Logging

Symfony comes with a minimalist PSR-3 logger: :class:`Symfony\\Component\\HttpKernel\\Log\\Logger`. In conformance with the twelve-factor app methodology, it sends messages starting from the WARNING level to stderr.

The minimal log level can be changed by setting the SHELL_VERBOSITY environment variable:

`SHELL_VERBOSITY` value	Minimum log level
`-1`	`ERROR`
`1`	`NOTICE`
`2`	`INFO`
`3`	`DEBUG`

The minimum log level, the default output and the log format can also be changed by passing the appropriate arguments to the constructor of :class:`Symfony\\Component\\HttpKernel\\Log\\Logger`. To do so, :ref:`override the "logger" service definition <service-psr4-loader>`.

Logging a Message

To log a message, inject the default logger in your controller or service:

use Psr\Log\LoggerInterface;
// ...

public function index(LoggerInterface $logger): Response
{
    $logger->info('I just got the logger');
    $logger->error('An error occurred');

    // log messages can also contain placeholders, which are variable names
    // wrapped in braces whose values are passed as the second argument
    $logger->debug('User {userId} has logged in', [
        'userId' => $this->getUserId(),
    ]);

    $logger->critical('I left the oven on!', [
        // include extra "context" info in your logs
        'cause' => 'in_hurry',
    ]);

    // ...
}

Adding placeholders to log messages is recommended because:

It's easier to check log messages because many logging tools group log messages that are the same except for some variable values inside them;
It's much easier to translate those log messages;
It's better for security, because escaping can then be done by the implementation in a context-aware fashion.

The logger service has different methods for different logging levels/priorities. See LoggerInterface for a list of all of the methods on the logger.

Monolog

Symfony integrates seamlessly with Monolog, the most popular PHP logging library, to create and store log messages in a variety of different places and trigger various actions.

For instance, using Monolog you can configure the logger to do different things based on the level of a message (e.g. :doc:`send an email when an error occurs </logging/monolog_email>`).

Run this command to install the Monolog based logger before using it:

$ composer require symfony/monolog-bundle

The following sections assume that Monolog is installed.

Where Logs are Stored

By default, log entries are written to the var/log/dev.log file when you're in the dev environment.

In the prod environment, logs are written to STDERR PHP stream, which works best in modern containerized applications deployed to servers without disk write permissions.

If you prefer to store production logs in a file, set the path of your log handler(s) to the path of the file to use (e.g. var/log/prod.log).

Handlers: Writing Logs to different Locations

The logger has a stack of handlers, and each can be used to write the log entries to different locations (e.g. files, database, Slack, etc).

Tip

You can also configure logging "channels", which are like categories. Each channel can have its own handlers, which means you can store different log messages in different places. See :doc:`/logging/channels_handlers`.

Symfony pre-configures some basic handlers in the default monolog.yaml config files. Check these out for some real-world examples.

This example uses two handlers: stream (to write to a file) and syslog to write logs using the :phpfunction:`syslog` function:

.. configuration-block::

    .. code-block:: yaml

        # config/packages/prod/monolog.yaml
        monolog:
            handlers:
                # this "file_log" key could be anything
                file_log:
                    type: stream
                    # log to var/log/(environment).log
                    path: "%kernel.logs_dir%/%kernel.environment%.log"
                    # log *all* messages (debug is lowest level)
                    level: debug

                syslog_handler:
                    type: syslog
                    # log error-level messages and higher
                    level: error

    .. code-block:: xml

        <!-- config/packages/prod/monolog.xml -->
        <?xml version="1.0" encoding="UTF-8" ?>
        <container xmlns="http://symfony.com/schema/dic/services"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xmlns:monolog="http://symfony.com/schema/dic/monolog"
            xsi:schemaLocation="http://symfony.com/schema/dic/services
                https://symfony.com/schema/dic/services/services-1.0.xsd
                http://symfony.com/schema/dic/monolog
                https://symfony.com/schema/dic/monolog/monolog-1.0.xsd">

            <monolog:config>
                <!-- this "file_log" key could be anything -->
                <monolog:handler name="file_log"
                    type="stream"
                    path="%kernel.logs_dir%/%kernel.environment%.log"
                    level="debug"/><!-- log *all* messages (debug is lowest level) -->

