CppInterOp

CppInterOp exposes API from Clang and LLVM in a backward compatible way. The API support downstream tools that utilize interactive C++ by using the compiler as a service. That is, embed Clang and LLVM as a libraries in their codebases. The API are designed to be minimalistic and aid non-trivial tasks such as language interoperability on the fly. In such scenarios CppInterOp can be used to provide the necessary introspection information to the other side helping the language cross talk.

Installation | Documentation | CppInterOp API Documentation

CppInterOp Introduction

The CppInterOp library provides a minimalist approach for other languages to bridge C++ entities (variables, classes, etc.). This enables interoperability with C++ code, bringing the speed and efficiency of C++ to simpler, more interactive languages like Python.

Incremental Adoption

CppInterOp can be adopted incrementally. While the rest of the framework is the same, a small part of CppInterOp can be utilized. More components may be adopted over time.

Minimalist by design

While the library includes some tricky code, it is designed to be simple and robust (simple function calls, no inheritance, etc.). The goal is to make it as close to the compiler API as possible, and each routine to do just one thing that it was designed for.

Further Enhancing the Dynamic/Automatic bindings in CPPYY

The main use case for CppInterOp is with the CPPYY service. CPPYY is an automatic run-time bindings generator for Python & C++, and supports a wide range of C++ features (e.g., template instantiation). It operates on demand and generates only what is necessary. It requires a compiler (Cling¹ /Clang-REPL²) that can be available during program runtime.

Once CppInterOp is integrated with LLVM's³ Clang-REPL component (that can then be used as a runtime compiler for CPPYY), it will further enhance CPPYY's performance in the following ways:

Simpler codebase: Removal of string parsing logic will lead to a simpler code base.
LLVM Integration: The CppInterOp interfaces will be a part of the LLVM toolchain (as part of Clang-REPL).
Better C++ Support: C++ features such as Partial Template Specialization will be available through CppInterOp.
Fewer Lines of Code: A lot of dependencies and workarounds will be removed, reducing the lines of code required to execute CPPYY.
Well tested interoperability Layer: The CppInterOp interfaces have full unit test coverage.

'Roots' in High Energy Physics research

Besides being developed as a general-purpose library, one of the long-term goals of CppInterOp is to stay backward compatible and be adopted in the High Energy Physics (HEP) field, as it will become an essential part of the Root framework. Over time, parts of the Root framework can be swapped by this API, adding speed and resilience with it.

Build Instructions (Includes instructions both Unix systems and Windows)

Build instructions for CppInterOp and its dependencies are as follows. CppInterOP can be built with either Cling and Clang-REPL, so instructions will differ slightly depending on which option you would like to build, but should be clear from the section title which instructions to follow.

Clone CppInterOp and cppyy-backend

First clone the CppInterOp repository, as this contains patches that need to be applied to the subsequently cloned llvm-project repo (these patches are only applied if building CppInterOp with Clang-REPL)

git clone --depth=1 https://github.com/compiler-research/CppInterOp.git

and clone cppyy-backend repository where we will be installing the CppInterOp library

git clone --depth=1 https://github.com/compiler-research/cppyy-backend.git

Setup Clang-REPL

Clone the 19.x release of the LLVM project repository.

git clone --depth=1 --branch release/19.x https://github.com/llvm/llvm-project.git
cd llvm-project

For Clang 16 & 17, the following patches required for development work. To apply these patches on Linux and MacOS execute the following command(substitute {version} with your clang version):

git apply -v ../CppInterOp/patches/llvm/clang{version}-*.patch

and

cp -r ..\CppInterOp\patches\llvm\clang17* .
git apply -v clang{version}-*.patch

on Windows.

Build Clang-REPL

Clang-REPL is an interpreter that CppInterOp works alongside. Build Clang (and Clang-REPL along with it). On Linux and MaxOS you do this by executing the following command

mkdir build 
cd build 
cmake -DLLVM_ENABLE_PROJECTS="clang;lld"                  \
                -DLLVM_TARGETS_TO_BUILD="WebAssembly;host;NVPTX"          \
                -DCMAKE_BUILD_TYPE=Release                          \
                -DLLVM_ENABLE_ASSERTIONS=ON                         \
                -DCLANG_ENABLE_STATIC_ANALYZER=OFF                  \
                -DCLANG_ENABLE_ARCMT=OFF                            \
                -DCLANG_ENABLE_FORMAT=OFF                           \
                -DCLANG_ENABLE_BOOTSTRAP=OFF                        \
                -DLLVM_ENABLE_ZSTD=OFF                              \
                -DLLVM_ENABLE_TERMINFO=OFF                          \
                -DLLVM_ENABLE_LIBXML2=OFF                           \
                ../llvm
cmake --build . --target clang clang-repl lld --parallel $(nproc --all)

