Merge branch 'main' of github.com:ka9q/ka9q-radio

config/radiod@ka9q-hf.conf

@@ -4,23 +4,25 @@ hardware = rx888
 status = hf.local
 data = hf-pcm.local
 samprate = 12k
+encoding = s16be
 mode = usb
 ttl = 1
 # defaults
 fft-threads = 1
 #blocktime = 20
 #overlap = 5
-#verbose = 1
+verbose = 2
 
 [rx888]
 device = "rx888" # required
 description = "g5rv @ KA9Q"
-gain = 30 # dB max
+gain = 23 # dB
 #gain = 0  # Rb osc test
 #gain = 40 # overrange test
 #samprate = 129m6
 #samprate = 65m536	  # Move CHP on 39.8 away from WWV on 25
 # now on external 27 MHz GPSDO reference
+reference = 27000000.0
 #calibrate = 0
 # rest are defaults
 samprate = 64m8
@@ -39,34 +41,32 @@ samprate = 64m8
 # Bottom of 200 Hz WSPR segments on each band. Center is 1500 Hz higher
 # sample rate must be 12 kHz as required by wsprd
 data = wspr-pcm.local
+samprate = 12k
 encoding = s16be
 mode = usb
 low = 1k3
 high = 1k7
-samprate = 12k
 freq = "1m836600 3m568600 3m592600 5m287200 5m364700 7m038600 10m138700 13m553900 14m095600 18m104600 21m094600 24m924600 28m124600"
 #freq0 = "136k000 474k200 50m293000 144m488500" ; can't get these anyway
 # experiment with fixed gain with 30 or more dB margin
 agc = no
 gain = 60
 
 [WSPR-IQ]
-disable = no
 data = wspr-iq.local
+samprate = 16k
 encoding = s16be
+mode = iq
 agc = 0
 gain = 60
-samprate = 16k
-mode = iq
 freq = "1m836600 3m568600 3m592600 5m287200 5m364700 7m038600 10m138700 13m553900 14m095600 18m104600 21m094600 24m924600 28m124600"
 #freq0 = "136k000 474k200 50m293000 144m488500" ; can't get these anyway
 
 [FT8]
-disable = no
 data = ft8-pcm.local
+samprate = 12k
 encoding = s16be
 mode = usb
-
 # standard 
 freq = "1m840000 3m573000 5m357000 7m074000 10m136000 14m074000 18m100000 21m074000 24m915000 28m074000"
 # "50m313 50m323" # unavailable due to sampling rate
@@ -98,7 +98,7 @@ freq7 = "28m091000"
 
 [FT4]
 data = ft4-pcm.local
-disable = no
+samprate = 12k
 encoding = s16be
 mode = usb
 freq = "3575k000 7047k500 10140k000 14080k000 18104k000 21140k000 24919k000 28180k000"
@@ -107,67 +107,74 @@ freq = "3575k000 7047k500 10140k000 14080k000 18104k000 21140k000 24919k000 2818
 # International beacon project
 [IBP]
 data = ibp-pcm.local
-disable = no
+samprate = 12k
 encoding = s16be
 mode = cwu
 freq = "14m100 18m110 21m150 24m930 28m200"
 
 [60M]
 disable = yes
+data = hf-pcm.local
 encoding = s16be
 # five fixed USB channels on 60 meter segment
 mode = usb
 freq = "5330k500 5346k500 5357k000 5371k500 5403k500"
 
 [10m FM]
 data = fm-pcm.local
-mode = pm
+samprate = 24k
 encoding = s16be
+mode = pm
 freq = "29m50 29m52 29m54 29m56 29m58 29m60 29m62 29m64 29m66 29m68"
 
 [W1AW CW]
 disable = yes
 data = w1aw-pcm.local
-mode = cwu
+samprate = 12k
 encoding = s16be
+mode = cwu
 freq = "1m8025 3m5815 7m0475 14m0475 18m0975 21m0675 28m0675"
 
 [W1AW Digital]
 disable = yes
 data = w1aw-pcm.local
-mode = iq
+samprate = 12k
 encoding = s16be
+mode = iq
 freq = "3m5975 7m095 14m095 18m1025 21m095 28m095"
 
 [W1AW voice]
 disable = yes
 data = w1aw-pcm.local
-mode = lsb
+samprate = 12k
 encoding = s16be
+mode = lsb
 freq = "1m855 3m990 7m290 14m290 18m160 21m390 28m590"
 
 [freedv]
 disable = yes
 data = freedv-pcm.local
-mode = usb
+samprate = 12k
 encoding = s16be
+mode = usb
 freq = "14m236"
 
 [WWV]
 disable = yes
 data = wwv-pcm.local
-mode = am
+samprate = 12k
 encoding = s16be
+mode = am
 freq = "2500k 5000k 10000k 15000k 20000k 25000k 3330k 7850k 14670k" # added CHU
 
 [WWV-IQ]
 disable = no
 data = wwv-iq.local
+samprate = 16k
 encoding = s16be
+mode = iq
 agc = no
 gain = 60
-samprate = 16k
-mode = iq
 freq = "2m500000 5m000000 10m000000 15m000000 20m000000 25m000000 3m330000 7m850000 14m670000"       ### Added the three CHU frequencies
 
 [High Frequency Data Link]
@@ -183,6 +190,7 @@ freq = "2941k 2944k 2992k 2998k 3007k 3016k 3455k 3497k 3900k 4654k 4660k 4681k
 [Citizens Band]
 disable = yes
 data = cb-am-pcm.local
+samprate = 12k
 encoding = s16be
 mode = am
 freq = "26m965 26m975 26m985 27m005 27m015 27m025 27m035 27m055 27m065 27m075 27m085 27m105 27m115 27m125 27m135 27m155 27m165 27m175"
@@ -194,21 +202,24 @@ freq1 = "27m365 27m275 27m385 27m395 27m405"
 [CB LSB channels]
 disable = yes
 data = cb-lsb-pcm.local
+samprate = 12k
 encoding = s16be
 mode = lsb
 freq = "27m355 27m360 27m365 27m370 27m375 27m385 27m395 27m405 27m420 27m425 27m440 27m445 27m455"
 
 [CB USB channels]
 disable = yes
 data = cb-usb-pcm.local
+samprate = 12k
 encoding = s16be
 mode = usb
 freq = "27m355 27m365 27m375 27m385 27m395 27m405"
 
 [California Highway Patrol]
-# Currently running the RX888 at 65 MHz with a 30 MHz LPF, so this is unavailable
+# Currently running the RX888 at 64.8 MHz with a 30 MHz LPF, so this is unavailable
 disable = yes
 data = chp-pcm.local
+samprate = 24k
 encoding = s16be
 mode = pm
 freq = "39m140 39m220 39m240 39m340 39m360 39m400 39m440 39m600 39m720 39m800 39m920 42m340 42m920 45m420"