build.config.msm.common

# The following additional environment variables are considered when build.config.msm.common is
# included:
#
#   DT_OVERLAY_SUPPORT
#     If set, then create a dtbo.img
#   BUILD_VENDOR_DLKM
#     If set, then enables creation of vendor_dlkm.img using all modules
#     not part of the first-stage ramdisk
#   EXTRA_CONFIGS
#     All files in this list are sourced

CONFIG_DIR=arch/${ARCH}/configs

BRANCH=msm-waipio
if [ -z $CONFIG_TARGET ]; then
	CONFIG_TARGET=msm.${MSM_ARCH}
fi

################################################################################
##
function compile_external_dtc() {
  (
    OUT_DIR=${COMMON_OUT_DIR}/external/dtc
    [ "${SKIP_MRPROPER}" != "1" ] && rm -rf ${OUT_DIR}
    cd ${ROOT_DIR}/external/dtc
    DTC_MAKE_ARGS=("CC=${HOSTCC}" "AR=${AR}")
    DTC_MAKE_ARGS+=("LDFLAGS=${HOSTLDFLAGS} -fuse-ld=${LD##*.} --rtlib=compiler-rt")
    DTC_MAKE_ARGS+=("EXTRA_CFLAGS=${HOSTCFLAGS}")
    # PKG_CONFIG would pull from host environment to determine if libyaml and libpython are
    # available. We want a hermetic build that doesn't rely on host tools, so make dtc build think
    #  none of these libraries are installed.
    DTC_MAKE_ARGS+=("PKG_CONFIG=false")
    make all install "${DTC_MAKE_ARGS[@]}" NO_PYTHON=1 PREFIX=${COMMON_OUT_DIR}/host
  )
}
append_cmd PRE_DEFCONFIG_CMDS 'compile_external_dtc'

################################################################################
## DTB general support
DTB_DIR=vendor/qcom

MAKE_GOALS+=" dtbs"

function clean_dtbs() {
  rm -rf ${OUT_DIR}/arch/${ARCH}/boot/dts/${DTB_DIR}/*
}
append_cmd POST_DEFCONFIG_CMDS 'clean_dtbs'

FILES+="
arch/${ARCH}/boot/dts/${DTB_DIR}/*.dtb*
.config
Module.symvers
"

################################################################################
## DT Overlay
DTC_OVERLAY_TEST_EXT=ufdt_apply_overlay

function add_dt_overlay_defconfig() {
  OEM_CONFIG=${TARGET_PRODUCT}.config
  ${KERNEL_DIR}/scripts/config --file ${OUT_DIR}/.config \
    -e BUILD_ARM64_DT_OVERLAY
  if [ -e ${KERNEL_DIR}/arch/arm64/configs/oem/${OEM_CONFIG} ]; then
    echo "Overriding kernel config with oem config ${OEM_CONFIG}"
    cat ${KERNEL_DIR}/arch/arm64/configs/oem/${OEM_CONFIG} >> ${OUT_DIR}/.config
    if [ "$LCT_BUILD_TYPE" = "FACTORY" ]; then
      cat ${KERNEL_DIR}/arch/arm64/configs/oem/asphalt_fac.config >> ${OUT_DIR}/.config
    fi
  fi
  (cd ${KERNEL_DIR} && make "${TOOL_ARGS[@]}" O=${OUT_DIR} "${MAKE_ARGS[@]}" olddefconfig)
}
if [ ! -z $DT_OVERLAY_SUPPORT ] && [ ! $DT_OVERLAY_SUPPORT -eq "0" ]; then
  append_cmd POST_DEFCONFIG_CMDS 'add_dt_overlay_defconfig'
fi