On Windows you would do this by executing the following

$env:ncpus = $([Environment]::ProcessorCount)
mkdir build 
cd build 
cmake   -DLLVM_ENABLE_PROJECTS=clang                  `
        -DLLVM_TARGETS_TO_BUILD="host;NVPTX"          `
        -DCMAKE_BUILD_TYPE=Release                    `
        -DLLVM_ENABLE_ASSERTIONS=ON                   `
        -DCLANG_ENABLE_STATIC_ANALYZER=OFF            `
        -DCLANG_ENABLE_ARCMT=OFF                      `
        -DCLANG_ENABLE_FORMAT=OFF                     `
        -DCLANG_ENABLE_BOOTSTRAP=OFF                  `
        ..\llvm
        cmake --build . --target clang clang-repl --parallel $env:ncpus

Note the 'llvm-project' directory location. On linux and MacOS you execute the following

cd ../
export LLVM_DIR=$PWD
cd ../

On Windows you execute the following

cd ..\
$env:LLVM_DIR= $PWD.Path
cd ..\

Build Cling and related dependencies

Besides the Clang-REPL interpreter, CppInterOp also works alongside the Cling interpreter. Cling depends on its own customised version of llvm-project, hosted under the root-project (see the git path below). Use the following build instructions to build on Linux and MacOS

git clone https://github.com/root-project/cling.git
cd ./cling/
git checkout tags/v1.0
cd ..
git clone --depth=1 -b cling-llvm13 https://github.com/root-project/llvm-project.git
mkdir llvm-project/build
cd llvm-project/build
cmake -DLLVM_ENABLE_PROJECTS="clang;lld"               \
                -DLLVM_EXTERNAL_PROJECTS=cling                     \
                -DLLVM_EXTERNAL_CLING_SOURCE_DIR=../../cling       \
                -DLLVM_TARGETS_TO_BUILD="WebAssembly;host;NVPTX"   \
                -DCMAKE_BUILD_TYPE=Release                         \
                -DLLVM_ENABLE_ASSERTIONS=ON                        \
                -DCLANG_ENABLE_STATIC_ANALYZER=OFF                 \
                -DCLANG_ENABLE_ARCMT=OFF                           \
                -DCLANG_ENABLE_FORMAT=OFF                          \
                -DCLANG_ENABLE_BOOTSTRAP=OFF                       \
                -DLLVM_ENABLE_ZSTD=OFF                             \
                -DLLVM_ENABLE_TERMINFO=OFF                         \
                -DLLVM_ENABLE_LIBXML2=OFF                          \
                ../llvm
cmake --build . --target lld --parallel $(nproc --all)
cmake --build . --target clang --parallel $(nproc --all)
cmake --build . --target cling --parallel $(nproc --all)
cmake --build . --target gtest_main --parallel $(nproc --all)

Use the following build instructions to build on Windows

git clone https://github.com/root-project/cling.git
cd .\cling\
git checkout tags/v1.0
cd ..
git clone --depth=1 -b cling-llvm13 https://github.com/root-project/llvm-project.git
$env:ncpus = %NUMBER_OF_PROCESSORS%
$env:PWD_DIR= $PWD.Path
$env:CLING_DIR="$env:PWD_DIR\cling"
mkdir llvm-project\build
cd llvm-project\build
cmake   -DLLVM_ENABLE_PROJECTS=clang                  `
        -DLLVM_EXTERNAL_PROJECTS=cling                `
        -DLLVM_EXTERNAL_CLING_SOURCE_DIR="$env:CLING_DIR"   `
        -DLLVM_TARGETS_TO_BUILD="host;NVPTX"          `
        -DCMAKE_BUILD_TYPE=Release                    `
        -DLLVM_ENABLE_ASSERTIONS=ON                   `
        -DCLANG_ENABLE_STATIC_ANALYZER=OFF            `
        -DCLANG_ENABLE_ARCMT=OFF                      `
        -DCLANG_ENABLE_FORMAT=OFF                     `
        -DCLANG_ENABLE_BOOTSTRAP=OFF                  `
        ../llvm
cmake --build . --target clang --parallel $env:ncpus
cmake --build . --target cling --parallel $env:ncpus
cmake --build . --target gtest_main --parallel $env:ncpus

