Update AuxTel Daytime-Checkout procedure to enable ATMCS before runni…

AuxTel/Standard-Operations/Daytime-Operations/Daytime-Checkout.rst

@@ -40,8 +40,8 @@ The scripts can all be found under the standard scripts panel in the *LOVE ATQue
 The order of script execution is nominally:
 
 * :file:`auxtel/enable_latiss.py` - Can be skipped if LATISS enabled 
-* :file:`auxtel/daytime_checkout/latiss_checkout.py`
 * :file:`auxtel/enable_atcs.py` - Can be skipped if ATCS already enabled
+* :file:`auxtel/daytime_checkout/latiss_checkout.py`
 * :file:`auxtel/daytime_checkout/atpneumatics_checkout.py`
 * :file:`auxtel/daytime_checkout/telescope_and_dome_checkout.py`
 * :file:`auxtel/daytime_checkout/slew_and_take_image_checkout.py`
@@ -51,6 +51,11 @@ The order of script execution is nominally:
 
 Bring *LATISS* to an enabled state to prepare for checkout. 
 
+*auxtel/enable_atcs.py*
+=======================
+
+Bring the *ATCS* into an enabled state to prepare for checkout. 
+
 *auxtel/daytime_checkout/latiss_checkout.py*
 ============================================
 
@@ -62,11 +67,6 @@ In case the image fails to appear, promptly communicate the issue in the channel
 
 You can also check if images are arriving correctly at Rubin's SLAC facility using `USDF RubinTV`_.
 
-*auxtel/enable_atcs.py*
-=======================
-
-Bring the *ATCS* into an enabled state to prepare for checkout. 
-
 *auxtel/daytime_checkout/atpneumatics_checkout.py*
 ==================================================
 
@@ -114,99 +114,6 @@ This procedure was last modified on |today|... |author| replace:: *E. Dennihy*
 .. _`summit's RubinTV`: https://summit-lsp.lsst.codes/rubintv/summit/auxtel 
 .. _`USDF RubinTV`: https://usdf-rsp-dev.slac.stanford.edu/rubintv 
 
-##################
-Daytime Checkout 
-##################
-
-
-To ensure the Auxiliary Telescope is fully operational and ready for nighttime use, 
-we have created a series of SAL Scripts that successively checkout each of the major components, 
-culminating in a full test of the system involving slewing to a target, tracking, and taking a test image with LATISS. 
-The goal of these scripts is to test the functionality of each component within the current software environment,
-and alert the daytime staff to any operational issues before going on-sky. 
-These tests are designed to be run using the script queue on LOVE during the daytime with an Observing Specialist 
-or other personnel available to verify their results. 
-
-The scripts are intended to be run in order, 
-but offer some flexibility in what state to leave the Auxiliary Telescope 
-(e.g. ready to take calibrations, ready to observe at night, or simply parked and shutdown). 
-They can also be run individually if a single component is undergoing maintenance 
-and requires a check of basic functionality. 
-
-**None of the scripts require configuration.**
-
-.. Important::
-
-    The daytime checkout scripts involve Telescope, Dome, and Instrument component movement. 
-    Before running, ensure that the area surrounding the telescope is and dome is clear for movement. 
-    You MUST announce that you are running the checks on the #summit-announce slack channel before execution. 
-
-The scripts can all be found under the standard scripts panel in the *LOVE ATQueue* view. 
-The order of script execution is nominally:
-
-* :file:`auxtel/enable_latiss.py` - Can be skipped if LATISS enabled 
-* :file:`auxtel/daytime_checkout/latiss_checkout.py`
-* :file:`auxtel/enable_atcs.py` - Can be skipped if ATCS already enabled
-* :file:`auxtel/daytime_checkout/atpneumatics_checkout.py`
-* :file:`auxtel/daytime_checkout/telescope_and_dome_checkout.py`
-* :file:`auxtel/daytime_checkout/slew_and_take_image_checkout.py`
-
-*auxtel/enable_latiss.py*
-=========================
-
-Bring *LATISS* to an enabled state to prepare for checkout. 
-
-*auxtel/daytime_checkout/latiss_checkout.py*
-============================================
-
-This script will take a bias and an engineering frame with *LATISS* 
-and ensure that they are ingested by the *OODS*.
-
-Verify that the bias appears on the `summit's RubinTV`_. 
-In case the image fails to appear, promptly communicate the issue in the Slack channel *#summit-auxtel*. 
-
-You can also check if images are arriving correctly at Rubin's SLAC facility using `USDF RubinTV`_.
-
-*auxtel/enable_atcs.py*
-=======================
-
-Bring the *ATCS* into an enabled state to prepare for checkout. 
-
-*auxtel/daytime_checkout/atpneumatics_checkout.py*
-==================================================
-
-This script will first turn on the valves and check that the line pressure is sufficient for operations. 
-Next, the telescope will be slewed to the park position, if it is not already there. 
-Then, it will turn on/off the *ATAOS* corrections before lowering the mirror back down onto its hard points.
-Finally, the mirror cover and vents are opened and closed. 
-
-*auxtel/daytime_checkout/telescope_and_dome_checkout.py*
-========================================================
-
-This script starts by performing a slew of the telescope without dome movement. 
-Then, sidereal tracking for the telescope is enabled and the system is left to track for a few minutes. 
-Tracking is disabled and then the dome is commanded to move to a new position, without telescope movement. 
-Finally, the telescope and dome are returned to a park position and left enabled.
-
-*auxtel/daytime_checkout/slew_and_take_image_checkout.py*
-=========================================================
-
-This script will slew the telescope and dome to two different targets, 
-track each target for 3 minutes and take a single verification image. 
-The mirror covers remain closed during the duration of the script. 
-At the end of the script, the telescope and dome are parked. 
-
-Check that the verification images pop up in the monitor at `summit's RubinTV`_.
-
-*auxtel/daytime_checkout/prepare_for/flat.py*
-=============================================
-This is the default end-of-checkout script. 
-It will leave the telescope in position to start taking afternoon calibrations. 
-If you are not sure how you want to leave the telescope,
-consider running this script as it will further exercise the system. 
-
-Other options include: :file:`prepare_for/onsky.py`, :file:`prepare_for/vent.py` or :file:`shutdown_all.py`
-
 Quick Troubleshooting
 =====================