Vestax Vci 100Mkii

Vestax VCI-100MKII

Vestax went out of business in 2014.

• Product page in archive.org
• Forum thread

Mapping for Mixxx 2.0

[Functions] in brackets are executed if a shift button of the deck is pressed.

1. Set previous effect chain to the EffectUnit [Select EffectUnit1/2]
2. Set next effect chain to the EffectUnit [Select EffectUnit3/4]
3. Parameter1 of Effect1 of the EffectUnit
4. Parameter2 of Effect1 of the EffectUnit
5. Parameter3 of Effect1 of the EffectUnit
6. Wet/dry mix of the EffectUnit
7. EQ high
8. EQ mid
9. EQ low
10. Gain
11. Filter (high pass only)[1]
12. Pitch (semitones only)
13. Rate [Rate by quantized BPM]
14. Channel fader
15. Cross fader
16. Headphone volume
17. Headphone mix
18. Master volume
19. Scratch
20. Jog (locked in slip mode)
21. Play [Adjust beatgrid to the current playposition]
22. Cue [Adjust beatgrid to match another playing deck]
23. Cue and Play [Move beatgrid earlier]
24. Sync mode [Move beatgrid later]
25. Quantize mode [Zoom in waveform]
26. Keylock mode [Zoom out waveform]
27. Loop in the default length (4 beats at the beginning) [Reloop], or in loop Exit the loop [Loop out]
28. Halve the default length,[2] or in loop Halve the loop [Move the loop backward by 1/2 beat]
29. Double the default length, or in loop Double the loop [Move the loop forward by 1/2 beat]
30. Activate [Clear] hotcue1
31. Activate [Clear] hotcue2
32. Activate [Clear] hotcue3
33. Activate [Clear] hotcue4
34. Slip mode (affect scratch, loop and hotcue)
35. PFL [PFL solo] (if headphone mix is cue or master only then switch it)
36. Enable EffectUnit1 [EffectUnit3]
37. Enable EffectUnit2 [EffectUnit4]
38. Up: previous track and scroll, Down: next track and scroll, Left: load to left, Right: load to right, Push: load to first stopped
39. Channel select

Mapping for Mixxx Development

[Functions] in brackets are executed if a shift button of the deck is pressed. {Functions} in braces are executed if a shift button of the other deck is pressed. Changes after the previous version are in bold.

1. Set previous effect chain to the EffectUnit, or if Effect2 is selected Set previous effect to it [Select EffectUnit1/2] {Select Effect1}
2. Set next effect chain to the EffectUnit, or if Effect2 is selected Set next effect to it [Select EffectUnit3/4] {Select Effect2[3]}
3. Parameter1 of Effect1**/2** of the EffectUnit [Set the link[4] to super knob][5]
4. Parameter2 of Effect1**/2** of the EffectUnit [Set the link to super knob]
5. Parameter3 of Effect1**/2** of the EffectUnit [Set the link to super knob]
6. Wet/dry mix of the EffectUnit, or Super knob[6] if any parameters are linked to it
7. EQ high
8. EQ mid
9. EQ low
10. Pitch (up and down to 3 semitones continuously, or in keylock mode discretely)
11. Filter (high pass only)[7]
12. Gain
13. Rate [Rate by quantized BPM]
14. Channel fader
15. Cross fader
16. Headphone volume
17. Headphone mix
18. Master volume
19. Scratch [Brake (if released before full stop, playback resumes)]
20. Jog (locked in slip mode)
21. Play [Reverse]
22. Cue [Adjust beatgrid to the current playposition]
23. Cue and Play [Adjust beatgrid to match another playing deck]
24. Sync mode [Sync key harmonically with another deck]
25. Quantize mode [Zoom out waveform]
26. Keylock mode [Zoom in waveform]
27. Loop in the default length (default to 4 beats) [Reloop], or in loop Exit the loop [Loop out]
28. Halve [Jump backward by] the default length,[8] or in loop Halve [Move it backward by] the loop length
29. Double [Jump forward by] the default length, or in loop Double [Move it forward by] the loop length
30. Activate [Clear] hotcue1
31. Activate [Clear] hotcue2
32. Activate [Clear] hotcue3
33. Activate [Clear] hotcue4
34. Slip mode (affect scratch, brake, pause, reverse, loop and hotcue)
35. PFL [PFL solo] (if headphone mix is cue or master only then switch it)
36. Enable EffectUnit1 [EffectUnit3]
37. Enable EffectUnit2 [EffectUnit4]
38. Up: previous track and scroll, Down: next track and scroll, Left: load to left, Right: load to right, Push: maximize library
39. Channel select

Vestax VCI-100MKII.midi.xml Vestax-VCI-100MKII-scripts.js (2016-11-5, still compatible with 2.0)[9]

1. see the article or use Controller Wizard (choose "Quick Effect Super Knob") for low-high pass

2. no LED: default length = 4, LED29: default length > 4, LED28: 1/4 ≤ default length < 4, LED28 & LED29: default length < 1/4

3. use Deere skin to show the state

4. use Deere skin to show the state

5. left-right inverse -> right inverse -> left inverse -> full inverse -> none -> full -> left -> right -> left-right

6. use Deere skin to show the state

7. see the article or use Controller Wizard (choose "Quick Effect Super Knob") for low-high pass

8. no LED: default length = 4, LED29: default length > 4, LED28: 1/4 ≤ default length < 4, LED28 & LED29: default length < 1/4

9. see Controller Mapping File Locations for use