bottom right randomize buttons)
- Random: full range possible when randomizing knobs
- First is Minimum: the first knob on the top left will be used as the minimum value when randomizing all knobs
- First is Maximum: the first knob on the top left will be used as the maximum value when randomizing all knobs

AbcdSeq

Basics

Rows A, B, C, and D are step sequencers. The order that the step sequences play is based on the text input. So ABAC will play row A until its length, and then play row B until its length, then row A until its length, then row C until its length, then loop around to the first character. Upper case will play the sequence forwards and lower case will play the sequence backwards.

Controls

Reset Button: this resets to the beginning of the sequence
Length Knobs: length of each sequence

Inputs

Row Order: Possible characters: A, B, C, D will jump to those rows, O will jump to any other row, R will jump to any row. S will repeat the same row as previous letter. If the text box is empty then it will just loop over rows ABCD. Upper case will play the sequence forwards and lower case will play the sequence backwards.
Clock Input: clock to move the steps along to the right and to the next row
Reset Input: this resets to the beginning of the sequence and resets all step counters.
Length Inputs: length of each sequence

Outputs

Gate Out: Sends out gates
CV Out: Sends out cv based on quantizer settings
Velocity Out: Sends out cv 0-10
EOC Out: Sends out trigger at the end of the sequence of letters

Bottom

ROOT Knob: root note if scaling pitch sent to "OUT"
OCTAVE Knob: current musical octave
SCALE Knob: current musical scale or none if turned up all the way to the last value
RND GATE Button randomize gate only for each cell
RND GATE Input on trigger randomize gate only for each cell
RND VEL Button randomize velocities only for each cell
RND VEL Input on trigger, randomize velocities only for each cell
RND NOTE Button randomize pitch only for each cell
RND NOTE Input on trigger, randomize pitch only for each cell
RND TXT Button randomize text
RND TXT Input on trigger, randomize text

If you shift + click the random buttons, parameters will be set to their default values

Right Click Context Menu

Gate Mode
- Trigger: fires a trigger when step is on
- Retrigger: retriggers a new gate when step is on
- Continuous: keeps gate on until next clock tick
- Ignore Gate for V/OCT Out: If you want the pitch to continue changing even if the gates are not on, you can right click the module and check 'Ignore Gate for V/OCT Out'. This can create interesting effects, for example, when gate is triggering an envelope with a long release.

Str1ker

SEE ALSO: Str1ke Tempo Management System Documentation

Outputs 1/16 notes by default - See right click menu to change the rate...

Max For Live Device for setting lives BPM to the same value as Str1ker

Str1kerBridge.amxd

Controls

On/Off Switch: turns the clock on and off
Main Fader: Adjusts BPM - range determined by range knob
100's knob: Changes BPM by increments of 100
10's knob: Changes BPM by increments of 10
1's knob: Changes BPM by increments of 1
.00's knob: Changes BPM by increments of 0.01

Inputs

Fader In: Modulates the fader position
Reset In: Resets clock
BPM In: Sets BPM 0-10v scales to 0-1000 BPM

Outputs

Clock Out: Sends out clock ticks
BPM Out: Sends out BPM 0-10v scales to 0-1000 BPM
Reset Out: Sends out clock reset

Right Click Context Menu

1/4 Notes: The clock will tick on the 1/4 notes of the BPM
1/8 Notes: The clock will tick on the 1/8 notes of the BPM
1/16 Notes: The clock will tick on the 1/16 notes of the BPM
1/32 Notes: The clock will tick on the 1/32 notes of the BPM
1/64 Notes: The clock will tick on the 1/64 notes of the BPM
OSC On: Check if you want the clock to send out osc bpm values
OSC Port 7013: sets the osc port to 7013
OSC Port 8013: sets the osc port to 8013
OSC Port 9013: sets the osc port to 9013
OSC Port 10013: sets the osc port to 10013

D1v1de

SEE ALSO: Str1ke Tempo Management System Documentation

Controls

D1v1de Knob: the clock division
Offset Knob: offset from clock division to also send a trigger out

Inputs

Reset In: Resets counter to beginning
D1v1de In: cv control of division
In: clock in

Outputs

Pos: cv out of counter value
Out: division and offset trigger out

Right Click Context Menu

Change colors in this menu

Pres1t

SEE ALSO: Str1ke Tempo Management System Documentation

left click grid to select blue save cell

right click grid select yellow load cell

Controls

Save Button: saves voltage at 'IN' to cell with the blue square
Load Button: sets voltage at 'OUT' from cell with the yellow square

Inputs

IN: the voltage to store
Save: trigger to save
Load: trigger to load
X (blue): send 0-10v to set position of blue square
Y (blue): send 0-10v to set position of blue square
X (yellow): send 0-10v to set position of yellow square
Y (yellow): send 0-10v to set position of yellow square

Outputs

Out: the current loaded value

Quantizer

Check right click menu for 'Inputs Override Knobs'. This allows direct changes to labels based on voltage input.

Root Knob: root note if scaling pitch sent to "OUT"
Scale Knob: current musical scale or none if turned up all the way to the last value

Bouncy Balls

Basics

The top section contains all the inputs.
The bottom sections contains all the outputs.
The colors of the inputs/outputs correspond to the ball colors.
The top two rows have buttons next to the inputs for manually triggering.
The next three rows have knobs next to the inputs for manually controlling the values.
Click in the dark area to lock/unlock the paddle.
Click the 'ON' button to toggle the paddle visibility.