                <monolog:handler name="syslog_handler"
                    type="syslog"
                    level="error"/><!-- log error-level messages and higher -->
            </monolog:config>
        </container>

    .. code-block:: php

        // config/packages/prod/monolog.php
        use Symfony\Config\MonologConfig;

        return static function (MonologConfig $monolog): void {
            // this "file_log" key could be anything
            $monolog->handler('file_log')
                ->type('stream')
                // log to var/logs/(environment).log
                ->path('%kernel.logs_dir%/%kernel.environment%.log')
                // log *all* messages (debug is lowest level)
                ->level('debug');

            $monolog->handler('syslog_handler')
                ->type('syslog')
                // log error-level messages and higher
                ->level('error');
        };

This defines a stack of handlers and each handler is called in the order that it's defined.

Note

If you want to override the monolog configuration via another config file, you will need to redefine the entire handlers stack. The configuration from the two files cannot be merged because the order matters and a merge does not allow you to control the order.

Handlers that Modify Log Entries

Instead of writing log files somewhere, some handlers are used to filter or modify log entries before sending them to other handlers. One powerful, built-in handler called fingers_crossed is used in the prod environment by default. It stores all log messages during a request but only passes them to a second handler if one of the messages reaches an action_level. Take this example:

.. configuration-block::

    .. code-block:: yaml

        # config/packages/prod/monolog.yaml
        monolog:
            handlers:
                filter_for_errors:
                    type: fingers_crossed
                    # if *one* log is error or higher, pass *all* to file_log
                    action_level: error
                    handler: file_log

                # now passed *all* logs, but only if one log is error or higher
                file_log:
                    type: stream
                    path: "%kernel.logs_dir%/%kernel.environment%.log"

                # still passed *all* logs, and still only logs error or higher
                syslog_handler:
                    type: syslog
                    level: error

    .. code-block:: xml

        <!-- config/packages/prod/monolog.xml -->
        <?xml version="1.0" encoding="UTF-8" ?>
        <container xmlns="http://symfony.com/schema/dic/services"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xmlns:monolog="http://symfony.com/schema/dic/monolog"
            xsi:schemaLocation="http://symfony.com/schema/dic/services
                https://symfony.com/schema/dic/services/services-1.0.xsd
                http://symfony.com/schema/dic/monolog
                https://symfony.com/schema/dic/monolog/monolog-1.0.xsd">

            <monolog:config>
                <!-- if *one* log is error or higher, pass *all* to file_log -->
                <monolog:handler name="filter_for_errors"
                    type="fingers_crossed"
                    action-level="error"
                    handler="file_log"
                />

                <!-- now passed *all* logs, but only if one log is error or higher -->
                <monolog:handler name="file_log"
                    type="stream"
                    path="%kernel.logs_dir%/%kernel.environment%.log"
                    level="debug"
                />

                <!-- still passed *all* logs, and still only logs error or higher -->
                <monolog:handler name="syslog_handler"
                    type="syslog"
                    level="error"
                />
            </monolog:config>
        </container>

    .. code-block:: php

        // config/packages/prod/monolog.php
        use Symfony\Config\MonologConfig;

        return static function (MonologConfig $monolog): void {
            $monolog->handler('filter_for_errors')
                ->type('fingers_crossed')
                // if *one* log is error or higher, pass *all* to file_log
                ->actionLevel('error')
                ->handler('file_log')
            ;

            // now passed *all* logs, but only if one log is error or higher
            $monolog->handler('file_log')
                ->type('stream')
                ->path('%kernel.logs_dir%/%kernel.environment%.log')
                ->level('debug')
            ;

            // still passed *all* logs, and still only logs error or higher
            $monolog->handler('syslog_handler')
                ->type('syslog')
                ->level('error')
            ;
        };

Now, if even one log entry has an error level or higher, then all log entries for that request are saved to a file via the file_log handler. That means that your log file will contain all the details about the problematic request - making debugging much easier!

Tip

The handler named "file_log" will not be included in the stack itself as it is used as a nested handler of the fingers_crossed handler.

