-
Notifications
You must be signed in to change notification settings - Fork 4
/
mos.yml
424 lines (404 loc) · 18.3 KB
/
mos.yml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
type: lib
author: mongoose-os
description: Board configuration defs
config_schema:
- ["board", "o", {title: "Board layout configuration"}]
- ["board.led1.pin", "i", -1, {title: "LED GPIO pin"}]
- ["board.led1.active_high", "b", true, {title: "True if LED is on when output is high (1)"}]
- ["board.led2.pin", "i", -1, {title: "LED GPIO pin"}]
- ["board.led2.active_high", "b", true, {title: "True if LED is on when output is high (1)"}]
- ["board.led3.pin", "i", -1, {title: "LED GPIO pin"}]
- ["board.led3.active_high", "b", true, {title: "True if LED is on when output is high (1)"}]
- ["board.btn1.pin", "i", -1, {title: "Button GPIO pin"}]
- ["board.btn1.pull_up", "b", false, {title: "True if button is pulled up when inactive"}]
- ["board.btn2.pin", "i", -1, {title: "Button GPIO pin"}]
- ["board.btn2.pull_up", "b", false, {title: "True if button is pulled up when inactive"}]
- ["board.btn3.pin", "i", -1, {title: "Button GPIO pin"}]
- ["board.btn3.pull_up", "b", false, {title: "True if button is pulled up when inactive"}]
conds:
- when: mos.platform == "esp32"
apply:
libs:
- location: https://github.com/mongoose-os-libs/bt-common
- location: https://github.com/mongoose-os-libs/wifi
config_schema:
- ["board.led1.pin", 13]
- ["board.btn1.pin", 0]
- ["board.btn1.pull_up", true]
- ["provision.btn.pin", 0]
- ["provision.btn.pull_up", true]
- when: mos.platform == "esp32c3"
apply:
libs:
- location: https://github.com/mongoose-os-libs/bt-common
- location: https://github.com/mongoose-os-libs/wifi
# https://www.olimex.com/Products/IoT/ESP32/ESP32-EVB/open-source-hardware
- when: build_vars.BOARD == "ESP32-EVB"
apply:
libs:
- location: https://github.com/mongoose-os-libs/ethernet
config_schema:
- ["eth.enable", true]
- ["board.led1.pin", 32] # REL1
- ["board.led2.pin", 33] # REL2
- ["board.btn1.pin", 34] # BUT1
- ["board.btn1.pull_up", true]
- ["provision.btn.pin", 34]
- ["provision.btn.pull_up", true]
# https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/open-source-hardware
- when: build_vars.BOARD == "ESP32-POE"
apply:
libs:
- location: https://github.com/mongoose-os-libs/ethernet
config_schema:
- ["eth.enable", true]
- ["eth.clk_mode", 3] # GPIO17
- ["eth.phy_pwr_gpio", 12]
- ["board.btn1.pin", 34] # BUT1
- ["board.btn1.pull_up", true]
- ["provision.btn.pin", 34]
- ["provision.btn.pull_up", true]
# There is no LED on this board, but we define GPIO13 for it.
# GPIO13 is pin 10 on the EXT2 connector. There's an easily accessible
# ground pad nearby (unpopulated C21).
- ["board.led1.pin", 13]
- ["provision.led.pin", 13]
# https://github.com/LilyGO/T-Koala
- when: build_vars.BOARD == "T-Koala"
apply:
config_schema:
# There's no physical button on the board
- ["board.btn1.pin", 0]
- ["board.btn1.pull_up", true]
- ["provision.btn.pin", 0]
- ["provision.btn.pull_up", true]
# Green LED on GPIO5
- ["board.led1.pin", 5]
- ["provision.led.pin", 5]
