| Script name | Description |
|---|---|
| GitHub Script Downloader | Downloads python scripts located on this page directly to your switch. |
| Automatic Backup | Runs automated back up on all scripts, including configuration, policy and scripts. |
| Clean Switch | Provides a method of deleting all configuration parameters and files from an EXOS switch. |
| Config Diff | Script to compare the current running config with the last saved configuration |
| dhcp43 | Script to generate option 43 configuration to use with EXOS ZTP |
| EAPS Checker | This script will check eaps config and status from a PC/Server. |
| EDP and port VLAN Diff | This Script uses EDP to check if the local and remote port have the same vlans added to the ports. |
| Enable Features Check | Identifies the features enabled on a switch |
| Email event | This EXOS script will send an email when an event is logged |
| FDB OUI | Scans the FDB table and reports the vendor of the device connected. |
| Flow Tracker | Creates a dynamic ACL to count packets. |
| IOS to Policy | IOS ACL to EXOS policy converter. |
| LAGutil | Shows the combined utilization for all ports in each loadshare/LAG. |
| Show LAG | Shows statistics, rxerrors, txerrors, utilization for loadshare/LAGs. |
| List_Compress | This script takes a string of numerical values and compresses them into a string of condensed ranges. |
| MIB View | Converts a MIB view defined with asterisks to the mask notation used in EXOS configuration. |
| MLAG config check | Checks to ensure that all VLANs on MLAG ports are also present on the ISC. |
| MLAG config compare | Check your MLAG config by comparing this script output from both MLAG peers. |
| NON-stacking config converter | Converts a non stacking configuration to a stacking configuration. |
| Convert Port Config | Allows you the option to translate a slot:port style config to standard port notation or to change port configs per slot. |
| QOS Config Wizard | Wizard to aid in creating QoS profiles |
| Port Statistics Ssummary | Display a consolidated port statistics table |
| Radius mgmt config | Wizard for configuring an ExtremeXOS(TM) switch with RADIUS management information. |
| Radius NetLogin config | Wizard for configuring an ExtremeXOS(TM) switch for RADIUS netlogin. |
| show config clean | Hides unused config sections from the output of "show configuration" |
| Show vlanID | Shows EXOS VLANs in VID order |
| SNMPassist | Wizard for deleting and configuring SNMPv3 for an ExtremeXOS(TM) switch. |
| SNMP v1v2 config | Wizard for SNMP V1/V2 configuration for an ExtremeXOS(TM) switch. |
| SNTP config | Example for Simple Network Time Protocol (SNTP) configuration for an ExtremeXOS(TM) switch. |
| Show port vid | This script displays the VLAN assignment and tagging configuration for all ports on the switch. |
| VLAN ELRP Check | This script will run ELRP on all VLANS on an EXOS switch running 15.6 and newer. |
| Vlan Existence Checker | Reads VID and VLAN-Name as key-value-pairs from /usr/local/cfg/vlan_list.csv (delimiter: ";") and checks the Switch for existence of those VLANs. |
| VLAN Copy Port | This EXOS script will copy/move vlans from one port to another. |
| Watch Command | Simple script that repeats a CLI command every n seconds |
| JSONRPC CLI Example | This python script is an example of how to interface with EXOS 21.1 using JSONRPC over HTTP/HTTPS. |
| Remote Script Example | This python script is an example of how run scripts remotely on EXOS switches running 21.1 or later over HTTP/HTTPS. |
| EXOS Snmp DatetimeAPI | Python API that can converts EXOS last config change time to python datetime format. |
| Fabric Attach Zero Touch Client | This script implements the ERS and VSP FA ZTC functionality on XOS |
| ZTP Convert to Fabric Engine | Boot universal hardware out of the box directly into VOSS as Fabric Engine |
This .lst file includes all of the switch .py scripts at the time of the file upload. It can be downloaded directly to the switch with the download url <url> <vr> command. The .lst will create a folder called gtac and add all the scripts into that folder. Note: To run the scripts you need to cd into the gtac folder.