Skip to content

kobayurii/near-lake-indexer

 
 

Repository files navigation

near-lake-indexer

NEAR Lake is an indexer built on top of NEAR Indexer microframework to watch the network and store all the events as JSON files on AWS S3.

Concept

We used to have NEAR Indexer for Explorer that was watching for the network and stored all the events to PostgreSQL database. PostgreSQL became the main bottleneck for us. After some brainstorming sessions and researches we decided to go with AWS Aurora database.

Knowing the fact that NEAR Explorer is not the only project that uses the Indexer for Explorer's database, we wanted to come up with the concept that will allow us to cover even more projects that can benefit from the data from NEAR Protocol.

That's why we decided to store the data from the blockchain as JSON files on AWS S3 bucket that can be used as a data source for different projects.

As "Indexer for Explorer Remake" project we are going to have near-lake as a data writer. There's going to be another project that will read from AWS S3 bucket and will store all the data in SingleStore database. This will replace NEAR Indexer for Explorer PostgreSQL database at some moment and will become the main source for NEAR Explorer.

How to start

The final setup consists of the following components:

  • AWS S3 Bucket as a storage
  • NEAR Lake binary that operates as a regular NEAR Protocol peer-to-peer node, so you will operate it as any other Regular/RPC Node in NEAR

Prepare Development Environment

Before you proceed, make sure you have the following software installed:

  • Rust compiler of the version that is mentioned in rust-toolchain file in the root of nearcore project.

  • Ensure you have AWS Credentials configured From AWS Docs:

    For example, the files generated by the AWS CLI for a default profile configured with aws configure looks similar to the following.

    ~/.aws/credentials

    [default]
    aws_access_key_id=AKIAIOSFODNN7EXAMPLE
    aws_secret_access_key=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY
    

Compile NEAR Lake

$ cargo build --release

Configure NEAR Lake

To connect NEAR Lake to the specific chain you need to have necessary configs, you can generate it as follows:

$ ./target/release/near-lake --home ~/.near/testnet init --chain-id testnet --download-config --download-genesis

The above code will download the official genesis config and generate necessary configs. You can replace testnet in the command above to different network ID (mainnet).

NB! According to changes in nearcore config generation we don't fill all the necessary fields in the config file. While this issue is open near/nearcore#3156 you need to download config you want and replace the generated one manually.

Configs for the specified network are in the --home provided folder. The configuration in the config.json file ensures that NEAR Lake follows all the necessary shards, so "tracked_shards" parameters in ~/.near/testnet/config.json is configured as follows: (nearcore treats empty value for "tracked_shards" as "do not track any shard" and any value as "track all shards".)

...
"tracked_shards": [0],
...

(Optional) Configuration via environment variables

You can also configure NEAR Lake via environment variables. This is useful if you want to run NEAR Lake in a Docker container.

Add .env file to the root of the project with the following content:

BUCKET=near-lake-custom # name of the bucket to store data in (e.g. near-lake-data-testnet or near-lake-data-mainnet)
REGION=eu-central-1
AWS_DEFAULT_REGION=eu-central-1
AWS_ACCESS_KEY_ID=AKIAIOSFODNN7EXAMPLE # either via env or via ~/.aws
AWS_SECRET_ACCESS_KEY=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY # either via env or via ~/.aws
ENDPOINT=http://localhost:4566 # for the custom S3 storage endpoing (e.g. Minio or Localstack)

Or you can pass them via command line (see below)

Run NEAR Lake

Commands to run NEAR Lake, after ./target/release/near-lake

Command Key/Subcommand Required/Default Responsible for
--home Default
~/.near
Tells the node where too look for necessary files:
config.json
,
genesis.json
,
node_key.json
, and
data
folder
init Tells the node to generate config files in --home-dir
--chain-id Required

* localnet
* testnet
* mainnet
Defines the chain to generate config files for
--download-config Optional If provided tells the node to download config.json from the public URL. You can download them manually

- testnet config.json
- mainnet config.json
--download-genesis Optional If provided tells the node to download genesis.json from the public URL. You can download them manually

- testnet genesis.json
- mainnet genesis.json
TODO:
Other neard keys
run Runs the node
--bucket Required AWS S3 Bucket name
--region Required AWS S3 Bucket region
--fallback-region Default eu-central-1 AWS S3 Fallback region
--endpoint Optional AWS S3 compatible API endpoint
--stream-while-syncing Optional If provided Indexer streams blocks while they appear on the node instead of waiting the node to be fully synced
--concurrency Default 1 Defines the concurrency for the process of saving block data to AWS S3
sync-from-latest One of the sync- subcommands is required Tells the node to start indexing from the latest block in the network
sync-from-interruption One of the sync- subcommands is required Tells the node to start indexing from the block the node was interrupted on (if it is a first start it will fallback to sync-from-latest)
sync-from-block --height N One of the
sync-
subcommands is required
Tells the node to start indexing from the specified block height N (Ensure you node data has the block you want to start from)
$ ./target/release/near-lake --home ~/.near/testnet run --stream-while-syncing --concurrency 50 sync-from-latest

After the network is synced, you should see logs of every block height currently received by NEAR Lake.