# Board is based on WRover module with 4MB SPIRAM, enable it.
build_vars:
ESP_IDF_SDKCONFIG_OPTS: >
${build_vars.ESP_IDF_SDKCONFIG_OPTS}
CONFIG_SPIRAM_SUPPORT=y
CONFIG_SPIRAM_IGNORE_NOTFOUND=y
CONFIG_SPIRAM_BOOT_INIT=y
CONFIG_SPIRAM_CACHE_WORKAROUND=y
CONFIG_SPI_MASTER_IN_IRAM=y
CONFIG_BT_ALLOCATION_FROM_SPIRAM_FIRST=y
CONFIG_WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST=y
- when: mos.platform == "esp8266"
apply:
libs:
- location: https://github.com/mongoose-os-libs/wifi
config_schema:
- ["board.led1.pin", 2]
- ["board.led1.active_high", false]
- ["board.btn1.pin", 0]
- ["board.btn1.pull_up", true]
- ["provision.btn.pin", 0]
- ["provision.btn.pull_up", true]
- ["provision.led.pin", 2]
- ["provision.led.active_high", false]
- when: build_vars.BOARD == "esp8266-1M"
apply:
build_vars:
FLASH_SIZE: 1048576
config_schema:
- ["mjs.generate_jsc", false]
- when: build_vars.BOARD == "esp8266-2M"
apply:
build_vars:
FLASH_SIZE: 2097152
config_schema:
- ["mjs.generate_jsc", false]
- when: mos.platform == "cc3200" # CC3200-LAUNCHXL
apply:
libs:
- location: https://github.com/mongoose-os-libs/wifi
config_schema:
- ["board.led1.pin", 64] # D7 (red)
- ["board.led2.pin", 1] # D6 (yellow)
- ["board.led3.pin", 2] # D5 (green)
- ["board.btn1.pin", 15] # SW2
- ["board.btn2.pin", 4] # SW3
- ["provision.btn.pin", 4] # SW3
- ["provision.led.pin", 2] # D5 (green)
- when: mos.platform == "cc3220" # CC3220F-LAUNCHXL
apply:
libs:
- location: https://github.com/mongoose-os-libs/wifi
config_schema:
- ["board.led1.pin", 64] # D7 (red)
- ["board.led2.pin", 1] # D6 (yellow)
- ["board.led3.pin", 2] # D5 (green)
- ["board.btn1.pin", 15] # SW2
- ["board.btn2.pin", 4] # SW3
- ["provision.btn.pin", 4] # SW3
- ["provision.led.pin", 2] # D5 (green)
- when: mos.platform == "rs14100"
apply:
libs:
- location: https://github.com/mongoose-os-libs/wifi
build_vars:
FREERTOS_PORT: GCC/ARM_CM4F
MGOS_ROOT_DEVTAB: >
qspi0 rsi1x_flash {"cs": 0} |
boot part {"dev": "qspi0", "offset": 0x12000, "size": 0xc000} |
bcfg0 part {"dev": "qspi0", "offset": 0x1e000, "size": 0x1000} |
bcfg1 part {"dev": "qspi0", "offset": 0x1f000, "size": 0x1000} |
# Reserved: 0x20000 |
fs0 part {"dev": "qspi0", "offset": 0x40000, "size": 0x40000} |
fs1 part {"dev": "qspi0", "offset": 0x80000, "size": 0x40000} |
fsF part {"dev": "qspi0", "offset": 0xc0000, "size": 0x40000} |
app0 part {"dev": "qspi0", "offset": 0x100000, "size": 0x100000} |
app1 part {"dev": "qspi0", "offset": 0x200000, "size": 0x100000} |
appF part {"dev": "qspi0", "offset": 0x300000, "size": 0x100000}
MGOS_BL_BIN: "$(MGOS_PLATFORM_PATH)/bin/bootloader.bin"
