This role installs and configures InfiniBand interfaces.
Define the APT or YUM/DNF repositories, with the path to the GPG key.
# Default apt repository
infiniband_apt_repository: 'deb https://linux.mellanox.com/public/repo/mlnx_ofed/latest/ubuntu18.04/amd64/ ./'
# Default yum/dnf repository
infiniband_yum_repository: 'https://linux.mellanox.com/public/repo/mlnx_ofed/latest/rhel8.3/$basearch/'
# Mellanox GPG Key
infiniband_gpg_key: 'http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox'
To upgrade the packages to the latest version available.
infiniband_upgrade: True
To pin the priority of the repository (APT only).
infiniband_apt_priority: 490
The name of the kernel headers package might change across distros. This can be defined with:
infiniband_kernel_headers_package: 'linux-headers'
Some appliances like the NVIDIA DGX run their own software stack. When an appliance already manages the installation of the Mellanox OFED drivers, there is no need to configure additional repositories or to install the drivers. In such cases, the parameters below can be set to False in the host inventory. This is also true when using the kernel modules from the distro.
infiniband_configure_repos: True
infiniband_install_kernel_modules: True
Define the list of interfaces to configure with IPoIB. Each item of the list must define the interface name (iface), the offset from the default ipv4 address and the CIDR prefix. If the list is not defined, the role will not configure any IPoIB interface.
infiniband_ipoib_interfaces:
- iface: 'ib0'
offset: -3064461568
prefix: 17
To compute the offset, use:
$ python3 <<EOF
import ipaddress
source_net='192.168.121.0'
target_net='10.0.128.0'
offset=(int(ipaddress.ip_address(source_net))-int(ipaddress.ip_address(target_net)))
print(f"offset: -{offset}")
EOF
Configure the list of Mellanox HCAs with the parameters to apply. The pci_bus must match the value in /sys/bus/pci/devices/ (e.g. /sys/bus/pci/devices/0000:41:00.0/)
infiniband_hca_devices:
- device: mlx5_0
pci_bus: '0000:41:00.0'
sriov_en: True
num_of_vfs: 8
Only parameters SRIOV_EN and NUM_OF_VFS are supported for now.
Define the prefix to use for the 64-bits IB GUID of VFs. The role will define the GUID with:
- prefix (40 bits)
- "00" (8 bits)
- device ID (8 bits): item index in list infiniband_hca_devices above
- VF ID (8 bits): index of VF in range(infiniband_hca_devices[*].num_of_vfs)
It is highly recommended to define a value different than the default if you plan to configure more than one host with SR-IOV in your IB fabric.
To allow failover in high availability configuration, make sure to use the same infiniband_hca_devices and infiniband_guid_prefix for all hosts where a given VM could run.
infiniband_guid_prefix: "4d:69:6c:61:00"
By default, the role will reboot the hosts to load any new configuration. It is possible to forbid the reboot with:
infiniband_allow_reboot: false
To avoid any unexpected downtime in high availability clusters, the role will reboot the hosts one after the other. It is possible to increase the throttle with:
infiniband_throttle_reboot: "{{ ansible_play_hosts | length }}"
Install and configure InfiniBand:
- hosts: computes:&infiniband
roles:
- role: mila.infiniband
tags: 'role::infiniband'