################################################################################
## Variant Selection
if [ -z "${VARIANT}" ] || [ "${VARIANT}" == "default" ]; then
  VARIANT="${VARIANTS[0]}"
fi

if [ ! -z $MSM_ARCH ]; then
  BRANCH+=-${MSM_ARCH}
fi

if [ ! -z $VARIANT ]; then
  BRANCH+=-${VARIANT}
fi

if ( for v in "${VARIANTS[@]}"; do if [ "${v}" = "${VARIANT}" ]; then exit 1; fi; done; exit 0 ) ; then
  echo "Unsupported variant '${VARIANT}'"
  exit 1
fi

################################################################################
## defconfigs

# Helper function to let build.config files merge config fragments
# Usage: append_cmd PRE_DEFCONFIG_CMDS 'merge_defconfig_fragment ${DEFCONFIG} ${fragment_config}'
DEFCONFIG_FRAGMENTS=""
function merge_defconfig_fragments() {
  if ( [ -z "${DEFCONFIG_FRAGMENTS}" ] ||
     [ "${DEFCONFIG_FRAGMENTS}" = "${DEFCONFIG}" ] ); then
    echo "No defconfig fragments for ${DEFCONFIG}"
    return
  fi
  local output=$(mktemp)
  KCONFIG_CONFIG=${KERNEL_DIR}/arch/${ARCH}/configs/${DEFCONFIG} \
    ${KERNEL_DIR}/scripts/kconfig/merge_config.sh \
    -m -r -y ${DEFCONFIG_FRAGMENTS} | tee $output
  set +x
  if grep -q -E -e "Previous value: [^=]+=[ym]" $output; then
    echo "========================================================"
    echo "ERROR! Detected overridden config!"
    grep -C 1 -E -e "Previous value: [^=]+=[ym]" $output >&2
    rm $output
    exit 1
  fi
  local temp_config=$(mktemp)
  (cd ${KERNEL_DIR} && KCONFIG_CONFIG=${temp_config} make "${TOOL_ARGS[@]}" O=${OUT_DIR} "${MAKE_ARGS[@]}" ${DEFCONFIG}) 2>&1 | tee $output
  if grep -q -e "warning:" $output; then
    echo "========================================================"
    echo "ERROR! Treating config warnings as errors"
    grep -e "warning" $output >&2
    rm $output $temp_config
    exit 1
  fi
  rm $output $temp_config
  set -x

}
append_cmd PRE_DEFCONFIG_CMDS "merge_defconfig_fragments"

function check_merged_defconfig() {
  if ( [ -z "${DEFCONFIG_FRAGMENTS}" ] ||
     [ "${DEFCONFIG_FRAGMENTS}" = "${DEFCONFIG}" ] ); then
    return
  fi
  local output=$(mktemp)
  ${KERNEL_DIR}/scripts/diffconfig "${KERNEL_DIR}/arch/${ARCH}/configs/${DEFCONFIG}" ${OUT_DIR}/.config > $output
  set +x
  # Allow CONFIG_CMDLINE changes
  if grep -q -v -E -e "^\+" -e "^CMDLINE " $output; then
    echo "========================================================"
    echo "ERROR! Defconfig fragment did not apply as expected"
    grep -v -E -e "^\+" -e "^CMDLINE " $output
    rm $output
    exit 1
  fi
  rm $output
  set -x
}
append_cmd POST_DEFCONFIG_CMDS "check_merged_defconfig"

# Wrapper function around merge_defconfig_fragment to reduce repeated logic
# Usage: apply_defconfig_fragment ${KERNEL_DIR}/cuttlefish.fragment cuttlefish-gki_defconfig
function apply_defconfig_fragment() {
  FRAGMENT_CONFIG=$1
  if [ -z "${DEFCONFIG_FRAGMENTS}" ]; then
    DEFCONFIG_FRAGMENTS="${KERNEL_DIR}/arch/${ARCH}/configs/${DEFCONFIG}"
  fi
  DEFCONFIG_FRAGMENTS="${DEFCONFIG_FRAGMENTS} $1"
  DEFCONFIG="${2:-${DEFCONFIG}}"
}