Syncing

Whenever you run NEAR Lake for any network except localnet you'll need to sync with the network. This is required because it's a natural behavior of nearcore node and NEAR Lake is a wrapper for the regular nearcore node. In order to work and index the data your node must be synced with the network. This process can take a while, so we suggest to download a fresh backup of the data folder and put it in you --home-dir of your choice (by default it is ~/.near)

Running your NEAR Lake node on top of a backup data will reduce the time of syncing process because your node will download only the data after the backup was cut and it takes reasonable amount time.

All the backups can be downloaded from the public S3 bucket which contains latest daily snapshots:

You will need AWS CLI to be installed in order to download the backups.

Mainnet

$ aws s3 --no-sign-request cp s3://near-protocol-public/backups/mainnet/rpc/latest .
$ LATEST=$(cat latest)
$ aws s3 --no-sign-request cp --no-sign-request --recursive s3://near-protocol-public/backups/mainnet/rpc/$LATEST ~/.near/data

Testnet

$ aws s3 --no-sign-request cp s3://near-protocol-public/backups/testnet/rpc/latest .
$ LATEST=$(cat latest)
$ aws s3 --no-sign-request cp --no-sign-request --recursive s3://near-protocol-public/backups/testnet/rpc/$LATEST ~/.near/data

Running NEAR Lake as an archival node

It's not necessary but in order to index everything in the network it is better to do it from the genesis. nearcore node is running in non-archival mode by default. That means that the node keeps data only for 5 last epochs. In order to index data from the genesis we need to turn the node in archival mode.

To do it we need to update config.json located in --home-dir (by default it is ~/.near).

Find next keys in the config and update them as following:

{
  ...
  "archive": true,
  "tracked_shards": [0],
  ...
}

The syncing process in archival mode can take a lot of time, so it's better to download a backup provided by NEAR and put it in your data folder. After that your node will download only the data after the backup was cut and it takes reasonable amount time.

All the backups can be downloaded from the public S3 bucket which contains the latest daily snapshots:

See this link for reference

Using the data

We write all the data to AWS S3 buckets:

  • near-lake-data-testnet (eu-central-1 region) for testnet
  • near-lake-data-mainnet (eu-central-1 region) for mainnet

Custom S3 storage

In case you want to run you own near-lake instance and store data in some S3 compatible storage (Minio or Localstack as example) You can owerride default S3 API endpoint by using --endpoint option

  • run minio
$ mkdir -p /data/near-lake-custom && minio server /data
  • run near-lake
$ ./target/release/near-lake --home ~/.near/testnet run --endpoint http://127.0.0.1:9000 --bucket near-lake-custom sync-from-latest

Data structure

The data structure we use is the following:

<block_height>/
  block.json
  shard_0.json
  shard_1.json
  ...
  shard_N.json
  • <block_height> is a 12-character-long u64 string with leading zeros (e.g 000042839521). See this issue for a reasoning
  • block_json contains JSON-serialized BlockView struct. NB! this struct might change in the future, we will announce it
  • shard_N.json where N is u64 starting from 0. Represents the index number of the shard. In order to find out the expected number of shards in the block you can look in block.json at .header.chunks_included

Access the data

All NEAR Lake AWS S3 buckets have Request Payer enabled. It means that anyone with their own AWS credentials can List and Read the bucket's content and be charged for it by AWS. Connections to the bucket have to be done with AWS credentials provided. See NEAR Lake Framework for a reference.

NEAR Lake Framework

Once we set up the public access to the buckets anyone will be able to build their own code to read it through.

For our own needs we are working on NEAR Lake Framework to have a simple way to create an indexer on top of the data stored by NEAR Lake itself.

See the official announce of NEAR Lake Framework on the NEAR Gov Forum

Common Errors & Solutions

If you don't have any peer

Here is a script that asks the RPC node about its peers and makes a list of boot nodes for you:

--boot-nodes `curl -X POST https://rpc.mainnet.near.org \
  -H "Content-Type: application/json" \
  -d '{
        "jsonrpc": "2.0",
        "method": "network_info",
        "params": [],
        "id": "dontcare"
      }' | \
jq '.result.active_peers as $list1 | .result.known_producers as $list2 |
$list1[] as $active_peer | $list2[] |
select(.peer_id == $active_peer.id) |
"\(.peer_id)@\($active_peer.addr)"' |\
awk 'NR>2 {print ","} length($0) {print p} {p=$0}' ORS="" | sed 's/"//g'

About

ETL Indexer implementation

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Rust 90.6%
  • Shell 6.5%
  • Dockerfile 2.9%