MGOS_ROOT_FS_TYPE: LFS
MGOS_ROOT_FS_SIZE: 0x40000
# 128K SRAM is the baseline present in all variants of the chip.
# There may be much more but there's no way to tell upfront.
# Override this if you know your chip has more SRAM.
RS14100_SRAM_SIZE: 131072
- when: build_vars.BOARD == "EVK1.3"
apply:
config_schema:
- ["board.led1.pin", 0x100] # ULP0 (TRI LED, green)
- ["board.led1.active_high", false]
- ["board.led2.pin", 0x102] # ULP2 (TRI LED, blue)
- ["board.led2.active_high", false]
- ["provision.led.pin", 0x102] # ULP2 (TRI LED, blue)
- ["provision.led.active_high", false]
- when: build_vars.BOARD == "B-L475E-IOT01A"
apply:
libs:
- location: https://github.com/mongoose-os-libs/freertos
- location: https://github.com/mongoose-os-libs/wifi-ism43xxx
config_schema:
- ["board.led1.pin", 0x05] # PA5 (LD1, green)
- ["board.led2.pin", 0x1e] # PB14 (LD2, green)
- ["board.led3.pin", 0x29] # PC9 (1 = LD3 (yellow), 0 = LD4 (blue))
- ["board.btn1.pin", 0x2d] # PC13
- ["provision.btn.pin", 0x2d] # PC13
- ["provision.btn.pull_up", true]
- ["provision.led.pin", 0x1e] # PC13 (LD2, green)
- ["debug.stdout_uart", 1]
- ["debug.stderr_uart", 1]
- ["i2c.sda_gpio", 0x1b] # PB11 (internal I2C bus, where the sensors are)
- ["i2c.scl_gpio", 0x1a] # PB10
- ["i2c1.sda_gpio", 0x19] # PB9 (external I2C bus, exposed on the Arduino connector)
- ["i2c1.scl_gpio", 0x18] # PB8
- ["rpc.uart.uart_no", 1]
# PC11.6 PC12.6 PC10.6
- ["wifi.ism43xxx.spi", '{"unit_no": 3, "miso_gpio": 0x6002b, "mosi_gpio": 0x6002c, "sclk_gpio": 0x6002a}']
- ["wifi.ism43xxx.cs_gpio", 0x40] # CS = PE0
- ["wifi.ism43xxx.drdy_gpio", 0x41] # DRDY = PE1
- ["wifi.ism43xxx.rst_gpio", 0x48] # RST = PE8
- ["wifi.ism43xxx.boot0_gpio", 0x1c] # BOOT0 = PB12
- ["wifi.ism43xxx.wakeup_gpio", 0x1d] # WAKEUP = PB13
build_vars:
DEVICE: stm32l475vg
HSE_VALUE: 0
LSE_VALUE: 32768
MGOS_DEBUG_UART: 1
MGOS_BL_BIN: "$(MGOS_PLATFORM_PATH)/bin/bootloader-B-L475E-IOT01A.bin"
FLASH_BL_SIZE: 0x10000
FLASH_BL_CFG_SIZE: 0
FREERTOS_PORT: GCC/ARM_CM4F
MGOS_ROOT_DEVTAB: >
sysf0 stm32flash {} |
extf0 spi_flash {"cs": 0, "freq": 20000000,
"spi": {"unit_no": 0x81,
"mosi_gpio": 0xa004c, "miso_gpio": 0xa004d, "sclk_gpio": 0xa004a,
"cs0_gpio": 0x4b, "qspi_io2": 0xa004e, "qspi_io3": 0xa004f}} |
app0 part {"dev": "sysf0", "offset": 0x10000, "size": 0xf0000} |
bcfg0 part {"dev": "extf0", "offset": 0, "size": 0x1000} |
bcfg1 part {"dev": "extf0", "offset": 0x1000, "size": 0x1000} |
# Reserved: 56K |
app1 part {"dev": "extf0", "offset": 0x10000, "size": 0x100000} |
appT part {"dev": "extf0", "offset": 0x110000, "size": 0x100000} |
