Skip to content

neurodebian/dcm2niix

 
 

Repository files navigation

About

dcm2niix is a designed to convert neuroimaging data from the DICOM format to the NIfTI format. For details and compiled versions visit the NITRC wiki

License

This software is open source. The bulk of the code is covered by the BSD license. Some units are either public domain or have similar licenses. See the license.txt file for more details.

Versions

6-June-2016

  • Re-enable custom output directory "-o" option broken by 30-Apr-2016 version
  • Deal with mis-behaved GE CT images where slice direction across images is not consistent.

5-May-2016

  • Crop 3D T1 acquisitions (e.g. ./dcm2niix -x y ~/DICOM).

30-Apr-2016

  • Convert multiple files/folders with single command line invocation (e.g. ./dcm2niix -b y ~/tst ~/tst2).

22-Apr-2016

  • Detect Siemens Phase maps (phase image names end with "_ph").
  • Use current working directory if file name not specified.

12-Apr-2016

  • Provide override (command line option "-m y") to stack images of the same series even if they differ in study date/time, echo/coil number, or slice orientation. This mechanism allows users to concatenate images that break strict DICOM compliance.

22-Mar-2016

12-Dec-2015

  • Support PAR/REC FP values when possible (see PMC3998685).

11-Nov-2015

  • Minor refinements.

12-June-2015

  • Uses less memory (helpful for large datasets).

2-Feb-2015

  • Support for Visual Studio.
  • Remove dependency on zlib (now uses miniz).

1-Jan-2015

  • Images separated based on TE (fieldmaps).
  • Support for JPEG2000 using OpenJPEG or Jasper libraries.
  • Support for JPEG using NanoJPEG library.
  • Support for lossless JPEG using custom library.

24-Nov-2014

  • Support for CT scans with gantry tilt and varying distance between slices.

11-Oct-2014

  • Initial public release.

Running

See help: dcm2niix -h e.g. dcm2niix /path/to/dicom/folder

Optional batch processing version:

Perform a batch conversion of multiple dicoms using the configurations specified in a yaml file.

dcm2niibatch run_configuration.yaml

The configuration file should be in yaml format as shown in example run_configuration.yaml

Options:
  isGz:             false
  isFlipY:          false
  isVerbose:        false
  isCreateBIDS:     false
  isOnlySingleFile: false
Files:
    -
      in_dir:           /path/to/first/folder
      out_dir:          /path/to/output/folder
      filename:         dcemri
    -
      in_dir:           /path/to/second/folder
      out_dir:          /path/to/output/folder
      filename:         fa3

You can add as many files as you want to convert as long as this structure stays consistent. Note that a dash must separate each file.

Build

Build command line version with cmake (Linux, Windows, OSx)

mkdir build
cd build
cmake ..

dcm2niix will be created in the bin folder

optional batch processing version:

The batch processing binary dcm2niibatch is optional. To build dcm2niibatch as well change the cmake command to cmake -DBATCH_VERSION=ON ..

This requires the following libraries:

  • pkg-config
  • yaml-cpp
  • a compiler that supports c++11

e.g. the dependencies can be installed on Ubuntu 14.04 by running

sudo apt-get install pkg-config libyaml-cpp-dev libyaml-cpp0.5 cmake

Building the command line version without cmake

This requires a C compiler. With a terminal, change directory to the 'console' folder and run the following:

DEFAULT BUILD
g++ -O3 -DmyDisableOpenJPEG -I. main_console.cpp nii_dicom.cpp nifti1_io_core.cpp nii_ortho.cpp nii_dicom_batch.cpp jpg_0XC3.cpp ujpeg.cpp -dead_strip -o dcm2niix
ZLIB BUILD

If we have zlib, we can use it (-lz) and disable miniz (-myDisableMiniZ)

g++ -O3 -DmyDisableOpenJPEG -I. main_console.cpp nii_dicom.cpp nifti1_io_core.cpp nii_ortho.cpp nii_dicom_batch.cpp jpg_0XC3.cpp ujpeg.cpp -dead_strip -o dcm2niix -lz -DmyDisableMiniZ
MINGW BUILD

If you use the (obsolete) compiler MinGW on Windows you will want to include the rare libgcc libraries with your executable so others can use it. Here I also demonstrate the optional "-DmyDisableZLib" to remove zip support.

g++ -O3 -s -DmyDisableOpenJPEG -DmyDisableZLib -I. main_console.cpp nii_dicom.cpp nifti1_io_core.cpp nii_ortho.cpp nii_dicom_batch.cpp jpg_0XC3.cpp ujpeg.cpp -o dcm2niix  -static-libgcc
JPEG2000 BUILD

If you want to build this with JPEG2000 decompression support using OpenJPEG. You will need to have the OpenJPEG 2.1 libraries installed (https://code.google.com/p/openjpeg/wiki/Installation). I suggest building static libraries... svn checkout http://openjpeg.googlecode.com/svn/trunk/ openjpeg-read-only cmake -DBUILD_SHARED_LIBS:bool=off . make sudo make install You should then be able to run then run:

g++ -O3 -dead_strip -I. main_console.cpp nii_dicom.cpp nifti1_io_core.cpp nii_ortho.cpp nii_dicom_batch.cpp  jpg_0XC3.cpp ujpeg.cpp -o dcm2niix -lopenjp2

But in my experience this works best if you explicitly tell the software how to find the libraries, so your compile will probably look like one of these two options:

g++ -O3 -dead_strip -I. main_console.cpp nii_dicom.cpp nifti1_io_core.cpp nii_ortho.cpp nii_dicom_batch.cpp jpg_0XC3.cpp ujpeg.cpp -o dcm2niix  -I/usr/local/include /usr/local/lib/libopenjp2.a
g++ -O3 -dead_strip -I. main_console.cpp nii_dicom.cpp nifti1_io_core.cpp nii_ortho.cpp nii_dicom_batch.cpp jpg_0XC3.cpp ujpeg.cpp -o dcm2niix  -I/usr/local/lib /usr/local/lib/libopenjp2.a

If you want to build this with JPEG2000 decompression support using Jasper: You will need to have the Jasper (http://www.ece.uvic.ca/~frodo/jasper/) and libjpeg (http://www.ijg.org) libraries installed which for Linux users may be as easy as running 'sudo apt-get install libjasper-dev' (otherwise, see http://www.ece.uvic.ca/~frodo/jasper/#doc). You can then run:

g++ -O3 -DmyDisableOpenJPEG -DmyEnableJasper -I. main_console.cpp nii_dicom.cpp nifti1_io_core.cpp nii_ortho.cpp nii_dicom_batch.cpp jpg_0XC3.cpp ujpeg.cpp  -s -o dcm2niix -ljasper -ljpeg
VISUAL STUDIO BUILD

This software can be compiled with VisualStudio 2015. This example assumes the compiler is in your path.

vcvarsall amd64
cl /EHsc main_console.cpp nii_dicom.cpp jpg_0XC3.cpp ujpeg.cpp nifti1_io_core.cpp nii_ortho.cpp nii_dicom_batch.cpp -DmyDisableOpenJPEG -DmyDisableJasper /odcm2niix
OSX BUILD WITH BOTH 32 AND 64-BIT SUPPORT

Building command line version universal binary from OSX 64 bit system: This requires a C compiler. With a terminal, change directory to the 'conosle' folder and run the following:

g++ -O3 -DmyDisableOpenJPEG -I. main_console.cpp nii_dicom.cpp nifti1_io_core.cpp nii_ortho.cpp nii_dicom_batch.cpp jpg_0XC3.cpp ujpeg.cpp -dead_strip -arch i386 -o dcm2niix32
g++ -O3 -DmyDisableOpenJPEG -I. main_console.cpp nii_dicom.cpp nifti1_io_core.cpp nii_ortho.cpp nii_dicom_batch.cpp jpg_0XC3.cpp ujpeg.cpp -dead_strip -o dcm2niix64
lipo -create dcm2niix32 dcm2niix64 -o dcm2niix

To validate that the resulting executable supports both architectures type

file ./dcm2niix
OSX GRAPHICAL INTERFACE BUILD

Building OSX graphical user interface using XCode: Copy contents of "console" folder to /xcode/dcm2/core Open and compile "dcm2.xcodeproj" with XCode 4.6 or later

THE QT AND wxWIDGETS GUIs ARE NOT YET SUPPORT - FOLLOWING LINES FOR FUTURE VERSIONS

Building QT graphical user interface: Open "dcm2.pro" with QTCreator. This should work on OSX and Linux. On Windows the printf information is not redirected to the user interface If compile gives you grief look at the .pro file which has notes for different operating systems.

Building using wxWidgets wxWdigets makefiles are pretty complex and specific for your operating system. For simplicity, we will build the "clipboard" example that comes with wxwidgets and then substitute our own code. The process goes something like this. a.) Install wxwdigets b.) successfully "make" the samples/clipboard program c.) DELETE console/makefile. WE DO NOT WANT TO OVERWRITE the WX MAKEFILE d.) with the exception of "makefile", copy the contents of console to /samples/clipboard e.) overwrite the original /samples/clipboard.cpp with the dcm2niix file of the same name f.) Older XCodes have problems with .cpp files, whereas wxWidgets's makefiles do not compile with "-x cpp". So the core files are called '.c' but we will rename them to .cpp for wxWidgets: rename 's/.c$/.cpp/' * g.) edit the /samples/clipboard makefile: Add "nii_dicom.o nifti1_io_core.o nii_ortho.o nii_dicom_batch.o " to CLIPBOARD_OBJECTS: CLIPBOARD_OBJECTS =
nii_dicom.o nifti1_io_core.o nii_ortho.o nii_dicom_batch.o
$(__clipboard___win32rc)
$(__clipboard_os2_lib_res)
clipboard_clipboard.o h.) edit the /samples/clipboard makefile: With wxWidgets we will capture std::cout comments, not printf, so we need to add "-DDmyUseCOut" to CXXFLAGS: CXXFLAGS = -DmyUseCOut -DWX_PRECOMP .... i.) For a full refresh rm clipboard rm *.o make

About

dcm2nii DICOM to NIfTI converter: compiled versions available from NITRC

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 62.2%
  • C++ 31.9%
  • Pascal 4.6%
  • Objective-C 0.9%
  • CMake 0.2%
  • QMake 0.1%
  • Other 0.1%