Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Reword "master" to "control plane" #596

Closed

Conversation

JamesLaverack
Copy link

In most cases this is a direct replacement, but some sections have been slightly changed to reflect if the section is discussing control plane nodes (i.e., nodes that run control plane components) or the control plane components themselves.

In most cases this is a direct replacement, but some sections have been
slightly changed to reflect if the section is discussing control plane
nodes (i.e., nodes that run control plane components) or the control
plane components themselves.
@k8s-ci-robot
Copy link
Contributor

Adding the "do-not-merge/release-note-label-needed" label because no release-note block was detected, please follow our release note process to remove it.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.

@k8s-ci-robot k8s-ci-robot added do-not-merge/release-note-label-needed Indicates that a PR should not merge because it's missing one of the release note labels. cncf-cla: yes Indicates the PR's author has signed the CNCF CLA. labels May 26, 2024
@k8s-ci-robot
Copy link
Contributor

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by: JamesLaverack
Once this PR has been reviewed and has the lgtm label, please assign saad-ali for approval. For more information see the Kubernetes Code Review Process.

The full list of commands accepted by this bot can be found here.

Needs approval from an approver in each of these files:

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

@k8s-ci-robot
Copy link
Contributor

Welcome @JamesLaverack!

It looks like this is your first PR to kubernetes-csi/docs 🎉. Please refer to our pull request process documentation to help your PR have a smooth ride to approval.

You will be prompted by a bot to use commands during the review process. Do not be afraid to follow the prompts! It is okay to experiment. Here is the bot commands documentation.

You can also check if kubernetes-csi/docs has its own contribution guidelines.

You may want to refer to our testing guide if you run into trouble with your tests not passing.

If you are having difficulty getting your pull request seen, please follow the recommended escalation practices. Also, for tips and tricks in the contribution process you may want to read the Kubernetes contributor cheat sheet. We want to make sure your contribution gets all the attention it needs!

Thank you, and welcome to Kubernetes. 😃

@k8s-ci-robot k8s-ci-robot added the size/S Denotes a PR that changes 10-29 lines, ignoring generated files. label May 26, 2024
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough contributors to adequately respond to all PRs.

This bot triages PRs according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the PR is closed

You can:

  • Mark this PR as fresh with /remove-lifecycle stale
  • Close this PR with /close
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

@k8s-ci-robot k8s-ci-robot added the lifecycle/stale Denotes an issue or PR has remained open with no activity and has become stale. label Aug 24, 2024
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough active contributors to adequately respond to all PRs.

This bot triages PRs according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the PR is closed

You can:

  • Mark this PR as fresh with /remove-lifecycle rotten
  • Close this PR with /close
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

@k8s-ci-robot k8s-ci-robot added lifecycle/rotten Denotes an issue or PR that has aged beyond stale and will be auto-closed. and removed lifecycle/stale Denotes an issue or PR has remained open with no activity and has become stale. labels Sep 23, 2024
@k8s-triage-robot
Copy link

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages PRs according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the PR is closed

You can:

  • Reopen this PR with /reopen
  • Mark this PR as fresh with /remove-lifecycle rotten
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

@k8s-ci-robot
Copy link
Contributor

@k8s-triage-robot: Closed this PR.

In response to this:

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages PRs according to the following rules:

  • After 90d of inactivity, lifecycle/stale is applied
  • After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
  • After 30d of inactivity since lifecycle/rotten was applied, the PR is closed

You can:

  • Reopen this PR with /reopen
  • Mark this PR as fresh with /remove-lifecycle rotten
  • Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
cncf-cla: yes Indicates the PR's author has signed the CNCF CLA. do-not-merge/release-note-label-needed Indicates that a PR should not merge because it's missing one of the release note labels. lifecycle/rotten Denotes an issue or PR that has aged beyond stale and will be auto-closed. size/S Denotes a PR that changes 10-29 lines, ignoring generated files.
Projects
None yet
Development

Successfully merging this pull request may close these issues.

3 participants