################################################################################
## DLKMs
if [ -e "${KERNEL_DIR}/modules.list.${CONFIG_TARGET}" ]; then
  MODULES_LIST=${KERNEL_DIR}/modules.list.${CONFIG_TARGET}
fi
if [ -e "${KERNEL_DIR}/modules.blocklist.${CONFIG_TARGET}" ]; then
  MODULES_BLOCKLIST="${KERNEL_DIR}/modules.blocklist.${CONFIG_TARGET}"
  VENDOR_DLKM_MODULES_BLOCKLIST="${KERNEL_DIR}/modules.blocklist.${CONFIG_TARGET}"
fi

function prepare_vendor_dlkm() {
  if [ -z "${VENDOR_DLKM_MODULES_LIST}" ]; then
    local module_list_flag=
    if [ -e "${MODULES_LIST}" ]; then
      module_list_flag="-f ${MODULES_LIST}"
    else
      module_list_flag="-e ''"
    fi
    (cd "${MODULES_STAGING_DIR}/lib/modules/" && find -type f -name "*.ko" -printf "%f\n") | \
      grep -w -v ${module_list_flag} - > ${MODULES_STAGING_DIR}/vendor_dlkm.modules.load

    VENDOR_DLKM_MODULES_LIST="${MODULES_STAGING_DIR}/vendor_dlkm.modules.load"
  fi

  SUPER_IMAGE_CONTENTS+="${DIST_DIR}/vendor_dlkm.img"
}
if [ "${BUILD_VENDOR_DLKM}" == "1" ]; then
  append_cmd DIST_CMDS 'prepare_vendor_dlkm'
  if [ -e "${KERNEL_DIR}/modules.vendor_blocklist.${CONFIG_TARGET}" ]; then
    VENDOR_DLKM_MODULES_BLOCKLIST="${KERNEL_DIR}/modules.vendor_blocklist.${CONFIG_TARGET}"
  fi
fi

KERNEL_BINARY=Image

################################################################################
## DT Overlay
LIBUFDT_PREBUILTS_BIN=tools/libufdt/utils/src
function make_dtbo_img() {
  mkdir -p ${DIST_DIR}/
  mkdtboimg.py create ${DIST_DIR}/dtbo.img --page_size=${PAGE_SIZE} ${DIST_DIR}/*.dtbo
}
if [ ! -z $DT_OVERLAY_SUPPORT ] && [ ! $DT_OVERLAY_SUPPORT -eq "0" ]; then
  append_cmd DIST_CMDS 'make_dtbo_img'
fi

################################################################################
## Cating all the DTBs and create a dtb.img
function make_dtb_img() {
  mkdir -p ${DIST_DIR}/
  mkdtboimg.py create ${DIST_DIR}/${MSM_ARCH}-dtb.img --page_size=${PAGE_SIZE} ${DIST_DIR}/*.dtb
}
if [ ! -z $DTB_IMG_CREATE ] && [ ! $DTB_IMG_CREATE -eq "0" ]; then
  append_cmd DIST_CMDS 'make_dtb_img'
fi

################################################################################
## Miscellaneous
if [ -n "${EXTRA_CONFIGS}" ]; then
  for extra_config in "${EXTRA_CONFIGS}"
  do
    . ${extra_config}
  done
fi

################################################################################
## Copy prebuilt files to ${COMMON_OUT_DIR}/host/bin to be used by CI tools
DIST_BINS="""
build/android/merge_dtbs.py
build/build-tools/path/linux-x86/ufdt_apply_overlay
"""
function copy_dist_bins() (
  set +x
  set -e
  mkdir -p ${COMMON_OUT_DIR}/host/bin
  echo "Copying binaries to host/bin"
  for FILE in $(ls -1 ${DIST_BINS}); do
    if [ -f ${ROOT_DIR}/${FILE} ]; then
      echo "  $FILE"
      cp -p ${ROOT_DIR}/${FILE} ${COMMON_OUT_DIR}/host/bin/
    else
      echo "  $FILE is not a file, skipping"
    fi
  done
)
append_cmd DIST_CMDS 'copy_dist_bins'