https://github.com/ndroid/TinyIRremote
Adaptation of TinyIRReceiver from Arduino IRRemote library https://github.com/Arduino-IRremote/ Modified to work with MSP432 boards in Energia and add IR transmit.
*Define IR_FEEDBACK_LED_PIN to change default feedback LED pin
*Define DO_NOT_USE_FEEDBACK_LED to save 12 bytes and reduce ISR handling time
*By default, repeats are included and decodeIR() returns all commands. Define EXCLUDE_REPEATS to ignore repeats in decodeIR() and return only new commands.
*Define HANDLE_IR_EVENT in order to provide user-defined handler for IR event.
If enabled, must define
void handleReceivedTinyIRData(uint16_t aAddress, uint8_t aCommand, bool isRepetition)
This function is called if a complete command was received, regardless if it is
a repeat (not impacted by EXCLUDE_REPEATS constant).
!!!!!!!!!!!!!!!!!!!!!!
Function called in interrupt context - should be running as short as possible, so if you
require longer action, save the data (address + command) and handle it in the main loop.
!!!!!!!!!!!!!!!!!!!!!
*For IR receiver, IR input pin must be specified in call to initTinyIRReceiver() - returns true on success.
Any GPIO pin which supports interrupts may be used.
bool initTinyIRReceiver(uint8_t aRcvPin, bool aEnableLEDFeedback = false, uint8_t aFeedbackLEDPin = USE_DEFAULT_FEEDBACK_LED_PIN)
*For IR transmitter, declare an IRsend object and initialize with
bool IRsend::begin(uint8_t aSendPin, bool aEnableLEDFeedback = false, uint8_t aFeedbackLEDPin = USE_DEFAULT_FEEDBACK_LED_PIN)
Supported send pins include:
pin# port.pin timer
3 P3.2 mappable
4 P3.3 mappable
11 P3.6 mappable
17 P5.7 TA2.2
18 P3.0 mappable
19 P2.5 TA0.2/mappable
31 P3.7 mappable
32 P3.5 mappable
34 P2.3 TA1.1/mappable
35 P6.7 TA2.4
36 P6.6 TA2.3
37 P5.6 TA2.1
38 P2.4 TA0.1/mappable
39 P2.6 TA0.3/mappable
40 P2.7 TA0.4/mappable
*Both IR receive and transmit use IRData struct, defined as
struct {
decode_type_t protocol; ///< UNKNOWN, NEC, SONY, RC5, ...
uint16_t address; ///< Decoded address
uint16_t command; ///< Decoded command
bool isRepeat;
}