Skip to content

litex-hub/linux-on-litex-rocket

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

42 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Linux on LiteX with a RV64GC RocketChip CPU

This repository demonstrates the capability to run 64-bit Linux on a SoC built with LiteX and RocketChip.

Prerequisites:

  1. Miscellaneous supporting packages, including HDL compiler toolchains, most likely available from the repositories of your Linux distribution; e.g., on Fedora(40):

    sudo dnf install openocd dtc expat-devel fakeroot perl-bignum json-c-devel \
         meson verilator python3-devel python3-setuptools python3-migen \
         python3-pyserial libevent-devel libmpc-devel mpfr-devel \
         yosys trellis nextpnr
    

    Some (non-Fedora) Linux distributions may not have packaged versions of some of the prerequisites (e.g., python3-migen, yosys, trellis, and nextpnr), so YMMV.

  2. Unpackaged components, including the sources to LiteX and software items:

    NOTE: use the included download_components.sh script to download and install all listed components.

    • GCC cross-compiler toolchain for 64-bit RISC-V. The script downloads a pre-built copy of the toolchain. To build it yourself from sources, follow these steps:

      git clone --recursive https://github.com/riscv/riscv-gnu-toolchain
      pushd riscv-gnu-toolchain
      ./configure --prefix=$HOME/RISCV --enable-multilib
      make newlib linux
      popd
      

      Note that the above process may take several hours to complete. Be sure to add $HOME/RISCV/bin to your $PATH variable.

    • LiteX (Python) repositories

    • Linux kernel with LiteX specific out-of-tree drivers

    • OpenSBI firmware

    • Busybox userspace software

    You may download a VirtualBox pre-built VM (username: user, password: tartans), containing all pre-installed components with versions (or git commits) tested to build correctly.

  3. For Xilinx based FPGA boards, you should also install Vivado (2022.2 is known to work with this repository). Installing and configuring Vivado is out of scope for this document, but instructions should be readily available on the Internet.

Pre-built Binaries: bitstream, boot images:

Pre-built binaries for the targets described below are available for download here

Building the Linux kernel and initrd userspace image:

NOTE: use the included build_software.sh script to build the universal (kernel and userspace) software components.

Both the Linux kernel and initial ram disk image (which, in turn, is based on the Busybox binary) are independent of the underlying "hardware" (i.e., gateware) configuration. They are the same whether we configure a single or multiple RocketChip core(s), whether the FPGA board is using a Lattice or Xilinx chip, or which peripherals (ethernet, sdcard, sata, etc.) are present in the design.

Building the Gateware (FPGA Bitstream):

Building bitstream for lambdaconcept_ecpix5 (Lattice ECP5 85k):

cd ~/LITEX
litex-boards/litex_boards/targets/lambdaconcept_ecpix5.py --build \
    --cpu-type rocket --cpu-variant linux --cpu-num-cores 1 --cpu-mem-width 2 \
    --sys-clk-freq 50e6 --with-ethernet --with-sdcard \
    --yosys-flow3 --nextpnr-seed $RANDOM

The resulting bitstream can be sent to the board using the following command:

openocd -f litex-boards/litex_boards/prog/openocd_ecpix5.cfg \
  -c 'transport select jtag; init; \
      svf build/lambdaconcept_ecpix5/gateware/lambdaconcept_ecpix5.svf; \
      exit'

Building bitstream for digilent_nexys_video (Xilinx Artix-7 XC7A200T):

cd ~/LITEX
litex-boards/litex_boards/targets/digilent_nexys_video.py --build \
    --cpu-type rocket --cpu-variant linux --cpu-num-cores 4 --cpu-mem-width 2 \
    --sys-clk-freq 50e6 --with-ethernet --with-sdcard --with-sata --sata-gen 1

The resulting bitstream can be sent to the board using the following command:

openocd -f litex-boards/litex_boards/prog/openocd_nexys_video.cfg \
  -c 'transport select jtag; init; \
      pld load 0 build/digilent_nexys_video/gateware/digilent_nexys_video.bit; \
      exit'

Building bitstream for litex_acorn_baseboard_mini (Xilinx Artix-7 XC7A200T):

cd ~/LITEX
litex-boards/litex_boards/targets/litex_acorn_baseboard_mini.py --build \
    --cpu-type rocket --cpu-variant linux --cpu-num-cores 4 --cpu-mem-width 2 \
    --sys-clk-freq 75e6 --with-ethernet --with-sata

The resulting bitstream can be sent to the board using the following command:

openocd -f litex-boards/litex_boards/prog/openocd_xc7_ft2232.cfg \
 -c 'transport select jtag; init; \
  pld load build/litex_acorn_baseboard_mini/gateware/litex_acorn_baseboard_mini.bit; \
  exit'

A word on the --cpu-mem-width argument

Depending on each specific FPGA board, the LiteDRAM memory controller exposes a port of a width (in bits) of either 64(1), 128(2), 256(4), or 512(8). In order to avoid relying on LiteX to perform a width conversion between the Rocket CPU and LiteDRAM, we need to select a pre-compiled Rocket model of the appropriate width. When applying these instructions to a new (unlisted) FPGA board, look for output that looks like this:

...
Converting MemBus(...) data width to LiteDRAM(...)
...

and adjust the --cpu-mem-width value in your build command line accordingly.

