Deploying script to deploy u-boot on raspberry pi 2 and 3 for the data generation clusters
This is a helper to fast flash a lot of SD Cards which help to boot up raspberry pis 2 and 3. The helper will install u-boot and all necessary components on the sd card and increase the MAC addresses of every u-boot image deployed.
Please have a look at the script before running it. Device path and raspberry pi version are mandatory. Others can be left blank. Initial values are shown below.
Values are:
$1 Raspberry Pi Version
$2 Device
$3 Mountpoint
$4 MAC prefix
$5 Start of MAC loop
$6 End of MAC loop
Usage: ./create_sd_card.sh 2 /dev/sdb1 /tmp/sdcard 00:03:02:00:00: 1 20