Note the 'llvm-project' directory location. On linux and MacOS you execute the following

cd ../
export LLVM_DIR=$PWD
cd ../

On Windows you execute the following

cd ..\
$env:LLVM_DIR= $PWD.Path
cd ..\

Environment variables

Regardless of whether you are building CppInterOP with Cling or Clang-REPL you will need to define the following environment variables (as they clear for a new session, it is recommended that you also add these to your .bashrc in linux, .bash_profile if on MacOS, or profile.ps1 on Windows). On Linux and MacOS you define as follows

export CB_PYTHON_DIR="$PWD/cppyy-backend/python"
export CPPINTEROP_DIR="$CB_PYTHON_DIR/cppyy_backend"
export CPLUS_INCLUDE_PATH="${CPLUS_INCLUDE_PATH}:${LLVM_DIR}/llvm/include:${LLVM_DIR}/clang/include:${LLVM_DIR}/build/include:${LLVM_DIR}/build/tools/clang/include"

If on MacOS you will also need the following environment variable defined

export SDKROOT=`xcrun --show-sdk-path`

On Windows you define as follows (assumes you have defined $env:PWD_DIR= $PWD.Path )

$env:CB_PYTHON_DIR="$env:PWD_DIR\cppyy-backend\python"
$env:CPPINTEROP_DIR="$env:CB_PYTHON_DIR\cppyy_backend"
$env:CPLUS_INCLUDE_PATH="$env:CPLUS_INCLUDE_PATH;$env:LLVM_DIR\llvm\include;$env:LLVM_DIR\clang\include;$env:LLVM_DIR\build\include;$env:LLVM_DIR\build\tools\clang\include"

Build CppInterOp

Now CppInterOp can be installed. On Linux and MacOS execute

mkdir CppInterOp/build/
cd CppInterOp/build/

On Windows execute

mkdir CppInterOp\build\
cd CppInterOp\build\

Now if you want to build CppInterOp with Clang-REPL then execute the following commands on Linux and MacOS

cmake -DBUILD_SHARED_LIBS=ON -DUSE_CLING=Off -DUSE_REPL=ON -DLLVM_DIR=$LLVM_DIR/build/lib/cmake/llvm -DClang_DIR=$LLVM_DIR/build/lib/cmake/clang -DCMAKE_INSTALL_PREFIX=$CPPINTEROP_DIR ..
cmake --build . --target install --parallel $(nproc --all)

and

cmake -DUSE_CLING=Off -DUSE_REPL=ON -DLLVM_DIR=$env:LLVM_DIR\build\lib\cmake\llvm -DClang_DIR=$env:LLVM_DIR\build\lib\cmake\clang -DCMAKE_INSTALL_PREFIX=$env:CPPINTEROP_DIR ..
cmake --build . --target install --parallel $env:ncpus

on Windows. If alternatively you would like to install CppInterOp with Cling then execute the following commands on Linux and MacOS

cmake -DBUILD_SHARED_LIBS=ON -DUSE_CLING=ON -DUSE_REPL=Off -DCling_DIR=$LLVM_DIR/build/tools/cling -DLLVM_DIR=$LLVM_DIR/build/lib/cmake/llvm -DClang_DIR=$LLVM_DIR/build/lib/cmake/clang -DCMAKE_INSTALL_PREFIX=$CPPINTEROP_DIR ..
cmake --build . --target install --parallel $(nproc --all)

and

cmake -DUSE_CLING=ON -DUSE_REPL=Off -DCling_DIR=$env:LLVM_DIR\build\tools\cling -DLLVM_DIR=$env:LLVM_DIR\build\lib\cmake\llvm -DClang_DIR=$env:LLVM_DIR\build\lib\cmake\clang -DCMAKE_INSTALL_PREFIX=$env:CPPINTEROP_DIR ..
cmake --build . --target install --parallel $env:ncpus

Testing CppInterOp

To test the built CppInterOp execute the following command in the CppInterOP build folder on Linux and MacOS

cmake --build . --target check-cppinterop --parallel $(nproc --all)

and

cmake --build . --target check-cppinterop --parallel $env:ncpus

on Windows. Now go back to the top level directory in which your building CppInterOP. On Linux and MacOS you do this by executing

cd ../..

and

cd ..\..

on Windows. Now you are in a position to install cppyy following the instructions below.