All Built-in Handlers

Monolog comes with many built-in handlers for emailing logs, sending them to Loggly, or notifying you in Slack. These are documented inside of MonologBundle itself. For a full list, see Monolog Configuration.

How to Rotate your Log Files

Over time, log files can grow to be huge, both while developing and on production. One best-practice solution is to use a tool like the logrotate Linux command to rotate log files before they become too large.

Another option is to have Monolog rotate the files for you by using the rotating_file handler. This handler creates a new log file every day and can also remove old files automatically. To use it, set the type option of your handler to rotating_file:

.. configuration-block::

    .. code-block:: yaml

        # config/packages/prod/monolog.yaml
        monolog:
            handlers:
                main:
                    type:  rotating_file
                    path:  '%kernel.logs_dir%/%kernel.environment%.log'
                    level: debug
                    # max number of log files to keep
                    # defaults to zero, which means infinite files
                    max_files: 10

    .. code-block:: xml

        <!-- config/packages/prod/monolog.xml -->
        <?xml version="1.0" encoding="UTF-8" ?>
        <container xmlns="http://symfony.com/schema/dic/services"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xmlns:monolog="http://symfony.com/schema/dic/monolog"
            xsi:schemaLocation="http://symfony.com/schema/dic/services
                https://symfony.com/schema/dic/services/services-1.0.xsd
                http://symfony.com/schema/dic/monolog
                https://symfony.com/schema/dic/monolog/monolog-1.0.xsd">

            <monolog:config>
                <!-- "max-files": max number of log files to keep
                     defaults to zero, which means infinite files -->
                <monolog:handler name="main"
                    type="rotating_file"
                    path="%kernel.logs_dir%/%kernel.environment%.log"
                    level="debug"
                    max-files="10"
                />
            </monolog:config>
        </container>

    .. code-block:: php

        // config/packages/prod/monolog.php
        use Symfony\Config\MonologConfig;

        return static function (MonologConfig $monolog): void {
            $monolog->handler('main')
                ->type('rotating_file')
                ->path('%kernel.logs_dir%/%kernel.environment%.log')
                ->level('debug')
                // max number of log files to keep
                // defaults to zero, which means infinite files
                ->maxFiles(10);
        };

Using a Logger inside a Service

If your application uses :ref:`service autoconfiguration <services-autoconfigure>`, any service whose class implements Psr\Log\LoggerAwareInterface will receive a call to its method setLogger() with the default logger service passed as a service.

If you want to use in your own services a pre-configured logger which uses a specific channel (app by default), you can either :ref:`autowire monolog channels <monolog-autowire-channels>` or use the monolog.logger tag with the channel property as explained in the :ref:`Dependency Injection reference <dic_tags-monolog>`.

Adding extra Data to each Log (e.g. a unique request token)

Monolog also supports processors: functions that can dynamically add extra information to your log entries.

See :doc:`/logging/processors` for details.

Handling Logs in Long Running Processes

During long running processes, logs can be accumulated into Monolog and cause some buffer overflow, memory increase or even non logical logs. Monolog in-memory data can be cleared using the reset() method on a Monolog\Logger instance. This should typically be called between every job or task that a long running process is working through.

Learn more

.. toctree::
    :maxdepth: 1

    logging/monolog_email
    logging/channels_handlers
    logging/formatter
    logging/processors
    logging/handlers
    logging/monolog_exclude_http_codes
    logging/monolog_console

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

logging.rst

logging.rst

Logging

Logging a Message

Monolog

Where Logs are Stored

Handlers: Writing Logs to different Locations

Handlers that Modify Log Entries

All Built-in Handlers

How to Rotate your Log Files

Using a Logger inside a Service

Adding extra Data to each Log (e.g. a unique request token)

Handling Logs in Long Running Processes

Learn more

Files

logging.rst

Latest commit

History

logging.rst

File metadata and controls

Logging

Logging a Message

Monolog

Where Logs are Stored

Handlers: Writing Logs to different Locations

Handlers that Modify Log Entries

All Built-in Handlers

How to Rotate your Log Files

Using a Logger inside a Service

Adding extra Data to each Log (e.g. a unique request token)

Handling Logs in Long Running Processes

Learn more