-
Notifications
You must be signed in to change notification settings - Fork 102
Home
If you have been successful in updating a device that's not on the list, it please take a few seconds to update the list below so others know what does and does not work.
| Device | Working Sonoff Firmware Version | Reported By |
|---|---|---|
| Sonoff Basic | ✅ v1.5.2, v1.5.5 (❌ v1.6.x does not work #58) | sillyfrog |
| Sonoff Basic2 | ❌ 2.6.0, 2.6.1, 2.9.0, 3.0.1, 3.3.0, 3.4.0, 3.4.1 are not working | JacSjoerd, Selfish, lucyyyyyyy, yoeywire |
| Sonoff Dual | v1.1.0 | sillyfrog |
| Sonoff Dual | v1.5.5 | mattlward, vikingFr |
| Sonoff Dual R2 | v2.0.1 (2.7.1 didn't work->Not reach FinalStage) | arendst |
| Sonoff S20 | v1.5.5 (v1.5.2 mixed results) (NOTE: Before you try to flash check out #66) | simonszu, sillyfrog, Herschdorfer |
| Sonoff TH / TH16 | v2.0.4 (v2.0.1 requires running with sudo and --legacy option) |
sillyfrog, Vikingfr(2.0.4), EliasKotlyar |
| Sonoff 4CH / 4CH Pro | v2.0.1 (v2.0.0 did not work) | krokce, iMarkus (wiktorschmidt) |
| Sonoff B1 & BN-SZ01 | v2.0.2 requires DNS spoofing and --legacy with --no-prov, see #20
|
rajil |
| Sonoff POW | v2.0.4 (v2.0.2 requires --legacy & --slowstream) |
echox, Xeroxxx, Vikingfr |
| Sonoff POW R2 | (v1.0.0 did not work) | franksimoes |
| Sonoff 1 Channel Inching | v1.6.2 | badigit |
| Sonoff Slampher | v1.6.2 DNS spoof (dnsmasq MAC OSX)+ Pair with eWelink app and --legacy --no-prov --serving-host 192.168.X.X
|
kconfesor, flavio20002 (v1.6.2 with default options) , EliasKotlyar |
| Sonoff SC | v2.0.1 using --legacy --slowstream
|
issacg |
| Sonoff RF | 1.5.5 | 10der |
| Sonoff SV | 1.5.5 | dagmenico |
| AOGETYO IP55 | 1.6.2 | MasterPu / Outdoor Socket with ESP8285 Itead board (need 2x 7second press for AP) |
| Eruiklink Generic Sonoff_eWelink T1 | 2.0.1 - Flash with --legacy | Pabloalcantara - Worked on 1, 2 and 3 gangs) |
| Sonoff 4CH Pro R2 | 2.0.1 | Mark5 (some models appear to use a different type of flash, and don't work) |
| Sonoff Touch | v1.6.2 | krokce & daill (ootb) |
| Sonoff Touch Dual UK | v2.0.1 | tompipe: yes, bubi: Sonoff Touch dual does not exists. Also, the 2018-10-01 version of Sonoff Touch is 1.8.1 |
| Sonoff Touch US | 1.8.1 | bubi: doesn't work |
| Sonoff T0 2CH EU | v3.0.0 does not work | bokub |
| Sonoff T0 1CH EU | ❌ v3.5.1 does not work (2021-06-29) | bmontuelle |
| Sonoff T1 2CH EU | v2.0.1 | copyrights |
| Sonoff T1 2CH EU | v2.0.1 | copyrights |
| Sonoff T1 1CH US | v2.0.1 using sonota.exe | bubi: working |
| Sonoff T1 2CH US | v2.0.1 using sonota.exe | bubi: working |
| Sonoff T1 3CH US | v2.0.1 yes, v2.6.x no, v3.x, no | bubi: v2; p1x, v2; josharmenta: v3 |
| Sonoff T1 3CH UK - Second Generation (PSF-B04-GL) | v2.0.0 using sonota.exe | SoundGuy: Success! |
| Sonoff T1 2CH | 2.0.1 | issacg: no issues at all, kcsj17: no issues except it took a while (20mins at least) for the FinalStage SSID to appear, flochocinco: OK but without option ("-s" doesn't work). no lines when finished |
| Sonoff T1 2CH US | v2.6.0 | doesn't work |
| Sonoff RF Bridge 433 | v1.0 Does not work | |
| Sonoff RF Bridge 433 | v2.7.0 Does not work (24-02-2019) | |
| Sonoff RF Bridge 433 V2 | v3.4.0 Does not work (2020-04-26) | stoatwblr: Sonota seems to start ok (connected to the itead network first, using --no-prov ), but the device times out, resets and reconnects to the ewelink-configured network after about 3 minutes. Sonota doesn't notice this |
| lx-wifi-03O | Taniel: It never has been connected to ewelink server. Now it's working with others apps!! thanks | |
| PS-16-DZ | Sold on Amazon as Wsiiroon WiFi Dimmer Switch a/o 10-12-2018 - Works! | |
| Sonoff iFan02 | 2.6.0 | Doesn't work (17-06-2019) |
| Sonoff iFan02 | 2.0.1 | Need to flash to latest tasmota to support ifan02 |
| Sonoff S26 | 2.6.0 and 2.9.0 | Doesn't work (28-12-2018) |
| Sonoff S26 R2 | ?? | Doesn't work (09-04-2022) |
If you didn't connect using the EWeLink app (which you don't need to do most of the time), the version will be shown as romVersion in amongst the output printed to screen after a successful run.
On various devices it appears that a 2nd 7 second button press is required sometimes to put the Sonoff into Configuration mode so it will broadcast the ITEAD-###### SSID. If after pressing the button for 7 seconds you have a pattern such as blink-blink-blink-pause-blink-blink-blink-pause, press the button again for another 7 seconds until you have a steady blink-blink-blink...
usage: sonota.exe [-h] [--serving-host SERVING_HOST] [--no-prov]
[--wifi-ssid WIFI_SSID] [--wifi-password WIFI_PASSWORD]
[--no-check-ip] [--legacy] [-s]
optional arguments:
-h, --help
show this help message and exit
--serving-host SERVING_HOST
The host's ip address which will handle the
HTTP(S)/WebSocket requests initiated by the device.
Normally the ip address of the WiFi interface of the
machine this script is running on.
--no-prov
Do not provision the device with WiFi credentials.
Only use if your device is already configured (Not
recommended, but useful if doing DNS spoofing).
--wifi-ssid WIFI_SSID
The ESSID of the WiFi network the device should
eventually connect to.
--wifi-password WIFI_PASSWORD
The password of the WiFi (WPA/WPA2) network the device
should eventually connect to.
--no-check-ip
Do not check for correct network settings applied on
your interface(s).
--legacy
Enable legacy mode for devices with older firmware
(requires root permission)
-s, --slowstream
Serve files slowly, use if getting 404 errors