Building and Install cppyy-backend

Cd into the cppyy-backend directory, build it and copy library files into python/cppyy-backend directory:

cd cppyy-backend
mkdir -p python/cppyy_backend/lib build 
cd build
cmake -DCppInterOp_DIR=$CPPINTEROP_DIR ..
cmake --build .

If on a linux system now execute the following command

cp libcppyy-backend.so ../python/cppyy_backend/lib/

and if on MacOS execute the following command

cp libcppyy-backend.dylib ../python/cppyy_backend/lib/

Note go back to the top level build directory

cd ../..

Install CPyCppyy

Create virtual environment and activate it:

python3 -m venv .venv
source .venv/bin/activate

git clone --depth=1 https://github.com/compiler-research/CPyCppyy.git
mkdir CPyCppyy/build
cd CPyCppyy/build
cmake ..
cmake --build .

Note down the path to the build directory as CPYCPPYY_DIR:

export CPYCPPYY_DIR=$PWD
cd ../..

Export the libcppyy path to python:

export PYTHONPATH=$PYTHONPATH:$CPYCPPYY_DIR:$CB_PYTHON_DIR

and on Windows:

$env:PYTHONPATH="$env:PYTHONPATH;$env:CPYCPPYY_DIR;$env:CB_PYTHON_DIR"

Install cppyy

git clone --depth=1 https://github.com/compiler-research/cppyy.git
cd cppyy
python -m pip install --upgrade . --no-deps --no-build-isolation
cd ..

Run cppyy

Each time you want to run cppyy you need to: Activate the virtual environment

source .venv/bin/activate

Now you can import cppyy in python

python -c "import cppyy"

Run cppyy tests

Follow the steps in Run cppyy. Change to the test directory, make the library files and run pytest:

cd cppyy/test
make all
python -m pip install pytest
python -m pytest -sv

Further Reading: C++ Language Interoperability Layer

Cling is an interpretive Compiler for C++. ↩
Clang-REPL is an interactive C++ interpreter that enables incremental compilation. ↩
LLVM is a Compiler Framework. It is a collection of modular compiler and toolchain technologies. ↩

Name		Name	Last commit message	Last commit date
Latest commit History 436 Commits
.github/workflows		.github/workflows
cmake		cmake
docs		docs
include/clang/Interpreter		include/clang/Interpreter
lib		lib
patches/llvm		patches/llvm
unittests		unittests
.clang-format		.clang-format
.clang-tidy		.clang-tidy
.codecov.yml		.codecov.yml
.gitignore		.gitignore
.readthedocs.yaml		.readthedocs.yaml
CMakeLists.txt		CMakeLists.txt
LICENSE.txt		LICENSE.txt
README.md		README.md
VERSION		VERSION
environment-wasm-build.yml		environment-wasm-build.yml
environment-wasm.yml		environment-wasm.yml

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

CppInterOp

Installation | Documentation | CppInterOp API Documentation

CppInterOp Introduction

Incremental Adoption

Minimalist by design

Further Enhancing the Dynamic/Automatic bindings in CPPYY

'Roots' in High Energy Physics research

Build Instructions (Includes instructions both Unix systems and Windows)

Clone CppInterOp and cppyy-backend

Setup Clang-REPL

Build Clang-REPL

Build Cling and related dependencies

Environment variables

Build CppInterOp

Testing CppInterOp

Building and Install cppyy-backend

Install CPyCppyy

Install cppyy

Run cppyy

Run cppyy tests

About

Releases

Packages

Languages

License

mcbarton/CppInterOp

Folders and files

Latest commit

History

Repository files navigation

CppInterOp

Installation | Documentation | CppInterOp API Documentation

CppInterOp Introduction

Incremental Adoption

Minimalist by design

Further Enhancing the Dynamic/Automatic bindings in CPPYY

'Roots' in High Energy Physics research

Build Instructions (Includes instructions both Unix systems and Windows)

Clone CppInterOp and cppyy-backend

Setup Clang-REPL

Build Clang-REPL

Build Cling and related dependencies

Environment variables

Build CppInterOp

Testing CppInterOp

Building and Install cppyy-backend

Install CPyCppyy

Install cppyy

Run cppyy

Run cppyy tests

Footnotes

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages