Newly Setup on new Laptop but... USB HUB fun!

[Godrickharg]

So, I gave up on this old Turing TURZX 5" shortly after I got it in 2023 (around the first prime days) and just never sent it back. It'd be nice to use, but seeing as its incompatible with Aida64 at this time, I'm determined to get it working with SOME sort of software, and not that **** listed on their website.

I just about have everything working.
Python Installed check
GIT installed, check
python runs commandline in tuturial check
all dependancies installed, and UPDATE run on pip. check

when I try to run the actual app, I get to the config screen, but it never gives me a chance to select a USB/COM port., its always Autodetect.

Granted, I run so much off my laptop, that I have no less than 3, no wait, 4 USB(multidevice) hubs.
Is there a way in the commandline to select the port that I believe it might be? The port its plugged into is a USBA 2/3.0 port.

Any helps appreciated.

[c0ldJS]

So long as you know which communications port is bound to the USB serial in use by the screen, you can declare that statically and perpetually in ~/config.yaml.

That said, USB hubs would add a wrinkle.

[Godrickharg]

So... zive tried removing everything but the Turing 5"... still nada.

I do get the following...

`D:\Turing Sensor Panel\turing-smart-screen-python>python.exe configure.py

D:\Turing Sensor Panel\turing-smart-screen-python>
D:\Turing Sensor Panel\turing-smart-screen-python>2024-08-07 4:53:38 PM [INFO] Loading theme Landscape15Grid from res/themes/Landscape15Grid/theme.yaml
2024-08-07 4:53:38 PM [DEBUG] HW revision: C
2024-08-07 4:53:38 PM [DEBUG] Auto detected COM port: COM3
System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information.

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
File "D:\Turing Sensor Panel\turing-smart-screen-python\main.py", line 64, in
import library.scheduler as scheduler
File "D:\Turing Sensor Panel\turing-smart-screen-python\library\scheduler.py", line 28, in
import library.stats as stats
File "D:\Turing Sensor Panel\turing-smart-screen-python\library\stats.py", line 67, in
import library.sensors.sensors_librehardwaremonitor as sensors
File "D:\Turing Sensor Panel\turing-smart-screen-python\library\sensors\sensors_librehardwaremonitor.py", line 40, in
clr.AddReference(lhm_dll)
System.IO.FileLoadException: Could not load file or assembly 'file:///D:\Turing Sensor Panel\turing-smart-screen-python\external\LibreHardwareMonitor\LibreHardwareMonitorLib.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)
File name: 'file:///D:\Turing Sensor Panel\turing-smart-screen-python\external\LibreHardwareMonitor\LibreHardwareMonitorLib.dll' ---> System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information.
at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Python.Runtime.AssemblyManager.LoadAssemblyFullPath(String name)
at Python.Runtime.CLRModule.AddReference(String name)

D:\Turing Sensor Panel\turing-smart-screen-python>python.exe configure.py

D:\Turing Sensor Panel\turing-smart-screen-python>2024-08-07 5:05:54 PM [INFO] Loading theme Landscape15Grid from res/themes/Landscape15Grid/theme.yaml
2024-08-07 5:05:55 PM [DEBUG] HW revision: C
2024-08-07 5:05:55 PM [DEBUG] Auto detected COM port: COM3
System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information.

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
File "D:\Turing Sensor Panel\turing-smart-screen-python\main.py", line 64, in
import library.scheduler as scheduler
File "D:\Turing Sensor Panel\turing-smart-screen-python\library\scheduler.py", line 28, in
import library.stats as stats
File "D:\Turing Sensor Panel\turing-smart-screen-python\library\stats.py", line 67, in
import library.sensors.sensors_librehardwaremonitor as sensors
File "D:\Turing Sensor Panel\turing-smart-screen-python\library\sensors\sensors_librehardwaremonitor.py", line 40, in
clr.AddReference(lhm_dll)
System.IO.FileLoadException: Could not load file or assembly 'file:///D:\Turing Sensor Panel\turing-smart-screen-python\external\LibreHardwareMonitor\LibreHardwareMonitorLib.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515)
File name: 'file:///D:\Turing Sensor Panel\turing-smart-screen-python\external\LibreHardwareMonitor\LibreHardwareMonitorLib.dll' ---> System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information.
at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark)
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
at Python.Runtime.AssemblyManager.LoadAssemblyFullPath(String name)
at Python.Runtime.CLRModule.AddReference(String name)`

[c0ldJS]

Is that Windows box using an Attachment Manager (10) or Smart App Control (11) policy that could be getting in your way? Windows is heavy handed when it comes to what it thinks an untrusted application is.

[mathoudebine]

Please follow this link to fix your issue: https://github.com/mathoudebine/turing-smart-screen-python/wiki/Troubleshooting#windows-cannot-load-librehardwaremonitordll-loadfromremotesources