Building the OpenSBI Firmware:

DT (Device Tree) file specific to your design/bitstream:

The included *.dts files (in the conf folder) were manually assembled by combining core-specific parameters from the sample *.dts files provided in pythondata-cpu-rocket with register address data collected during bitstream generation, stored in the resulting csr.csv and csr.json files found in ~/LITEX/build/<board-name>/.

Note that interrupt numbers contained in csr.* must be incremented by 1 in the *.dts file in order to match the way RocketChip keeps track of its external IRQ lines. Running csr.json through litex_json2dts_linux.py might also help inform this process.

Additionally, information about the size of the initrd image (initrd_bb) is also (loosely) captured in the *.dts file.

We use lambdaconcept_ecpix5.dts to illustrate the process of building the OpenSBI firmware blob (fw_jump.bin):

dtc -O dtb ~/linux-on-litex-rocket/conf/lambdaconcept_ecpix5.dts \
    -o /tmp/lambdaconcept_ecpix5.dtb

Building the firmware blob:

We now build the OpenSBI firmware blob (fw_jump.bin) with a built-in device tree binary blob (*.dtb) corresponding to our specific bitstream:

cd ~/opensbi
make CROSS_COMPILE=riscv64-unknown-linux-gnu- PLATFORM=generic \
     FW_FDT_PATH=/tmp/lambdaconcept_ecpix5.dtb \
     FW_JUMP_FDT_ADDR=0x82400000

The resulting blob will become available as ~/opensbi/build/platform/generic/firmware/fw_jump.bin.

Starting Linux on Litex+Rocket:

Assembling the boot media:

On either the first, FAT16-formatted partition of an SD card, or in the top-level directory of your TFTP server (typically /var/lib/tftpboot), collect the following three files:

  • Image: Linux kernel, from ~/linux/arch/riscv/boot/Image
  • initrd_bb: initial ram disk image, from ~/initrd_bb
  • fw_jump.bin: OpenSBI firmware with built-in bitstream-specific DT, from ~/opensbi/build/platform/generic/firmware/fw_jump.bin

A fourth file, named boot.json, should be created with the following content:

{
    "initrd_bb":   "0x82000000",
    "Image":       "0x80200000",
    "fw_jump.bin": "0x80000000"
}

Booting Linux:

To connect to the system's console, use the screen utility to connect to either /dev/ttyUSB0 or /dev/ttyUSB1 (might vary depending on the specific FPGA board):

screen /dev/ttyUSB1 115200

Running the corresponding openocd command mentioned above (specific to the bitstream/board being used) should result in the LiteX logo, followed by a memory initialization and test, and finally a litex> boot prompt.

Depending on whether TFTP or a SD card is being used, type either netboot or sdcardboot at the litex> prompt. This should result in a quick OpenSBI splash screen, followed by the Linux kernel booting, and finally a shell prompt from Busybox. Congratulations, you've booted Linux on a RV64GC CPU!

Booting Fedora:

LiteX/Rocket is capable of running the RISC-V port of Fedora. The process of "adapting" Fedora for booting on LiteX/Rocket is outlined in the author's FOSDEM23 talk.

To replicate that process:

  • Obtain a 32GB sized SD card

  • Download and unpack the pre-made SD card image:

    curl http://mirror.ini.cmu.edu/litex/litex_rocket_fedora_prebuilt.tar.xz \
         | tar xfJ -
    
  • Write the disk image to the physical SD card (available as /dev/sdX):

    dd if=litex_rocket_fedora_prebuilt/sdcard.bin of=/dev/sdX bs=8M oflag=direct
    

    This should be enough to boot Fedora on the ecpix5 board. For a different board (e.g., nexys-video), the following steps show how to replace the OpenSBI firmware blob.

  • Replicate the process of building fw_jump.bin using one of the Fedora specific *_fedora.dts files shipped in the conf folder

  • Eject and re-insert the SD card, then mount its first (FAT16) partition and copy the new OpenSBI firmware blob to it:

    mount /dev/sdX /mnt
    cp ~/opensbi/build/platform/generic/firmware/fw_jump.bin /mnt/fw_jump.fed
    umount /mnt
    
  • Insert the SD card into your ecpix5 or nexys-video board, program the board with your bitstream file (using openocd as shown above), then boot from the SD card:

    litex> sdcardboot
    

About

Run 64-bit Linux on LiteX + RocketChip

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •  

Languages