appF part {"dev": "extf0", "offset": 0x210000, "size": 0x100000} |
fs0 part {"dev": "extf0", "offset": 0x310000, "size": 0x40000} |
fs1 part {"dev": "extf0", "offset": 0x350000, "size": 0x40000} |
fsF part {"dev": "extf0", "offset": 0x390000, "size": 0x40000} |
data part {"dev": "extf0", "offset": 0x3d0000}
MGOS_ROOT_FS_TYPE: LFS
MGOS_ROOT_FS_SIZE: 0x40000
MGOS_ROOT_FS_EXTRACT: 1
MGOS_ROOT_FS_ON_SYS_FLASH: 0
cdefs:
MGOS_BOOT_APP0_OFFSET: 0x10000
- when: build_vars.BOARD == "DISCO-F746NG"
apply:
libs:
- location: https://github.com/mongoose-os-libs/ethernet
- location: https://github.com/mongoose-os-libs/freertos
config_schema:
- ["board.led1.pin", 0x81] # PI1 (green)
- ["board.btn1.pin", 0x8b] # PI11
- ["provision.btn.pin", 0x8b] # PI11
- ["provision.led.pin", 0x81] # PI1
- ["debug.stdout_uart", 1]
- ["debug.stderr_uart", 1]
- ["rpc.uart.uart_no", 1]
- ["eth.enable", true]
build_vars:
DEVICE: stm32f746ng
HSE_VALUE: 0
LSE_VALUE: 32768
MGOS_DEBUG_UART: 1
MGOS_BL_BIN: "$(MGOS_PLATFORM_PATH)/bin/bootloader-DISCO-F746NG.bin"
FLASH_BL_SIZE: 0x10000
FLASH_BL_CFG_SIZE: 0
FREERTOS_PORT: GCC/ARM_CM7/r0p1
MGOS_ROOT_DEVTAB: >
sysf0 stm32flash {} |
extf0 spi_flash {"cs": 0, "freq": 20000000,
"spi": {"unit_no": 0x81,
"mosi_gpio": 0x9003b, "miso_gpio": 0x9003c, "sclk_gpio": 0x90012,
"cs0_gpio": 0x16, "qspi_io2": 0x90042, "qspi_io3": 0x9003d}} |
app0 part {"dev": "sysf0", "offset": 0x10000, "size": 0xf0000} |
bcfg0 part {"dev": "extf0", "offset": 0, "size": 0x1000} |
bcfg1 part {"dev": "extf0", "offset": 0x1000, "size": 0x1000} |
# Reserved: 56K |
app1 part {"dev": "extf0", "offset": 0x10000, "size": 0x100000} |
appT part {"dev": "extf0", "offset": 0x110000, "size": 0x100000} |
appF part {"dev": "extf0", "offset": 0x210000, "size": 0x100000} |
fs0 part {"dev": "extf0", "offset": 0x310000, "size": 0x40000} |
fs1 part {"dev": "extf0", "offset": 0x350000, "size": 0x40000} |
fsF part {"dev": "extf0", "offset": 0x390000, "size": 0x40000} |
data part {"dev": "extf0", "offset": 0x3d0000}
MGOS_ROOT_FS_TYPE: LFS
MGOS_ROOT_FS_SIZE: 0x40000
MGOS_ROOT_FS_EXTRACT: 1
MGOS_ROOT_FS_ON_SYS_FLASH: 0
cdefs:
MGOS_BOOT_APP0_OFFSET: 0x10000
STM32_ETH_PHY: STM32_ETH_PHY_LAN8742A
STM32_ETH_MAC_PIN_REF_CLK: 'STM32_PIN\(STM32_GPIO_PORT_A,1,11\)'
STM32_ETH_MAC_PIN_MDC: 'STM32_PIN\(STM32_GPIO_PORT_C,1,11\)'
STM32_ETH_MAC_PIN_MDIO: 'STM32_PIN\(STM32_GPIO_PORT_A,2,11\)'
STM32_ETH_MAC_PIN_CRS_DV: 'STM32_PIN\(STM32_GPIO_PORT_A,7,11\)'
STM32_ETH_MAC_PIN_RXD0: 'STM32_PIN\(STM32_GPIO_PORT_C,4,11\)'
STM32_ETH_MAC_PIN_RXD1: 'STM32_PIN\(STM32_GPIO_PORT_C,5,11\)'
STM32_ETH_MAC_PIN_TXD0: 'STM32_PIN\(STM32_GPIO_PORT_G,13,11\)' # !
