Vestax Vci 100Mkii

Vestax VCI-100MKII

Vestax went out of business in 2014.

• Product page in archive.org
• ASIO driver for Windows in serato.com
• Forum thread

Mapping for Mixxx 2.0

[Functions] in brackets are executed if a shift button of the deck is pressed.

1. Set previous effect chain to the EffectUnit [Select EffectUnit1/2]
2. Set next effect chain to the EffectUnit [Select EffectUnit3/4]
3. Parameter1 of Effect1 of the EffectUnit
4. Parameter2 of Effect1 of the EffectUnit
5. Parameter3 of Effect1 of the EffectUnit
6. Wet/dry mix of the EffectUnit
7. EQ high
8. EQ mid
9. EQ low
10. Gain
11. Filter (high pass only)[1]
12. Pitch (semitones only)
13. Rate [Rate by quantized BPM]
14. Channel fader
15. Cross fader
16. Headphone volume
17. Headphone mix
18. Master volume
19. Scratch
20. Jog (locked in slip mode)
21. Play [Adjust beatgrid to the current playposition]
22. Cue [Adjust beatgrid to match another playing deck]
23. Cue and Play [Move beatgrid earlier]
24. Sync mode [Move beatgrid later]
25. Quantize mode [Zoom in waveform]
26. Keylock mode [Zoom out waveform]
27. Loop by default loop size[2] [Reloop], or in loop Exit the loop [Set loop out position]
28. Halve default loop size, or in loop Halve the loop [Move the loop backward by 1/2 beat]
29. Double default loop size, or in loop Double the loop [Move the loop forward by 1/2 beat]
30. Activate [Clear] hotcue1
31. Activate [Clear] hotcue2
32. Activate [Clear] hotcue3
33. Activate [Clear] hotcue4
34. Slip mode (affect scratch, loop and hotcue)
35. PFL [PFL solo] (if headphone mix is cue or master only then switch it)
36. Enable EffectUnit1 [EffectUnit3]
37. Enable EffectUnit2 [EffectUnit4]
38. Up: previous track and scroll, Down: next track and scroll, Left: load to left, Right: load to right, Push: load to first stopped
39. Channel select

Mapping for Mixxx Development

[Functions] in brackets are executed if a shift button of the deck is pressed. {Functions} in braces are executed if a shift button of the other deck is pressed. Changes after the previous version are in bold.

1. Set previous effect chain to the EffectUnit, or if EffectSlotN is focused Set previous effect to it [Select EffectUnit1/2] {Clear the EffectUnit/Slot}
2. Set next effect chain to the EffectUnit, or if EffectSlotN is focused Set next effect to it [Select EffectUnit3/4] {Change the focus}
3. Meta knob of the EffectSlot1 [with enable/disabling], or if EffectSlotN is focused Parameter1 of it [Set the link to meta knob][3]
4. Meta knob of the EffectSlot2 [with enable/disabling], or if EffectSlotN is focused Parameter2 of it [Set the link to meta knob]
5. Meta knob of the EffectSlot3 [with enable/disabling], or if EffectSlotN is focused Parameter3 of it [Set the link to meta knob]
6. Super knob of the EffectUnit [with enable/disabling], or if EffectSlotN is focused Parameter4 of it [Set the link to meta knob]
7. EQ high
8. EQ mid
9. EQ low
10. Pitch (up and down to 3 semitones continuously, or in keylock mode discretely)
11. Filter (high pass only)[4]
12. Gain
13. Rate [Rate by quantized BPM]
14. Channel fader
15. Cross fader
16. Headphone volume
17. Headphone mix
18. Master volume
19. Scratch [Brake (if released before full stop, playback resumes)]
20. Jog (locked in slip mode)
21. Play [Reverse]
22. Cue [Adjust beatgrid to the current playposition]
23. Cue and Play [Adjust beatgrid to match another playing deck]
24. Sync mode [Sync key harmonically with another deck]
25. Quantize mode [Zoom out waveform]
26. Keylock mode [Zoom in waveform]
27. Loop by default loop size[5] [Reloop], or in loop Exit the loop [Set loop out position]
28. Halve default loop size [Jump backward], or in loop Halve the loop [Jump it backward] {Halve jump size[6] of the other deck}
29. Double default loop size [Jump forward], or in loop Double the loop [Jump it forward] {Double jump size of the other deck}
30. Activate [Clear] hotcue1
31. Activate [Clear] hotcue2
32. Activate [Clear] hotcue3
33. Activate [Clear] hotcue4
34. Slip mode (affect scratch, brake, pause, reverse, loop and hotcue)
35. PFL [PFL solo] (if headphone mix is cue or master only then switch it)
36. Enable EffectUnit1 [EffectUnit3]
37. Enable EffectUnit2 [EffectUnit4]
38. Up: previous item and scroll, Down: next item and scroll, Left: load to left, Right: load to right, Push: next pane [choose item]
39. Channel select

Vestax VCI-100MKII.midi.xml Vestax-VCI-100MKII-scripts.js (2017-8-1, not compatible with 2.0)[7]

1. see the article or use Controller Wizard (choose "Quick Effect Super Knob") for low-high pass

2. size < 1/4 LED28 & 29, 1/4 ≤ size < 4 LED28, 4 < size ≤ 64 LED29, size > 64 LED28 & 29

3. left-right inverse -> right inverse -> left inverse -> full inverse -> none -> full -> left -> right -> left-right

4. see the article or use Controller Wizard (choose "Quick Effect Super Knob") for low-high pass

5. size < 1/4 LED28 & 29, 1/4 ≤ size < 4 LED28, 4 < size ≤ 64 LED29, size > 64 LED28 & 29

6. size < 1/4 LED28 & 29, 1/4 ≤ size < 4 LED28, 4 < size ≤ 64 LED29, size > 64 LED28 & 29

7. see Controller Mapping File Locations for use