Created a UART API definition in softuart.h to allow the example code…

… to access UART in a standard manner , irrespective of how it is implemented.

include/uart/api.h

@@ -0,0 +1,96 @@
+/** \file include/uart/api.h
+ * This file is for defining a common API for accessing UARTs.
+ **/
+
+#ifndef UART_API_H
+#define UART_API_H
+
+#include "fx2types.h"
+#include "stdarg.h"
+
+/**
+ * \brief Initalizes UART.
+ * Returns TRUE if initialization is successful.
+ * \param Rate See uartX_set_baud().
+ **/
+BOOL uartX_init(enum uart_baud rate, ...);
+
+/**
+ * \brief enum Standard available baud rates.
+ * All enum values less than 0 are not to be used unless absolutely necessary.
+ * Enum values greater than 0 are supported depending on the UART in use.To check
+ * if the baud is supported call uartX_set_baud and use the return value to determine
+ * if the mode is supported.
+**/
+typedef enum {
+    BAUD_FASTEST = -2,	///< The fastest BAUD available on the system for UART.
+    BAUD_ANY = -1,	///< Virtual baud, Most efficient BAUD rate for the UART.
+    BAUD_INVALID = 0,	///< A divider between actual baud rates and virtual baud rates.
+    BAUD_2400 = 1,	///< Sets the baud rate to 2400.
+    BAUD_4800 = 2,	///< Sets the baud rate to 4800.
+    BAUD_9600 = 3,	///< Sets the baud rate to 9600.
+    BAUD_19200 = 4,	///< Sets the baud rate to 19200.
+    BAUD_38400 = 5,	///< Sets the baud rate to 38400.
+    BAUD_57600 = 6,	///< Sets the baud rate to 57600.
+    BAUD_115200 = 7	///< Sets the baud rate to 115200.
+} uart_baud;
+
+/**
+ * \brief Sets the UART baud rate to one of the allowed parameters.
+ *   Possible Baud rates:
+ *    \li 2400
+ *    \li 4800
+ *    \li 9600
+ *    \li 19200
+ *    \li 28800
+ *    \li 38400
+ *    \li 57600
+ *    \li 115200
+ * Returns TRUE if successful.
+**/
+BOOL uartX_set_baud(uart_baud rate);
+
+/**
+ * \brief Returns the baud rate currently being used.
+**/
+uart_baud uartX_get_baud();
+
+/**
+ * \brief Transmits data through UART.
+ * \param c The character to be sent out.
+**/
+
+void uartX_tx(char c);
+
+/**
+ * \brief Returns if the next transmit call will block.
+ * FALSE - Non Blocking.
+ * TRUE - Blocking.
+**/
+
+BOOL uartX_tx_will_block();
+
+/**
+ * \brief Returns how many more bytes can be loaded into the buffer.
+**/
+BYTE uartX_tx_queue_len();
+
+/**
+ * \brief Receives data through UART.
+ * Returns one byte at a time from the queue.
+**/
+char uartX_rx();
+
+/**
+ * \brief Returns if the next receive call will block.
+ * FALSE - Non Blocking.
+ * TRUE - Blocking.
+**/
+BOOL uartX_rx_will_block();
+
+/**
+ * \brief Returns count number of bytes present in the buffer.
+**/
+BYTE uartX_rx_queue_len();
+
+#endif