STM32_ETH_MAC_PIN_TXD1: 'STM32_PIN\(STM32_GPIO_PORT_G,14,11\)'
STM32_ETH_MAC_PIN_TXD_EN: 'STM32_PIN\(STM32_GPIO_PORT_G,11,11\)'
- when: build_vars.BOARD == "NUCLEO-F746ZG"
apply:
libs:
- location: https://github.com/mongoose-os-libs/ethernet
- location: https://github.com/mongoose-os-libs/freertos
config_schema:
- ["board.led1.pin", 0x1e] # PB14 (LD3, red)
- ["board.led2.pin", 0x17] # PB7 (LD2, blue)
- ["board.led3.pin", 0x10] # PB0 (LD1, green)
- ["board.btn1.pin", 0x2d] # PC13
- ["provision.btn.pin", 0x2d] # PC13
- ["provision.led.pin", 0x17] # PB7 (LD2, blue)
- ["debug.stdout_uart", 3]
- ["debug.stderr_uart", 3]
- ["rpc.uart.uart_no", 3]
- ["eth.enable", true]
build_vars:
DEVICE: stm32f746zg
HSE_VALUE: 8000000
LSE_VALUE: 32768
MGOS_DEBUG_UART: 3
FLASH_BL_SIZE: 0
FLASH_BL_CFG_SIZE: 0
FREERTOS_PORT: GCC/ARM_CM7/r0p1
MGOS_ROOT_DEVTAB: >
fs0 stm32flash {"offset": 0x8000, "size": 0x10000, "ese": true}
MGOS_ROOT_FS_TYPE: SPIFFS
MGOS_ROOT_FS_SIZE: 0x10000
MGOS_ROOT_FS_OPTS: '{"bs": 4096, "is": 128}'
MGOS_ROOT_FS_EXTRACT: 0
MGOS_ROOT_FS_ON_SYS_FLASH: 1
cdefs:
STM32_ETH_PHY: STM32_ETH_PHY_LAN8742A
STM32_ETH_MAC_PIN_REF_CLK: 'STM32_PIN\(STM32_GPIO_PORT_A,1,11\)'
STM32_ETH_MAC_PIN_MDC: 'STM32_PIN\(STM32_GPIO_PORT_C,1,11\)'
STM32_ETH_MAC_PIN_MDIO: 'STM32_PIN\(STM32_GPIO_PORT_A,2,11\)'
STM32_ETH_MAC_PIN_CRS_DV: 'STM32_PIN\(STM32_GPIO_PORT_A,7,11\)'
STM32_ETH_MAC_PIN_RXD0: 'STM32_PIN\(STM32_GPIO_PORT_C,4,11\)'
STM32_ETH_MAC_PIN_RXD1: 'STM32_PIN\(STM32_GPIO_PORT_C,5,11\)'
STM32_ETH_MAC_PIN_TXD0: 'STM32_PIN\(STM32_GPIO_PORT_G,13,11\)'
STM32_ETH_MAC_PIN_TXD1: 'STM32_PIN\(STM32_GPIO_PORT_B,13,11\)' # !