Inputs

RST: starts ball back at center with initial velocity
TRIG: speeds up ball based on velocity settings
VELX: velocity in the x direction, to the right is positive (towards east), to the left is negative (towards west)
VELY: velocity in the y direction, to the right is positive (towards south), to the left is negative (towards north)
MULT: velocity multiplier

Outputs

X: x position for each ball
Y: y position for each ball
N: (north) trigger out for each ball that hits the top
E: (east) trigger out for each ball that hits the right side
S: (south) trigger out for each ball that hits the bottom
W: (west) trigger out for each ball that hits the left side
EDGE: trigger out for each ball that hits any side
PAD: trigger out for each ball that hits the white pad

Modifying the Output Signal

X Scale Knob: multiplies x output by a value between 0.01 and 1.0
Y Scale Knob: multiplies y output by a value between 0.01 and 1.0
X Offset Knob: +/- 5v added to X Output
Y Offset Knob: +/- 5v added to Y Output

FullScope

Scope in lissajous mode which takes up the full width and height of the module.

Credit goes to Andrew Belt for the Fundamental:Scope code. I just modified that code slightly.

Drag the right side of the module to resize it!

Inputs in top left corner
- X input (same as Fundamental Scope)
- Y input (same as Fundamental Scope)
- Color input
- Rotation input
- Time input
Knobs on left (turn on tooltips)
- X Offset
- Y Offset
- X Scale
- Y Scale
- Rotation
- Time

Right Click Context Menu

Change to the normal scope by unchecking lissajous mode.

Thing Thing

Drag the right side of the module to resize it!

inputs 1 through 4 are +/-5v
5th input and knob are the BALL size uh huh huh :)
6th input and knob zoOM in
pairs well with the angle outputs on Vult Modules Caudal

XY Pad

Video

Draw your own LFO. The recorded path is saved and opened.

Top

Rnd Left Button: will cycle through different types of designs and generate random ones
Rnd Right Button: random variation of the last design will be generated (so click the left button until you find one you like, then click the right button to make a variation of that one.)
X Scale Knob: multiplies x output by a value between 0.01 and 1.0
Y Scale Knob: multiplies y output by a value between 0.01 and 1.0
X Offset Knob: +/- 5v added to X Output
Y Offset Knob: +/- 5v added to Y Output

Bottom

Gate In: plays recorded path while gate is high, retriggers on new gate
Auto: loops playback of the recorded path right after releasing the mouse button
- Or if you just performed a motion while Auto was off, turning it on will play it back
- Or if Auto is on and you want to stop playback, turn Auto off
Speed: plays recorded path from 1x up to 10x faster
Mult: multiplies the current speed by larger amounts
X Output: +/- 5v based on x position
Y Output: +/- 5v based on y position
-X: +/- 5v based on inverted x position (darker crosshairs)
-Y: +/- 5v based on inverted y position (darker crosshairs)
Gate Out: 10v gate out while mouse pressed

Right Click Context Menu

Change the playback mode by right clicking the module and selecting the playback options:

Add5

Adds 5 volts to a signal. Goes well with Vult Caudal.

MinMax

Created to show minimum and maximum voltages in a larger font than the Fundamental Scope

WavHead

Move WavHead up and down based on voltage in.

Works with polyphonic signals.

"This is absolutely the best use of poly cables ever." - Andrew Belt

Right click to:

invert direction
change to bidirectional -5 to +5 volts.
change to snow mode

Tree

Drag the right side of the module to resize it!

Angle Input: angle to rotate each iteration
Angle Knob: angle to rotate each iteration
Length Input: length of first branch
Length Knob: length of first branch
Height Input: height of trunk
Height Knob: height of trunk
Reduce Input: branch reduction
Reduce Knob: branch reduction
Color Input: changes color
Color Knob: changes color
Jitter Input: triggers random numbers to add to rotation
Jitter Button: triggers random numbers to add to rotation

Timer

Change your Cable Colors in V1

  "cableColors": [
    "#ff9709",
    "#fff309",
    "#901afc",
    "#1996fc"
  ]

Other goofy crap

Building

Compile Rack from source, following the instructions at https://github.com/VCVRack/Rack.

Check out JW-Modules into the plugins/ directory

Then run:

make

To make plugin zip:

make dist

Name		Name	Last commit message	Last commit date
Latest commit History 566 Commits
.github		.github
doc		doc
lib/oscpack		lib/oscpack
res		res
src		src
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
Str1ke Tempo Management System.md		Str1ke Tempo Management System.md
TODO.md		TODO.md
all-jw-modules.vcv		all-jw-modules.vcv
buildutil.sh		buildutil.sh
jw-modules-5-4-21.png		jw-modules-5-4-21.png
plugin.json		plugin.json

License

jeremywen/JW-Modules

Folders and files

Latest commit

History

Repository files navigation

JW-Modules

Table of Contents:

SimpleClock

Knobs

Outputs

NoteSeq

Basics

Left

Right

Right Click Context Menu

NoteSeqFu

Basics

Left

Top Right - Merged

Right (Each play head is color coded)

Bottom Right

Right Click Context Menu

NoteSeq16

Basics

Top

Bottom

Right Click Context Menu

Trigs

Basics

Top

Bottom

Patterns

Basics

Top

Bottom

1Pattern

Basics

Top

GridSeq

Basics

Top Direction Inputs

Left

Bottom

Right Click Context Menu

8Seq

Basics

Controls

Inputs

Outputs

Bottom

Right Click Context Menu

DivSeq

Basics

Controls

Inputs

Outputs

Bottom

Right Click Context Menu

AbcdSeq

Basics

Controls

Inputs

Outputs

Bottom

Right Click Context Menu

Str1ker

Controls

Inputs

Outputs

Right Click Context Menu

D1v1de

Controls

Inputs

Outputs

Right Click Context Menu

Pres1t

Controls

Inputs

Outputs

Packages