Exposes a Niko Home Control installation as a compatible HomeKit device.
- A Niko Home Control installation (tested with v1.10 and API v1.19)
- An always-on computer or server on the same network as your NHC installation
- An iOS device running iOS 10
nhc-homekit is published through NPM and can be installed by executing the following in your shell:
npm install -g nhc-homekitNote: If you're installing this on a Linux machine, you'll also need to install avahi and libavahi-compat-libdnssd-dev
You should now be able to run nhc-homekit. Nu further configuration is required!
In order to have nhc-homekit start up automatically when your machine boots, you'll have to add a systemd configuration like the following:
[Unit]
Description=NHC HomeKit Server
After=syslog.target network-online.target
[Service]
Type=simple
ExecStart=/usr/local/bin/nhc-homekit
Restart=on-failure
RestartSec=10
KillMode=process
[Install]
WantedBy=multi-user.target
Open up the Home app on your iOS device as soon as nhc-homekit is running and go to the "Add Accessory" screen. If all goes well you should see a bridge accessory called "Niko Home Control". Add it and enter the pin 031-45-154.
If you're running into trouble adding the bridge, try deleting the persist directory.
If that doesn't solve the problem, try running nhc-homekit with increased verbosity to see info and debug messages. See nhc-homekit --help for details. By default only errors get logged to stderr.
The only NHC actions that are currently supported are those that control lights. I'm working on supporting others, like controlling outlets and motorized applications though!