sldr

DC soldering iron controller for JBC C105, C115 and C210 handles

Accepting fake JCB handles from Ali/Ebay, example.

Up to 2A of current.

This board requires two supplies: for stm32 microcontroller (DC 5V) and the iron (variable up to DC 7.5 V / 2A).

JBC C105 cartridge resistance 3.6 Ohm.

JBC C210 cartridge resistance 2.5 Ohm.

Disclaimer: This is DIY contoller board. Use it on your own risk. I'm not responsible for any damage caused buy this product or service.

Set up compiler

$ sudo apt install gcc-arm-none-eabi

Get sources and build the project

$ git clone --recursive https://github.com/mdepx/sldr
$ cd sldr
$ make clean all

Use STLINK-V3MINIE to program this board.