Specs
ZYTEC 385W SGI P/N:060-0021-001 REV C
+5.0V/40.0A
+3.5V/48.0A
+3.5V/12.0A
+12.0V/4.25A
-12.0V/0.5A
-5.0V/0.8A
+5.0V AUX/0.1A
Capacitor list
Include what type of capacitors I use.
HV board capacitor list
1uF 50v x1 Rubycon YXF
10uF 35v x1 ELNA RJJ
47uF 35v x1 ELNA RJB
100uF 25v x1 Panasonic FC, 100uF 35v
330uF 35v x1 Nippon Chemi-Con LXZ
470uF 35v x2 Nichicon HW
1800uF 200v x2 original one is Marcon DUF series, didn't change
Note:
- I usually didn't change bulk caps if it measure to be okey.
- Capacitors on HV board can use 105°C general purpose, but preferably long life type.
LV board capacitor list
47uF 25v x1 ELNA RJF
47uF 35v x2 ELNA RJB
330uF 6.3v x3 original one is Marcon CFM series (polymer capacitor), didn't change
470uF 35v x2 Nichicon HW
2200uF 16v x1 Nippon Chemi-Con KZE
3300uF 10v x1 SAMXON GK (pulled from broken Dell or HP PSU lol), will change to Chemi-Con KZE at later date
3300uF 16v x1 ELNA RJH, 3300uF 16v the pin width is too narrow but was able to fit.
Use 3900uF or Nichicon PW or Panasonic FC for 16mm width, which will fit the PCB hole.
6800uF 6.3v x6 Nichicon PM (Prefer PW series as it is longer life version)
PSU fan is Panaflo FBA09A12V