STM32_ETH_MAC_PIN_TXD_EN: 'STM32_PIN\(STM32_GPIO_PORT_G,11,11\)'
- when: build_vars.BOARD == "Electron"
apply:
libs:
- location: https://github.com/mongoose-os-libs/freertos
- location: https://github.com/mongoose-os-libs/pppos
config_schema:
- ["board.led1.pin", 0x01] # PA1 (RGB, red)
- ["board.led1.active_high", false]
- ["board.led2.pin", 0x02] # PA2 (RGB, green)
- ["board.led2.active_high", false]
- ["board.led3.pin", 0x03] # PA3 (RGB, blue)
- ["board.led3.active_high", false]
- ["board.btn1.pin", 0x27] # PC7
- ["provision.btn.pin", 0x27] # PC7
- ["provision.btn.pull_up", true]
- ["provision.led.pin", 0x03] # PA3 (RGB, blue)
- ["provision.led.active_high", false]
- ["debug.stdout_uart", 1]
- ["debug.stderr_uart", 1]
- ["i2c.sda_gpio", 0x16] # PB6
- ["i2c.scl_gpio", 0x17] # PB7
- ["i2c1.sda_gpio", 0x18] # PB8
- ["i2c1.scl_gpio", 0x19] # PB9
# Modem is u-blox SARA-U2x0
- ["pppos.enable", true]
- ["pppos.uart_no", 3]
- ["pppos.rx_gpio", 0x7001b] # PB11
- ["pppos.tx_gpio", 0x7001a] # PB10
- ["pppos.cts_gpio", 0x7001d] # PB13
- ["pppos.rts_gpio", 0x7001e] # PB14
- ["pppos.baud_rate", 460800]
- ["pppos.fc_enable", true]
- ["pppos.dtr_gpio", 0x1f] # PB15
- ["pppos.rst_gpio", 0x24] # PC4
- ["pppos.rst_act", 0]
- ["pppos.rst_hold_ms", 100]
- ["pppos.rst_wait_ms", 4000]
# Sometimes modem just doesn't come back after reset.
# Works fine on subsequent attempts.
- ["pppos.rst_mode", 1]
- ["rpc.uart.uart_no", 1]
build_vars:
DEVICE: stm32f205rg
HSE_VALUE: 26000000
LSE_VALUE: 32768
MGOS_DEBUG_UART: 1
MGOS_ENABLE_LWIP: 1
MGOS_BL_BIN: "$(MGOS_PLATFORM_PATH)/bin/bootloader-Electron.bin"
FLASH_BL_SIZE: 0x10000
FLASH_BL_CFG_SIZE: 0
FREERTOS_PORT: GCC/ARM_CM3
MGOS_ROOT_DEVTAB: >
sysf0 stm32flash {} |
extf0 spi_flash {"cs": 0, "freq": 20000000,
"spi": {"unit_no": 1, "mosi_gpio": 0x50007, "miso_gpio": 0x50006,
"sclk_gpio": 0x50005, "cs0_gpio": 0x22}} |
app0 part {"dev": "sysf0", "offset": 0x10000, "size": 0xf0000} |
bcfg0 part {"dev": "extf0", "offset": 0, "size": 0x1000} |
bcfg1 part {"dev": "extf0", "offset": 0x1000, "size": 0x1000} |
# Reserved: 56K |
app1 part {"dev": "extf0", "offset": 0x10000, "size": 0x100000} |
appT part {"dev": "extf0", "offset": 0x110000, "size": 0x100000} |
appF part {"dev": "extf0", "offset": 0x210000, "size": 0x100000} |
fs0 part {"dev": "extf0", "offset": 0x310000, "size": 0x40000} |
fs1 part {"dev": "extf0", "offset": 0x350000, "size": 0x40000} |
fsF part {"dev": "extf0", "offset": 0x390000, "size": 0x40000} |
data part {"dev": "extf0", "offset": 0x3d0000}
MGOS_ROOT_FS_TYPE: LFS
MGOS_ROOT_FS_SIZE: 0x40000
MGOS_ROOT_FS_EXTRACT: 1
MGOS_ROOT_FS_ON_SYS_FLASH: 0
cdefs:
MGOS_BOOT_APP0_OFFSET: 0x10000
# There is a special hack in mos to make overrides work properly.
manifest_version: 2018-09-24
no_implicit_init_deps: true